Parts for Husqvarna 917374080: Handle / Engine / Housing Parts

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This is a genuine replacement wheel for select push mowers. The wheels assist with maneuvering the Lawn Mower and keeping the mower deck from coming in contact with the ground. On select models, the wheels are what offer a cutting height adjustment so that the grass can be cut to the appropriate length. Wheels can be damaged or become worn with regular use, necessitating a replacement. This wheel can provide the appropriate manufacturer part for compatible machines. Those who need to replace multiple wheels will have to order this part in multiple quantities. This genuine OEM replacement wheel is designed to be compatible with select lawn equipment from Husqvarna and Weed Eater. The wheel is made of durable composite plastic and sold as an individual piece. The washer and axle bolt required to secure the wheel will need to be purchased separately. This part can be replaced with a wrench and should only take a few minutes to repair. Always wear gloves when working on lawn equipment.

This is a replacement shoulder bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or misplaced bolt on a variety of different lawnmower models. This bolt is a standard piece of hardware and has multiple varying uses. When replacing standard hardware, it's important to use OEM parts, such as this bolt, to ensure high quality and longevity. If using this bolt on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where this shoulder bolt can be used, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this shoulder bolt is suitable for use on several different lawnmower models and small engine power equipment manufactured by Husqvarna, Poulan, WeedEater, Murray, Craftsman, and others. This is a genuine part made of high-quality, durable metal and is sold individually.

This genuine Husqvarna selector knob affixes to the selector spring as part of a mechanism that lowers and raises the handle of the lawn mower for flexible usage.The selector knob might have to be replaced in the event that it suffers damage that impedes its ability to lower and raise the handles of the lawn mower. This kind of damage can occur as a result of general wear and tear from long-term usage, exposure to the elements, or a direct collision that warps the selector knob beyond repair. If any of this form of damage occurs and prevents the adjustability of the handles, the selector knob should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This selector knob is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman.

This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This hex bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is used in multiple applications in outdoor power equipment to connect components, such as attaching the fuel tank to the body of a lawnmower. The hex bolt has a six-sided head that is removed or installed using a hex wrench. Hex bolts can become loosened due to vibration during use and will need to be tightened during regular maintenance. If the bolts are rusted or have fallen out and are lost, replacements can be installed. Always wear gloves when working with equipment. Make sure the equipment has had time to cool down to prevent burns. Locate the part that has a missing or damaged hex bolt. If necessary, remove components that are in the way. Use a hex wrench or box wrench to loosen the bolt that needs to be replaced. Once loosened, the bolt can be manually removed by hand; gripping the sides of the head and turning will unscrew the bolt. Pull the bolt out and insert the one. Screw as far down as possible by hand. Finish tightening using a hex wrench. Do not overtighten.This hex bolt is made of heavy-duty metal and is sold as an individual unit. It is compatible with lawnmowers, lawn tractors, and other machinery manufactured by Husqvarna, Bluebird, Poulan, and Craftsman.

This is a blade for a walk-behind lawnmower. A new walk-behind lawnmower blade may be needed if the original is cracked, broken, or damaged in any way. The lawnmower blade can become damaged if it hits a rock, a curb, a landscape block, or other hard objects. It is essential to use extreme care and caution while performing care and maintenance or replacing the lawnmower blade as it can cause serious injury. Wear gloves to protect hands during the replacement process.This lawnmower blade is a genuine OEM Husqvarna part. It is sold individually. This specific lawnmower blade is compatible with walk-behind lawnmowers that are manufactured by the Husqvarna brand and the Jonsered brand.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of a hinge rod in a lawnmower is to affix to the discharge chute so that the chute has a range of motion while remaining attached to the appliance to fulfill its function.The hinge rod in a lawnmower might have to be replaced if it is damaged. The hinge rod could be punctured, scraped, dented, cracked, or eroded to the point that the hinge rod can no longer affix to the discharge chute or that the component is loosened to the point that a repair cannot fix it. If this occurs, the hinge rod should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Ariens, Murray, and Poulan.