Parts for White Outdoor 032 / 2006: Handle Assembly Parts

Cable guide for snowblowers. Keeps control cables properly routed and secured. Replace if cracked, broken, or missing to maintain smooth cable operation.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Metal carriage bolt that fastens components together on lawn mowers, snow blowers, and garden equipment. Replace if bent, rusted, or missing.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

Rubber grommet for snow blower assembly. Fits through mounting holes to protect wires and cables. Replace if cracked, torn, or missing.

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

If your snow thrower's controls feel loose or unresponsive, this joint assembly links components and transfers motion. Moderate difficulty repair part.

If your snowblower chute won't rotate or move smoothly, the control cable may be frayed or broken. This cable connects the chute control to the directional mechanism.

Chute crank knob for snow throwers. Installs on the chute rotation control. Replace if cracked, broken, or missing to restore manual chute adjustment.

This part is a replacement push nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached push nut in snow blowers.Push nuts are a special type of fastener that secures together different equipment components. Push nuts will need to be replaced if worn, broken, lost, or otherwise ineffective. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this push nut, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This push nut can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

Metal clevis pin secures parts on lawn tractors and riding mowers. Replace if bent, worn, or missing to restore proper attachment and connection.

Replacement hex nut for lawn mowers, snowblowers, and outdoor power equipment. Used as a fastening component throughout the machine. Replace if missing.

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

Fastener pin that secures nuts and bolts in lawn mower engines and assemblies. Replace if bent, missing, or damaged during maintenance or repair work.

Flat washer for lawn mowers and outdoor power equipment. Installs between fasteners and components. Replace if worn, damaged, or missing during repairs.

Flat washer for lawn mowers and outdoor power equipment. Replaces worn, missing, or damaged washers during maintenance and repair. Essential hardware part.

This is a bell-shaped washer used on lawn tractors to distribute load and provide a secure fit for bolts or fasteners. Its curved design helps maintain tension and prevents loosening due to vibration during mowing. Replace this washer if it is deformed, cracked, or missing, which can lead to loose hardware and component instability.

Flange bearing for snowblower auger and drive systems. Replace if you notice grinding noise, wobbling parts, or difficulty engaging auger. Confirm fit.

Replacement hex head self-tapping screw for lawn mowers and outdoor power equipment. Secures panels, covers, and components. Order if missing or stripped.

This hex bolt is a necessary component used in a variety of small to medium sized gasoline powered engines used primarily in yard work, gardening, and landscaping. The primary use of this hex bolt is to secure the idler pulley assembly to the body of the machine. The idler pulley functions to engage the turning mechanism of the yard tool when engaged. The power yard tools that require an idler pulley which would use this screw are tillers, riding mowers, yard tractors, tillers, snow blowers and chippers. Engaging the rotating part of the yard tool places a great deal of resistance on the idler pulley, which may eventually result in it needing to be replaced. When replacing the idler pulley assembly, it's important to remember that the attaching hardware, such as the hex bolt, has also experienced a great deal of wear and should be replaced as well. This hex bolt attaches the idler pulley assembly directly to the machine housing and can be removed with a 9/16 wrench. Make sure when replacing the bolt to use a genuine OEM manufactured part that is identical to the manufacturer's original piece. This bolt is compatible with the following brands: Yard-Man, Bolens, Craftsman, Yard Machines, Troy-Bilt, Cub Cadet, Huskee, Ryobi, Murray, MTD, MasterCut, and Montgomery Wards.

Auger won't turn or sheared off? This roll pin connects the driveshaft to the auger and acts as a safety shear pin. Quick 10-minute fix for most models.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Compression spring for lawn mowers and outdoor power equipment. Replaces broken, worn, or missing springs. Essential hardware for proper operation.

Flat washer for lawn tractors and outdoor power equipment. Replace if washer is missing, worn, or damaged during maintenance or repair work.

This lift cable assembly is a genuine MTD part, sold individually. This lift cable assembly can be used as a replacement part in a lawn mower or a lawn tractor. The purpose of the lift cable assembly in a lawn mower or a lawn tractor is to affix to the lift shaft assembly and around the roller pulley.The lift cable assembly might need to be replaced at some point within the standard lifespan of a lawn mower or a lawn tractor if the component suffers damage that renders it beyond functionality. This damage can manifest in the form of punctures, scrapes, scratches, dents, cracks, or erosion. If this damage prevents the component from functioning as usual, the lift cable assembly will have to be removed and replaced by this genuine OEM replacement part before using the lawn mower or lawn tractor again. It is a simple replacement process that will require only basic tools.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This lift cable assembly is compatible with the following outdoor appliance brands: MTD and Troy-Bilt.

Replace a worn auger shaft bearing housing causing excessive noise or wobbling auger movement. Fits most single and two-stage snow blowers.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

Cap screw for snowblower attachments. Secures components in place for proper operation. Replace when missing, stripped, or damaged to restore assembly.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This right angle drive is a genuine MTD part, sold individually. This right angle drive can be used as a replacement part in a snowblower. The purpose of a right angle drive in a snowblower is to allow the appliance to make sharp turns across corners by transmitting a certain amount of torque to the appliance within the gearbox mechanism.The right angle drive in a snowblower might have to be replaced if it can no longer perform its critical function and allow the operator to maintain free range of motion over the appliance while it is in use across a variety of surfaces. If the snowblower is struggling to make turns at its usual pace and speed, it is likely that the right angle drive has suffered damage and will need to be removed and replaced by this genuine OEM replacement part for continued use of the snowblower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This right angle drive is compatible with the following outdoor appliance brands: MTD.

Replace a worn or damaged flexible coupler causing power transfer issues in your snowblower attachment. Connects to the hub for reliable operation.

Auger bearing for snow throwers supports rotating shaft movement. Replace if you hear grinding noise or auger doesn't spin smoothly. Verify fit with model.

This drive pulley is a genuine Husqvarna part, sold individually. This drive pulley can be used as a replacement part for a snowblower. This drive pulley secures the drive belt so that it can rotate and drive the snowblower engine.The drive pulley might have to be replaced if it cannot maintain the placement and positioning of the drive belt. Always remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This drive pulley is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Yard Man.

This is a Yard-Man drive mounting bracket compatible with snow throwers. Mounting brackets serve to hold objects to various surfaces, and must be durable. Through everyday wear and tear and exposure to the elements, they will eventually need to be replaced, but this one is built to last a long time.To mount a snow thrower onto a lawn tractor, first take off the front shell of the tractor. Next, install the mounting bracket on each side of the front of the tractor as well as one in the front. There will be screws to screw in, as well as a mounting bracket on each side in the bottom middle of the lawn tractor, along with a screw behind it. The bottom piece will slide into this middle structure with a pulley on the bottom for the belt from the snow thrower. The snow thrower will mount into the mounting bracket placed on the sides and the front of the tractor. It will be held on via a bar with some brackets. The controls will be activated through battery clips, and run towards the driver seat off the thrower. This drive mounting bracket is a genuine OEM part sourced directly from the manufacturer and is sold individually.