Need Help?
Call or text
Show parts
This upper handle can be used as a replacement part for a lawnmower or snowblower. The upper handle allows the user to control the movement of the equipment while it is in operation.If the part suffers damage from direct impact or wears down from use over time, it may need to be replaced. An upper handle can suffer damage in the form of piercing, cracks, scrapes, punctures, and corrosion of the metal material. If this damage makes steering the lawnmower or snowblower difficult, the handle should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This upper handle is a genuine MTD part, sold individually. It is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Machines, Huskee, Craftsman, Yard-Man, and Bolens.
This control handle is designed specifically as a replacement for use on select walk-behind lawn mowers. The control handle is the safety that is engaged to allow the engine to run. When holding the control handle in, the pull start can be activated and the engine will run. Once the control handle is released, the engine will stop. In the event that the control handle becomes damaged or fails, it will need to be replaced so that the mower can continue to be used. This handle can provide a genuine replacement for compatible models. This control handle is manufactured to exact standards by MTD and provides an exact fit. It is compatible with hundreds of models, including select models from RYOBI, Yard Machines, Troy-Bilt, Yard-Man, Husky, Bolens, and Cub Cadet. This part is also known as the control bar, control handle, engine stop handle, bail control, or mower bail. It is made of durable metal and sold individually. No tools are required for the installation of this part. To replace the handle, simply squeeze the existing control handle to remove it from the outer handle, and then align the new handle and slide it into place. When properly installed, the pressure will hold it in place and allow for proper operation.
This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.
A rope guide eyebolt is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers. It is compatible with products by brands such as Craftsman, Bolens, Husky, Yard Machines, Yard Man, MTD, and Troy-Bilt.The rope guide eyebolt part plays a valuable role in making the lawn mower easier to operate. The metal rope guide eyebolt is to be mounted to the side rail of the handle, which then keeps it secured with a handle knob. The rope guide eyebolt keeps the starter rope on the upper handle for ease of access. The purpose of all of this is simply to keep the rope out of the way while operating. The replacement or repair process of the rope guide eyebolt should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes.The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This part is made out of metal. This rope guide eyebolt is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.
This replacement curved hd. screw is also known as a carriage bolt. The screw can be used on many types of lawn and garden equipment. The purpose of the screw is to hold and support the upper and lower handles of the machine. It works along with the hand knob to help secure the handles, but buyers should know that the knob is sold separately. Owners might need to replace the carriage bolt if it has become corroded or no longer properly secures the handles. If the owner has lost the bolt, they will need to buy a new one before they can use their machine. The replacement for this part is fast and simple. This is an authentic OEM replacement curved hd. screw that is sold individually. It is for use with lawn mowers, tillers, snowblowers, wood chippers, edgers, and leaf blowers. It is compatible with certain models from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.
Usually ships within 4 - 14 days
A star knob connects the upper and lower handles on an outdoor appliance, and if removed, the upper and lower handles are quick-released. This part is made of black heavy-duty black plastic, and the threads are made of steel. Over time, the threading can become worn out, making the connection loose, and causing the two handles to no longer stay in place. Star knobs are a straightforward repair that can be done in a matter of minutes. Just unscrew the original, damaged knob and screw in the new knob. The knob is designed to be unscrewed by hand, so there is no need for additional tools to make this repair. This genuine OEM replacement part is designed for a variety of outdoor appliances, including lawnmowers, edgers, chippers, tractors, trimmers, and cultivators. This star knob is compatible with Yard Machines, Yard-Man, Cub Cadet, Bolens, Craftsmen, and Ryobi products. This part ships individually.
This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.
This is a grass catcher that attaches to the cutting deck of a number of walk behind lawn mowers. The bag fits over the metal bag frame, which is sold separately. The bag and frame are designed to detach easily from the mower so that grass clippings can be discarded quickly and the bag can be reattached. Although it is made of durable fabric, bags do become worn out. This is primarily a result of being dragged against grass, obstacles, fences, and other impediments. Once worn, the bags cannot be satisfactorily repaired and thus need to be replaced. Replacement is a simple matter of removing the fabric bag from the metal frame and slipping the new replacement bag back onto the frame. While making the replacement, it is a good idea to check the status of the metal frame, which can also become bent or even broken during normal use. When replacing this grass catcher bag, it is essential to avoid purchasing a generic, lower quality item. Instead, make sure to use a genuine OEM replacement part such as this one, which is manufactured to be identical to the original. This bag is compatible with mowers offered by Ryobi, MTD, Yard Man, Bolens, Yard Machine, Husky, Cub Cadet, and Troy-Bilt.
The cotter pin is a fastener that is commonly used in lawn and garden equipment. The cotter pin helps provide a secure, locking fit that is adjustable and easy to remove. The cotter pin is commonly used on axles and rods, but it can have many applications depending on the machine and model. Cotter pins can become worn or break down over time because they are exposed to constant vibrations. It is important to replace damaged or broken cotter pins immediately as a broken part can render the equipment useless in many cases. This cotter pin is designed to exact OEM standards by MTD, and is designed for use in various equipment from MTD, Troy-Bilt, Craftsman, RYOBI, Yard Machines, Hard Man, Poulan, Husky, Bolens, and Cub Cadet. This is a 5/16 cotter pin that features a #34 diameter, and is made of a durable metal. This part is sold individually and those who require more than one will have to order multiple quantities. No other hardware is included. Always wear gloves when working on lawn and garden equipment.
This part is a replacement trail shield wire. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty trail shield wire in a variety of lawnmower models.This part securely attaches the lawnmower's rear skirt to the back of the deck. This is what enables the rear skirt to easily move back and forth. If the trail shield wire is damaged, the rear skirt may stick or will not pivot properly, effecting equipment functionality. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. For more accurate information on how and where to install this trail shield wire, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this trail shield wire is suitable for use on several different models of lawnmowers manufactured by MTD, Troy-Bilt, Yard Man, Yard Machines, Cub Cadet, and Bolen. This is a genuine part made of high-quality, durable metal and is sold individually.
This part is discontinued by the manufacturer and is no longer available for purchase.
This replacement part is a torsion spring. This is a genuine replacement part made by MTD. Torsion springs ensure that the engine is able to work properly and effectively using the torque provided by this part. A new torsion spring might be needed if the current one is missing or damaged in any way. Springs can become brittle under pressure and snap after years of use. Be sure to replace this spring as soon as possible if this is the case. Work gloves are recommended as this part can be dangerous and cause injury if handled improperly. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This wheel assembly is an authentic OEM replacement part sourced directly from the manufacturer for use on lawnmowers. This is a complete wheel assembly. The rim and wheel are one complete unit. If the lawnmower wheel is damaged and needs to be replaced, the entire piece can be taken off the mower and this assembly installed. Wheels can be damaged due to stationary objects that the mower runs over during operation or simply due to normal wear and tear. If the lawnmower is shaky or unstable during operation, the wheels should be inspected to determine which wheel needs replaced. It is a good idea to have an extra wheel assembly on hand so that the lawnmower can be repaired quickly if a wheel is damaged during use. Make sure the lawnmower is parked on a flat surface and that the spark plug is removed before repairing the wheel. Remove the nut holding the wheel on the shaft and set the nut aside. Place the new wheel on the shaft and use the nut to secure it. This wheel assembly is sold as an individual unit. It is designed for use on lawnmowers manufactured by Craftsman and MTD.
This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.
This replacement part is a baffle. It is a genuine replacement part made by MTD. This part can be added to different types of lawnmowers and is used to enhance the airflow underneath the mowing deck. This helps the grass clippings and other debris move smoothly into the bag or discharge chute. A new baffle might be needed if the user notices that the grass and other debris is moving in the wrong direction as it is turning into mulch. This can be because the air underneath the deck is not moving properly and the grass is not being deposited in the correct place. Be sure to refer to the user manual for more detailed instructions on how to replace or install this part. This baffle is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part to ensure proper fit.
Carriage bolts are flat-tipped with round heads, and their function in small engine appliances is to fasten together components and to secure that connection with a nut. There are various reasons that a carriage bolt might have to be removed and replaced, among them misplacement of the small, easily lost part. Other reasons to replace a carriage bolt could include damage or erosion that prevents the bolt from attaching the materials to one another effectively. If a carriage bolt is subject to this kind of damage, it should be replaced before using the small engine appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This genuine MTD carriage bolt can be used as a replacement part for several different kinds of appliances that require small engines, including lawnmowers, snowblowers, wood-chippers, tillers, string trimmers, leaf blowers, and edgers. The OEM carriage bolt is compatible with the following brands: Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. This part is sold individually.
This durable metal screw is designed to be used on many types of lawn and garden equipment, such as lawnmowers and snowblowers. The screw can be used to attach different components together so they stay stable and connected to ensure the equipment works correctly. It can be used on a variety of materials including metal, plastic, bricks, and wood. If the screw needs to be replaced, a visual inspection will indicate that. Screws often become damaged over time or can even break. Some screws also become stripped and no longer do what they are intended for. A hex wrench can be used to remove this screw from the machine so the new one can be installed. After installing the replacement screw, it should be tightened to ensure the materials it brings together are kept flush.This screw is made for use with lawnmowers, snowblowers, chipper shredders, and lawn tractors manufactured by MTD, Yard Machines, Yard-Man, and Troy-Bilt. It is sold as an individual part. This is an authentic OEM replacement part that is sourced directly from the manufacturer. A hex wrench may be needed for the replacement.
This replacement part is a hex screw. This is a genuine replacement part made by MTD. This type of screw is commonly found in many types of machinery and appliances. Screws are able to keep certain parts stable and connected so that they are secure during use. A new hex screw might be needed if the current one is visibly damaged in any way or missing. It is not uncommon for screws to become stripped down or lodged in place after years of normal use. If this is the case they should be replaced as soon as possible. If the screw is lodged in place, pliers might be required on top of a screwdriver to complete this repair. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.
This replacement part is an arm assembly, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This part is typically found in lawn mowers that uses handles to steer and turn. This arm assembly is what allows the user to control the appliance and use it properly while cutting lawns. A new arm assembly might be needed if the user notices that the current arm or handle area is broken or damaged in anyway. It is possible for the arm assembly to become worn down overtime including being stripped of the color or coating. The user might want to replace the arm assembly simply for looks. Be sure to wear work gloves during this replacement as the old arm might be sharp or rigid. This arm assembly is sold individually. This replacement part is a genuine OEM part sourced directly from the manufacturer
This genuine MTD foam grip provides a firmer grip for one's hands while holding onto the handles or the bar of a lawnmower; the foam grip insulates one's hands from the vibration and shaking of a lawnmower while in use.The foam grip of a lawnmower can be subject to damage in the form of chips, nicks, cuts, tears, rips, or punctures. This damage can be the result of overuse, age, exposure to the elements, or general wear and tear easily attributable to regular long-term usage. If this damage occurs, the foam grips should be replaced as soon as possible to continue to provide insulation from the vibration of the equipment while in use. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This OEM foam grip is compatible with the following brands: MTD, Troy-Bilt, Yard-Man, and Bolens. This part is sold individually.
The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.
The blade support is found between the blade and the bolt. As its name suggests, it is designed to provide support for the blade to ensure it is secured to the base of the mower deck. It is made of metal and it will need a replacement if it becomes worn or damaged. To replace a blade support or blade spacer, first, the engine needs to be cool. Remove the wire and boot from the spark plug. Tip the mower back on its handle assembly and use a piece of wood or sturdy object to hold the cutting blade in place. Remove the old blade support and blade. When installing the new one, ensure that the blade's sharp edge faces away from the mower deck. Re-thread and torque the bolt between 40 and 50 ft-lbs. This is an original OEM replacement part for lawnmower blade support made by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, MasterCut. It is sold individually.
This replacement part is a hex bolt. It is a genuine replacement part made by MTD. Hex bolts are named because they are shaped like a hexagon and are different from the regular circle-shaped bolts. These parts are able to hold other parts secure and in place so that everything can operate as needed. A new hex bolt might be needed if the current ones are damaged in any way. It is possible that these bolts become stripped or lodged in place over time due to normal wear and tear and should be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous part is stuck. Be sure the engine is completely powered down before beginning this repair. This bolt is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.
This is a height adjuster knob for walk-behind lawn mowers. It attaches to the height adjuster lever. This component is used to adjust the front wheels on the lawnmower deck. This adjustment allows the user to select the desired cutting height of the grass. This component is made out of a hardened foam material that is easy to grip.If the height adjuster knob falls off of the height adjust lever and will not reattach, it is likely that it will need to be replaced. The height adjuster lever itself is sold separately. The repair person may wish to wear gloves when replacing this part.This component is sourced straight from the manufacturer. It is sold individually and is a genuine OEM part. This height adjuster knob is compatible with walk-behind lawnmowers that are manufactured by the Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Craftsman, and Husky brands.
The Lever Knob Assembly is an OEM replacement part for MTD outdoor power equipment. The Lever Knob Assembly is responsible for adjusting the height of the mower blade on the front wheel of the mower.
Over time, the plastic or metal components can degrade due to exposure to the elements, frequent use, or accidental impacts. This can lead to the knob becoming difficult to turn, slipping out of place, or breaking entirely.
Symptoms of a bad lever knob assembly include:
This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring versatility and reliability for your outdoor power equipment.
This hub cap is for use with select walk-behind mower models. The hubcap serves the same purpose as those found on automobiles. They serve to protect the wheel and to reduce the amount of dirt, debris, and moisture that collects on the wheel hub. The hub caps are simple parts, but if they are missing or damaged, the owner will want to replace them.The hub caps are made from durable plastic. They can handle the regular use that a mower sees without trouble, but they could still become damaged. They might become loose and need to be replaced, as well. Removing the old hub caps and adding new ones is a fast and simple repair.These hub caps will work with certain mower models from MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Husky. The hub caps are sold individually. Owners may need to buy more than one. This is a genuine OEM replacement part sourced from the manufacturer.
A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.
This baffle is a genuine MTD part. It is made for use with walk-behind and self-propelled lawnmowers. It is a rear mulching baffle, which means that it aids in mulching lawn clippings, cutting them down into very small pieces. These clippings can either be disposed of, composted, or used as fertilizer.This mulching baffle is a genuine OEM part sourced directly from the manufacturer and is sold individually. Most mowers have more than one baffle, so be sure to check if others also need to be replaced.This baffle is manufactured for compatibility with lawnmowers made by Bolens, Columbia, MTD Pro, White Outdoor, Yard Machines, and Yard-Man. Some of these models are electric mowers, while others are gas-powered. It is also compatible with some stand-alone mulching kits. Use the compatibility checker before purchasing.