Parts for Yard Machines 24AA5DMK000 / 2007: General Assembly Parts

Replacement screw for lawn mowers and outdoor power equipment. Secures components together for proper operation. Order if original is stripped or missing.

This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.

The shoulder screw is used in places where a spacer or bearing surface is needed, since the top half of the screw is unthreaded. These fasteners are often used for guides, pivot points, mounting pins, axles, and even a shaft for bearings and bushings in various MTD engines. With regular use, the screws can wear down or be lost. Always repair the missing hardware promptly with genuine OEM replacements. Disengage the spark plug and wear gloves when performing work on engines for safety. This genuine OEM replacement shoulder screw has been designed to be compatible with machines from MTD, Troy-Bilt, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Craftsman. It can be used for multiple applications and in multiple locations in different models of lawnmowers, tractors, and chippers that use the screw in various applications. Check your parts diagrams for the exact location and use of these screws before ordering. This is sold as an individual unit; order multiple quantities as needed.

Hex screw for lawn tractors and garden equipment. Replaces missing, loose, or deteriorated fasteners in various mounting applications across the machine.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

V-type transmission belt transfers engine power to log splitter components. Replace if cracked, frayed, or slipping. Verify fit with your model number.

Hydraulic tank assembly for log splitters. Replaces cracked, damaged, or leaking original tank. Mounts to splitter frame to hold hydraulic fluid.

Mower won't start even with brake engaged? A faulty interlock switch blocks current to the starter. This safety switch replacement restores starting function.

Ratchet fastener for lawn mowers and tractors. Secures components in place. Replace if broken, stripped, or missing to properly fasten parts together.

Return spring for tillers. Installs on the control mechanism to provide tension and automatic return action. Replace if stretched, broken, or missing.

Clevis pin for log splitter linkage connections. Replace if bent, worn, or missing to secure hydraulic cylinder and beam assembly connections.

This valve handle link is a replacement for the three metal components connected to the control valve handle on a log splitter. The control valve handle of a log splitter is designed to have three settings: forward, neutral, and reverse. When the handle is engaged forward, a ram is pushed out and splits a log that has been placed in the machine. The handle is then moved into the reverse positions to move the ram back to the start position. While loading a new log into the splitter, the handle should be in the neutral setting. If a control valve handle becomes worn or damaged, the log splitter may not shift entirely into the desired operating position. Warning signs of wear and damage can include a loose or wobbly control valve handle or a feeling of slipping when shifting handle positions. The malfunctioning handle may be due to the valve handle link becoming damaged. This valve handle link replacement is sold individually and is an OEM part that is sourced directly from the manufacturer. It fits an MTD, Troy-Bilt, Yard Machines, Cub Cadet, Bolens, or Craftsman log splitter.

The cotter pin is a fastener that is commonly used in lawn and garden equipment. The cotter pin helps provide a secure, locking fit that is adjustable and easy to remove. The cotter pin is commonly used on axles and rods, but it can have many applications depending on the machine and model. Cotter pins can become worn or break down over time because they are exposed to constant vibrations. It is important to replace damaged or broken cotter pins immediately as a broken part can render the equipment useless in many cases. This cotter pin is designed to exact OEM standards by MTD, and is designed for use in various equipment from MTD, Troy-Bilt, Craftsman, RYOBI, Yard Machines, Hard Man, Poulan, Husky, Bolens, and Cub Cadet. This is a 5/16 cotter pin that features a #34 diameter, and is made of a durable metal. This part is sold individually and those who require more than one will have to order multiple quantities. No other hardware is included. Always wear gloves when working on lawn and garden equipment.

Replacement handle grip for log splitters and outdoor power equipment. Covers the handle surface for improved comfort and control. Replace when cracked or worn.

Control handle for log splitters. Replaces broken, cracked, or worn handles. Mounts to control mechanism for operating the splitting ram.

Replacement hex screw for lawn tractors and log splitters. Secures components by working with washers or bolts. Order a new screw if worn or missing.

Pivot rod for log splitter beam assembly. Replace if bent, damaged, or worn from use. Essential structural component for proper splitting operation.

This genuine OEM replacement part is a push cap designed for snowblower, tiller, and edger wheel assemblies. A push cap is a special type of nut, or fastener, that helps to hold unthreaded shafts in place. Although small, this push cap helps to secure the wheel to the axle. Push caps are most commonly damaged if the operator uses their appliance in rough terrain. If damaged, it can fall off, causing the wheel to also fall off. Replacing push caps is an easy repair as they attach to the outside of the wheel assembly. The only hardware required to make this repair is a nut driver. If you do not have a nut driver, a pair of pliers can also be used to attach the new push cap. This part is a high-quality replacement part meant for Yard Man, Husky, Ryobi, Yard Machines, Troy-Bilt, MTD, Bolens, and Cub Cadet appliances. It is sourced direct from its original manufacturer and ships individually.

Hex cap screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if stripped, rusted, or missing hardware.

Log splitter not building pressure or splitting slowly? The gear pump powers hydraulic pressure for splitting. Moderate difficulty replacement part.

Replacement wheel assembly for walk-behind mowers and lawn equipment. Installs on axle to restore mobility. Order when wheel is cracked, broken, or worn.

Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.

Fix sluggish or inconsistent splitting action with this log splitter control valve. Regulates hydraulic cylinder movement for smooth operation.