Parts for Yard Machines 24BD522F062 / 1999: General Assembly Parts

This hex bolt is a genuine MTD part, sold individually. This hex bolt can be used as a replacement part in lawn mowers, edgers, log splitters, and wood chippers. The purpose of the hex bolt for these outdoor appliances is to serve as a fastening component in conjunction with a nut so that one or more components can be held together with the aid of this fastener.The hex bolt in an outdoor appliance might need to be replaced if it is lost, misplaced, or stripped. If the hex bolt is lost or misplaced, it should be replaced by this genuine OEM replacement part. If the hex bolt suffers damage in the form of scraping, denting, cracking, or eroding over time, the component should be replaced immediately.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Yard Machines, Huskee, Yard Man, and MasterCut.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

This replacement part is a back plate pusher, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Back plate pushers are part of many log splitters and help in the pushing mechanism while the device is cutting logs. This part is important as the plate pusher is the main device that pushes logs to be split during use. A new back plate pusher might be needed if the current one is dented or broken. If this is the case, the device might struggle with holding the logs steady and can affect the integrity of the machine altogether. It is recommended that the back plate pusher be replaced so that logs are able to be split correctly and efficiently. Always use work gloves while repairing parts on log splitters. This is a genuine OEM replacement part and is told individually. Reference the appropriate user guide for more specific instructions on how to replace this part. This part is sourced directly from the manufacturer.

This part is a replacement floating gib plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or defective floating gib plate in a variety of different log splitter models.The floating gib plate works to support the wedge assembly and keep it in good alignment. This part can become worn or broken over time and will require replacement to keep the equipment functioning properly. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this floating gib plate, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this floating gib plate is suitable for use on several different models of lawnmowers manufactured by MTD. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement stripper half. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken, detached or malfunctioning stripper half in a variety of different log splitter models.The stripper helps to remove a partially split log if it gets stuck within the wedge assembly. This enables the log splitter to remain clear and unclogged of debris and keeps it functioning properly. This part is subject to wear and tear and may require replacement within the lifespan of the equipment. Wear work gloves to protect the hands when replacing equipment parts. Additionally, when working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this stripper half, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this stripper half is suitable for use on several different models of log splitters manufactured by MTD. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a hydraulic tube. It is a genuine replacement part made by MTD. This tube is typically found in appliances such as log splitters. The tube allows for movement between two different parts as well as reduces vibration and movement while powered on. This is very important while log splitting as it can be dangerous if the appliance moves too much during use. A new hydraulic tube might be needed if the appliance is very shaky or moving too much during use. This can mean that the tube itself is damaged or even missing. Be sure the appliance is powered down before attempting to replace this tube as parts of it are close to the engine. This hydraulic tube is sourced directly from the manufacturer and is a genuine OEM replacement part to ensure a proper fit. This tube is sold individually.

This part is a replacement return hose. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached return hose in a variety of outdoor power equipment. The return hose returns any excess fuel from the carburetor back into the fuel pump. Over time, this part can become worn or may be punctured, which can cause fuel leaks. In this case, it should be replaced immediately before the equipment is used again. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this return hose, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this return hose is suitable for use on several different models of chippers, shredders, and log splitters manufactured by MTD, Troy-Bilt, Yard Man, Cub Cadet, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

This is an oil filter designed for use in larger gasoline-powered landscaping and outdoor equipment such as log splitters and chippers. An oil filter is an essential safeguard to maintain a good operating condition and ensure long life in a gas engine. Oil filters remove toxic chemicals as small pieces of debris that can end up in the engines. Because these contaminants, if improperly removed, could also end up in the air or in the environment in other ways, oil filters must be meet EPA emission regulations. This filter not only meets federal environmental standards but also is an OEM guaranteed replacement part that is manufactured to the identical specification of the original parts being replaced. By the very nature of what it's supposed to accomplish, eventually, the filter will need to be replaced. Over time the filter's elements will become full of debris, and failing to replace it in a timely manner runs the risk of allowing the captured pollutants to escape back into the engine oil. When replacing the old filter, make sure to follow environmental guidelines as well, disposing of the oil and filter according to posted regulations. Replacing the filter is the ideal time to replace the engine oil as well. This filter is compatible with Husky, Cub Cadet, Troy-Bilt, Yard-Man, and MTD equipment.

This replacement part is a hydraulic hose, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Hydraulic hoses are an important part to many lawn mowers. Typically these hoses transport fluids between two different ports within the appliance. This allows the engine to run smoothly and efficiently. A new hydraulic hose might be needed if the lawn mower system is not working at all. It is common that the hose needs replacing about every year or two. Because this part is heavily used during lawn mowing, it is not uncommon for it to need to be replaced. Be sure the engine is completely powered off before starting the repair. Note that there may be fluid inside the hose when removed. This hydraulic hose is a genuine OEM part and is sold individually. Refer to the specific owner's manual for more detailed instructions on how to replace this part.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.

This locking rod is a genuine MTD part, sold individually. This locking rod can be used as a replacement part in a log splitter. The purpose of a locking rod in a log splitter is to serve as a fastening component that holds one or more parts together.The locking rod in a log splitter might need to be replaced with this genuine OEM replacement part at some point within the typical lifespan of the appliance. This could occur if the locking rod is damaged in the form of puncturing, scraping, denting, cracking, eroding, or warping. If this occurs, the locking rod should be immediately replaced in accordance with the proper set of instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This locking rod is compatible with the following outdoor appliance brands: MTD, Yard Man, Ryobi, Cub Cadet, Craftsman, and Yard Machines.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

This part is a replacement deflector. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective deflector in lawn tractors.The deflector ensures the user is safe from flying or expelled debris while using the lawn tractor. This part should be in good working order at all times and should be replaced if broken, detached, or ineffective in any way. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this deflector, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This deflector can be used with different models of lawn tractors that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This locking rod is a genuine MTD part, sold individually. This locking rod can be used as a replacement part in a log splitter. The purpose of a locking rod in a log splitter is to serve as a fastening component that holds one or more parts together.The locking rod in a log splitter might need to be replaced with this genuine OEM replacement part at some point within the typical lifespan of the appliance. This could occur if the locking rod is damaged in the form of puncturing, scraping, denting, cracking, eroding, or warping. If this occurs, the locking rod should be immediately replaced in accordance with the proper set of instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This locking rod is compatible with the following outdoor appliance brands: MTD, Yard Man, Ryobi, Cub Cadet, Craftsman, and Yard Machines.

This flat washer is used to attach the idler pulley in a number of small and medium sized gasoline powered engines. These engines include snow blowers, log splitters, riding mowers, lawn tractors, and chippers. Because the idler pulley is subject to a great deal of resistance when the pulley is engaged, eventually the pulley will wear out. Should there be a squealing sound when engaging the drive, the problem is likely the idler pulley. In these cases, the pulley must be replaced. It is a good idea to replace the surrounding hardware when replacing the idler pulley; tNhis includes the flat washer, which is subject to corrosion during heavy use. To replace the idler pulley, first detach the spark plug cap. If on a mower or tractor, drop the mower deck. Remove the original pulley and install in order: replacement pulley, hex bolt, flat washer, flange nut. Apart from dropping the mower deck, the only tools required to complete this installation may be a 9/16 ratchet and combination wrench. This washer is a genuine OEM replacement part, designed to perfectly replicate the original piece. This washer is compatible with Troy-Bilt, Yard Man, Yard Machines, MTD, and Craftsman devices.

This part is a replacement jack stand. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or malfunctioning jack stand in a variety of different log splitter models.The jack stand is what enables the log splitter to be easily raised, steadied, or leveled out when stationary and ready to be used. If the jack stand becomes dented or broken in any way, the equipment may not be sufficiently stabilized and may not be able to be used safely. Always wear work gloves to protect the hands when replacing equipment parts. Additionally, when working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this jack stand, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this jack stand is suitable for use on several different models of log splitters manufactured by MTD, Cub Cadet, and Troy-Bilt. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a wheel intended for use in lawn equipment. This is a genuine replacement part made by MTD. Wheels allow the user to move the machine with ease and precision. Many different appliances are made to be easily transported and moved around on wheels. A new wheel might be needed if the current ones are worn down or broken in any way. It is not unusual for this part to require replacement after years of normal use as the wheels might lose traction overtime. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is suggested that the user refer to the reference guide for directions on how to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This nut, or slotted nut, is a genuine MTD part. It is a replacement part for use on lawn mowers, log splitters, wood chippers, lawn tractors, and chipper shredders. It is hexagonal in shape.The uses for this nut vary greatly depending on the machine with which owners plan to use it. Generally speaking, nuts work to secure various parts of components together. Loosening and tightening most nuts can be accomplished with a wrench. Before making any repairs, be sure that the engine has completely cooled, empty the fuel tank to avoid spillage, and disconnect the spark plug or battery. Wear work gloves and other protective gear.This nut is a genuine OEM part sourced directly from the manufacturer. It is sold individually; very often, more than one nut is used on machines such as these, so be sure to check how many are needed. It is designed for compatibility with various machines made by Agway Craftsman, Cub Cadet, Duerr, MTD, Lawn Chief, OEM, Ranch King, Remington, Ryobi, White Outdoor, Yard Machines, and Yard-Man.

A cotter pin is a standard piece of hardware typically used on lawn and garden equipment as a method of securing something to an axle or round shaft. These pins are thin and, although they are durable, they can rust or become damaged over time. In some instances, they can break off or become lost in the process of other repairs. A replacement with the right size and style of cotter pin will ensure that equipment is in working order at all times. This genuine OEM cotter pin replacement can be used with select lawn and garden equipment from MTD, Huskee, Yard Man, Yard Machines, Troy-Bilt, Bolens, Cub Cadet, and Murray. It can be used on lawn tractors, log splitters, chipper/shredder units, and snowblowers. There are more than 150 compatible units, so owners should consult their parts diagram for application(s) of this pin. Note that this pin may have multiple applications on a single machine. This cotter pin is sold individually and may require needle nose pliers to replace.

This hubcap is an authentic OEM replacement part sourced directly from the manufacturer for use on log splitter and chipper wheels. The hubcap covers the central opening of the wheel assembly. This prevents dirt and debris from getting into the wheel assembly. If the hubcap comes off during use or is lost when replacing tires, a new one should be installed. The machine will work without a hubcap; however, the interior wheel assembly will be open to flying debris and could be damaged if rocks or large limbs go into the wheel assembly. During routine inspection and maintenance, the hub caps should be checked for damage and to make sure they are in place.The hubcap is easily removed and replaced with a screwdriver needed to pry the old hubcap off if it is still on the machine. The new hubcap simply snaps into place. This hubcap is made of high-quality metal and is sold individually. This hubcap is designed to be used with log splitters and chippers manufactured by MTD, Cub Cadet, Troy Bilt, Husky, and Yard-Man.