Parts for Oem-Attachments 19A30017OEM: General Assembly Parts

This replacement part is a shoe skid. It is a genuine replacement part made by MTD. Shoe skids are often found in snow blowers to allow the appliance to clear the ground when in use. This helps the user perform the necessary actions to rid the area of snow and other debris. A new shoe skid might be needed if the user hits the ground with the appliance as they are clearing snow. This can be because the part is damaged or missing. This should be a fairly easy repair and only require a screwdriver and some other common household tools. Be sure to refer to the owner's manual before replacing this part. This part is a genuine OEM replacement part to ensure long-lasting use and proper fit. This shoe skid is sold individually and is sourced directly from the manufacturer.

This lift link is a genuine MTD part, sold individually. This lift link can be used as a replacement part in a lawn tractor with a snow blade attachment. The purpose of the lift link in a lawn tractor with a snow blade attachment is to affix to the lift handle rod and to the pivot support bracket such that the elevation of the snow blade can be customized to the desired height of the operator.The lift link in a lawn tractor with a snow blade attachment might need to be replaced if the lift link ceases to be able to control and allow the operator to regulate the desired height of the snow blade. This could occur if the lift link has been punctured, dented, cracked, warped, eroded, or otherwise damaged.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This lift link is compatible with the following outdoor appliance brands: MTD and Craftsman.

This replacement part is a hex screw. This is a genuine replacement part made by MTD. This type of screw is commonly found in many types of machinery and appliances. Screws are able to keep certain parts stable and connected so that they are secure during use. A new hex screw might be needed if the current one is visibly damaged in any way or missing. It is not uncommon for screws to become stripped down or lodged in place after years of normal use. If this is the case they should be replaced as soon as possible. If the screw is lodged in place, pliers might be required on top of a screwdriver to complete this repair. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

Shoulder screws are a type of fastener used in many types of lawn and garden equipment. Also called stripper bolts or shoulder bolts, they have a head, threads, and an unthreaded shoulder. These screws are used in areas where items need to be held together in a specific location. They can be used with bearings, bushings, and machinery support. Shoulder screws are made of durable metal but can still experience breakage or damage. When this occurs, the screws will need to be replaced. A wrench can be used to remove the damaged shoulder screw. First, visually inspect the shoulder screw to look for damage or corrosion. Sometimes, the screw will be entirely broken. If any of these things are present, a wrench can be used to remove the old shoulder screw. The same tool can be used to insert a new shoulder screw before reassembling the equipment.Designed for lawnmowers, lawn tractors, tillers, leaf blowers, chainsaws, log splitters, chipper shredders, and snowblowers, this part is compatible with items from Yard Machines, MTD, Cub Cadet, Craftsman, Toro, Huskee, Montgomery Wards, Yard-Man, MasterCut, and Troy-Bilt. The locknut is sold separately.

This part is a replacement flange nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced flange nut on a variety of small engine outdoor power equipment, although this particular nut is primarily intended for use with lawnmowers. The flange nut is named for its single wide end, referred to as a flange. This enables the nut to act as an integrated washer, which helps to provide a better fastening surface and hold parts in place more efficiently. Flange nuts can become corroded or lost and thus may require replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this flange nut, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this flange nut is suitable for use on several models of lawnmowers and other small-engine outdoor power equipment manufactured by MTD, Troy-Bilt, Craftsman, and Cub Cadet. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a service kit. It is a genuine replacement part made by MTD. This part is usually used for repairing or replacing certain things in a snow blower. A new service kit might be needed if the user does not have one to start with, or the parts are old or damaged. It is recommended that the user has the kit handle to be able to utilize the parts when needed. Be sure to wear work gloves when replacing any part of a snowblower and it is also recommended that the engine is completely powered down prior to starting a repair. This service kit is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part.