Parts for Speed Queen AFN50FSP111TW01: Graphic Panel / Control Support Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This right-hand white panel end replaces a damaged or worn side cap to restore the washer's appearance and keep the cabinet edge protected. It fits the machine's front panel area and matches factory styling. What it does:

• Covers and protects the right-hand side edge of the front cabinet or console
• Restores the unit's finished appearance after damage, scratches, or missing trim
• Helps prevent exposure of internal edges and wiring along the cabinet side
• Matches factory color and mounting locations for a clean replacement

• Remove power and disconnect the appliance before beginning any repair.
• Minor disassembly of the front panel or console may be required to access mounting tabs.
• Handle edges carefully to avoid cutting yourself or scratching the finish.
• Replace missing or damaged fasteners with matching hardware for secure fit.

This genuine OEM replacement part is a washer control board for commercial Speed Queen Washers. The control board is the main computer of a washer and controls the washing machine's essential functions. If the washer is no longer turning on, spinning, rinsing, or draining properly, it could mean that it needs to be replaced. Luckily replacing a control board is generally an easy repair.Start by unplugging the washer and pulling it out from the wall. Remove the upper back panel to gain access to the control board. Release the locking tabs that hold the control board in place and remove the wire harness along with any individual wires attached to the old board. Make sure to take note of the orientation of the wires by taking a picture with a phone camera. Reconnect the wire harness and individual wires into their correct terminals on the new board and snap it back in place. reinstall the upper back panel and put the washer back in place.This replacement part is sold individually and is compatible with Speed Queen Commercial washing machines.

This panel graphics overlay replaces worn or faded control labeling on the appliance's control panel, restoring clear button labels and listings for easier operation and a refreshed appearance. What it does:

• Restores legible markings for cycle selections, temperatures, and function buttons
• Improves usability when original graphics are faded, scratched, or peeling
• Refreshes the control panel's appearance for a cleaner, like-new look
• Helps avoid mis-pressing controls caused by illegible labels

• Disconnect power (and water if applicable) before beginning any work
• Remove control console fasteners carefully to access the old graphics; follow OEM service instructions
• Replace the overlay gently to avoid creases; avoid using sharp tools that can damage the panel
• Ensure the surface is clean and dry before applying the new overlay

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement knob assembly with skirt restores a secure, easy-to-turn control interface on the appliance. It provides a finished look while allowing reliable selection of settings. What it does:

• Replaces a cracked, stripped, or missing control knob to restore user control
• Provides a stable grip and tactile feedback when turning settings
• Helps prevent accidental slips or selector misalignment caused by worn knobs
• Matches the original mounting style for a direct-fit replacement

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the old knob by pulling straight off the control shaft; install the new knob by aligning and pushing fully onto the shaft
• If the original used a retaining clip or set screw, verify and reinstall it; only use parts explicitly included

This timer knob assembly is the replacement control knob that lets you set and adjust cycle time on the dryer/washing machine control. It restores a secure grip and clear cycle selection so you can operate the machine easily. What it does:

• Provides a firm, easy-to-turn control for selecting timer settings and cycles
• Replaces cracked, stripped, or missing knobs that are hard to turn or won't stay set
• Helps ensure the timer/control shaft is engaged for accurate cycle selection
• Matches OEM fit and function for a direct replacement when the knob is worn or damaged

• Disconnect power to the appliance before attempting replacement
• Knob typically pulls straight off the control shaft; align splines and press on until seated
• If a retaining clip or screw is present, remove and reinstall as needed—retain hardware
• Do not force the knob; confirm proper alignment to avoid damaging the control shaft

A replacement clear lens that covers and protects a panel indicator light, restoring a clean appearance and clear visibility of status LEDs. Fits behind the appliance control panel to shield the lamp from dirt and damage. What it does:

• Protects the indicator lamp from dust, moisture, and impact while maintaining light visibility
• Restores a cracked, cloudy, scratched, or missing indicator cover so status lights are easier to read
• Helps maintain the original look of the control panel and prevents direct contact with the lamp
• Simple cosmetic/functional replacement — does not include the lamp or electrical components

• One indicator light lens (single replacement piece)

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Access the control panel per your model's service instructions; you may need to remove trim or bezels
• Install the lens carefully to avoid cracking; ensure it seats into the panel clips or housing

This momentary push-to-start switch sends the start command to the washer's control when pressed, restoring reliable Start-button response. It's the common replacement for a worn or unresponsive start control in affected machines. What it does:

• Provides a momentary contact to signal the control board to begin a cycle.
• Replaces a faulty start button that's unresponsive, requires multiple presses, or fails intermittently.
• Installs in the machine console and connects to the existing switch connector.
• Works with factory control circuits to deliver a simple, tactile Start command.

• Disconnect power to the appliance before beginning any repair.
• Access the switch through the console or control panel.
• Handle wiring connectors gently and ensure secure, correct connections before restoring power.
• After installation, run a test cycle to ensure proper Start-button operation.

This is a control knob for washing machines. This control knob is used to adjust the water temperature and level settings on the unit. It is manufactured out of a white plastic. The replacement is very easy and takes less than 15 minutes to complete. All that this process involves is pulling the old knob off and sliding the new knob on.A new control knob will be needed if the original is cracked, broken, or damaged in any way. Over time, the white plastic may begin to yellow, and the user may wish to replace the control knob for cosmetic purposes. If the knob is not actuating the desired cycle, it will need to be replaced.This control knob is a genuine SpeedQueen part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific control knob is compatible with washing machines that are manufactured by the SpeedQueen brand.

This left-side white panel end replaces a damaged or worn corner trim on the control console or front fascia to restore appearance and protect edges. Designed to match original fit and finish on compatible Speed Queen units. What it does:

• Covers and protects the left edge of the console/front panel from bumps, wear, and moisture.
• Restores a clean, finished look when the original panel end is cracked, chipped, or missing.
• Helps maintain proper alignment and support for adjacent trim and fasteners.
• Fits in place of the factory left-side panel end for straightforward cosmetic repair.

• Designed for direct replacement; reinstall using original screws/clips when present.
• Inspect adjacent trim and fasteners; replace any damaged clips to ensure secure fit.
• Power down and unplug the appliance before attempting any repairs that require panel removal.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.