Parts for Craftsman 24A-495D099 / 2002: General Assembly Parts

Replacement axle shaft for chipper shredders. Installs through wheel assembly to support roller movement. Order when original is bent, broken, or worn.

Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.

Flat washer for lawn mowers and tractors. Replace if missing, corroded, or damaged during maintenance. Ensures secure fastening of components.

Hex head screw for lawn mowers and outdoor power equipment. Replaces lost, stripped, or corroded fasteners. 1/4-20 thread size for secure assembly.

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.

This three arm knob is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn and garden machines as an adjustment handle, often for seat adjustment. The three sides of the knob make it easy to grasp and turn. The long threaded shaft ensures the knob is securely attached to the part it is used to adjust and has ample room for turning and adjusting. Over time, the plastic arms of the knob may deteriorate and crack making it difficult to turn. Cracks in the plastic can cause cuts and scratches. If the plastic breaks completely off, the handle will not be useable and should be replaced. If the plastic is broken, a pair of vise grips will be needed to remove the shaft of the handle. Once the handle is removed, line the threaded end of the handle up with the hole and turn it to tighten it in place. Don't over tighten as it could cause the threads to strip and not be usable.This three arm knob is a black plastic and metal part that is sold individually. It is designed for use in lawn and garden equipment that is manufactured by Husky, Craftsman, and Yard Machines.

Flat washer for lawn mowers and outdoor power equipment. Replaces worn, missing, or damaged washers during maintenance and repair. Essential hardware part.

Replacement screen blade for chipper shredders. Controls shred size and protects engine components. Replace if cracked, damaged, or broken from debris impact.

This is a genuine replacement pin clip for select models of chipper-shredder equipment. This pin clip is a specialty part that is responsible for helping to secure the blade bail. If the blade bail cannot be secured, it will be difficult or impossible to operate the machine. This is a safety part that is required for operation and if it is missing or damaged, it needs to be replaced immediately. This pin clip is small and can become worn, corroded, or lost over time. A genuine part like this offers an exact replacement for compatible models. This genuine OEM pin clip is manufactured by MTD and meets exact standards to offer an identical replacement for select chipper/shredder units from the brand, along with those from Troy-Bilt, Yard Machines, Huskee, and Cub Cadet. There are over 150 chippers that will take this part, but it may have different locations depending on the model. Owners should consult the parts diagram for the exact location of this clip prior to replacement. This is sold as an individual item. Additional hardware and parts will require a separate purchase. To replace the pin clip, a screwdriver and pliers will be necessary.

This is a spiral roll pin measuring 0.156 inches in diameter and 1 inch in length, used to secure rotating components on chipper shredders and lawn vacuums. It holds parts in alignment on shafts and prevents slippage during operation. Replace this pin if it is sheared, bent, or missing, which can cause loose or non-functioning attachments.

This is a replacement screw for lawn and garden equipment that is typically used on the blades. The flat head of the screw ensures that they will sit flush once they have been installed. These screws, which have hex-socket heads, are often found on the blades of chippers and shredders. If a blade is loose, it could be a problem with the screws that are holding it in place. This could make the machine inefficient and even dangerous to operate. Therefore, if there are screws that are worn down or that are no longer doing their job, it is important to replace them. It is essential to use the appropriate screws for a repair. This is a genuine OEM sourced replacement part that comes from the manufacturer. This helps to ensure quality and compatibility. The screw is sold individually. It is compatible with a range of chippers and shredders from MTD, Troy-Bilt, Cub Cadet, Ryobi, Yard-Man, Yard Machines, and Mastercut.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

If your chipper isn't shredding grass and debris effectively, replace the worn flail blade. Attaches to impeller assembly for efficient shredding.

Flat washer for lawn mowers, tractors, and outdoor power equipment. Replaces worn, missing, or damaged washers during assembly or repair work.

This genuine OEM replacement part is a push cap designed for snowblower, tiller, and edger wheel assemblies. A push cap is a special type of nut, or fastener, that helps to hold unthreaded shafts in place. Although small, this push cap helps to secure the wheel to the axle. Push caps are most commonly damaged if the operator uses their appliance in rough terrain. If damaged, it can fall off, causing the wheel to also fall off. Replacing push caps is an easy repair as they attach to the outside of the wheel assembly. The only hardware required to make this repair is a nut driver. If you do not have a nut driver, a pair of pliers can also be used to attach the new push cap. This part is a high-quality replacement part meant for Yard Man, Husky, Ryobi, Yard Machines, Troy-Bilt, MTD, Bolens, and Cub Cadet appliances. It is sourced direct from its original manufacturer and ships individually.