Parts for Mtd Pro 41ADH70G995: General Assembly Parts

This is a throttle trigger assembly for a string trimmer. This part is used to engage the throttle cable, which opens the carburetor to add more of a mix of fuel and air into the combustion chamber. A new throttle trigger assembly will be needed if it is damaged in a way that prevents it from operating correctly. It could be broken by physical impact or could wear out with normal extended use. If the throttle trigger is not effectively actuating the throttle cable, it will need to be replaced. Allow the trimmer plenty of time to cool down before attempting to perform any care or maintenance on the machine.This throttle trigger is made to be used with string trimmers. It's an OEM part sourced directly from the manufacturer and it is sold individually. This part is used on MTD, Craftsman, Yard Machines, McCulloch, Remington, White Outdoor, and Troy-Bilt brands.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This is an anti-rotation screw. The lower handle clip on many devices, including lawn and garden equipment and tools, holds an anti-rotation screw. With use, over time, or because of other damages, the screw may be broken or stripped. When this occurs, a replacement anti-rotation screw is required to keep the machine secured together correctly for safe use.The replacement of an anti-rotation screw is quick and easy. A Torx screwdriver is recommended for replacing the part. Allow the machine to cool completely before working with it. Wear protective gloves for safety always. Remove a stripped or worn out screw if there is one present before securing in the new part to the lower handle clip.This anti-rotation screw is a genuine OEM part. It is sourced from the manufacturer. The replacement part is sold as an individual unit. The piece is made from high-quality, durable metal. It can be used in a variety of brands, including Ryobi, Troy-Bilt, MTD, Bolens, Yard-Man, Yard Machines, and Cub Cadet. The anti-rotation screw is compatible with many models of blowers, cultivators, edgers, snowblowers, trimmers, vacuums, and other tools and lawn and garden equipment.

This part is a replacement blade driver. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken blade driver in line trimmers.Blade drivers help to ensure the line trimmer blade rotates on the gearbox shaft and so is an essential component and should be replaced if faulty. This part may become corroded, worn, jammed, or otherwise damaged over time, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular blade driver, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This blade driver can be used with a variety of line trimmer models manufactured by Craftsman, MTD, Troy-Bilt, and other brands.

This replacement part is a palnut. This is a genuine replacement part made by MTD. Palnuts are small but important to the overall workings of appliances. These parts work with other small pieces like screws and washers to ensure that the machine is able to work properly during use. A new palnut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or from a single incident that may have caused damage. It is normal for this part to endure large amounts of friction over time, and so it can become worn down with extended use. This palnut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer. "

This bump head assembly is a genuine MTD part, sold individually. This bump head assembly can be used as a replacement part in a string trimmer. The purpose of the bump head assembly is to release the string, or the line, of the string trimmer in order to cut through greenery while in use by the operator.The bump head assembly in a string trimmer might have to be replaced if it can no longer properly unspool and dispense line. The bump head assembly could be punctured, dented, cracked, warped, eroded, or damaged in some other form.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This bump head assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

A shoulder strap is a strap made to be attached to machinery in order to make the use of the machine easier, less awkward, and more comfortable for the user. It designed for use with outdoor lawn and garden equipment such as string trimmers, leaf blowers, and pole pruners. Fortunately, if a shoulder strap breaks, it will be very obvious and is easily fixed. Signs of a faulty shoulder strap include frayed edges, worn or thin fabric, or faulty attaching mechanisms holding the strap to the machine. The replacement or repair process is incredibly simple, as it requires no technical savvy or internal part replacement. Everything requiring replacement is visible from the outside of the machine.This shoulder strap is also sometimes referred to simply as a backpack harness assembly strap. The purchase of the shoulder strap does include any necessary mounting hardware needed to attach it to outdoor equipment. The shoulder strap is built to last and create a more pleasant experience while using a blower, vacuum, or pruner.This shoulder strap is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. In most cases, since each strap is sold separately, if the user prefers to attach the shoulder straps in a way that resembles a backpack or harness instead of just a single shoulder strap, the purchase of two separate shoulder straps will be necessary. This particular backpack harness assembly strap is compatible for use with machines made by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.