Parts for Craftsman 247374880: Handle / Frame / Fuel Tank / Wheels Parts

Carriage bolt for lawn mowers, snow blowers, tillers, and edgers. Works with a nut to secure metal components. Replace if worn, stripped, or missing.

This genuine OEM replacement jam nut attaches to the idler bracket on a tiller. Jam nuts are a special type of nut designed to not unthread or strip out over time. Jam nuts are usually fastened on with another standard nut and then the two nuts are tightened against each other. Jam nuts can be easily identified from a standard nut because they are roughly half the size. Jam nuts can be lost while making repairs because of their small size. If lost, it might not affect the idler bracket immediately, but over time the standard nut may begin to slip or unthread. Therefore, the jam nut should be replaced as soon as possible. When making this replacement, be sure to unthread the standard nut as well and then tighten them both together using a wrench. This replacement jam nut is a high-quality part sourced from its original manufacturer. It is compatible with Troy-Bilt, Yard Man, Huskee, MTD, Ryobi, Yard Machines, and Cub Cadet tillers. This part does not ship with any additional hardware.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Hex head screw for lawn mowers and outdoor power equipment. Replaces damaged, stripped, or missing screws. Essential for secure assembly and repairs.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Replace worn spring bell washers causing loose parts or rattling noises. This conical washer cushions heavy loads in lawn equipment. Simple DIY fix.

This genuine MTD shoulder screw is an OEM replacement for use on select MTD machines and outdoor power equipment. The shoulder screw has several applications depending on the exact model of equipment, although it is often used to hold handles in place on push mowers. These screws can become worn or get lost over time, necessitating a replacement. It's important to always use genuine OEM parts when making a replacement on outdoor power equipment. This OEM shoulder screw is manufactured to exact standards by MTD and designed to work with several machines that are manufactured by the brand, along with select models from other outdoor power brands. It is sold as an individual unit, and those who need more than one will have to purchase additional quantities. This part can generally be replaced with minimal effort and won't usually require much disassembly. Gloves should be worn for safety whenever working on outdoor equipment, and it may be a good idea to disconnect the spark plug, as well.

Shoulder screw for front-tine tillers and walk-behind mowers. Secures components in place. Replace if screw is stripped, missing, or damaged.

Wheel clutch cable kit for gas walk-behind mowers. Installs to engage and disengage the drive system. Replace if cable is frayed, broken, or stretched.

If your mower won't stop or the brake feels loose, you may need a new brake transmission cable. This control cable manages braking during operation.

If your mower won't stop when you release the blade control, this brake cable restores safe operation. Straightforward cable replacement fix.

This lift assembly is a rear deck lift assembly. It is a genuine MTD part. It is a replacement part for lawn mowers.The lift assembly on the rear deck of the mower is subject to wear and tear and may break down and need to be replaced. To make this repair, some disassembly of the mower deck is required. Be sure to take proper safety precautions, such as allowing the engine to cool completely, disconnect the spark plug to prevent the engine from starting accidentally, and empty the fuel tank. Always wear protective gloves.This lift assembly is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with mowers, tractors, and other equipment manufactured by MTD, Craftsman, and Cub Cadet.

Front lift assembly for walk-behind mowers. Replaces worn, cracked, or damaged front lift mechanisms. Essential structural part for deck adjustment.

Light socket for lawn tractors and outdoor power equipment. Replace when socket is cracked, corroded, or bulb won't stay secure. Verify fit with your model.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

Click pins are used in various lawn equipment machines to hold the wheels on. For larger riding lawn mowers, click pins are only used on the smaller front wheels. The click pin penetrates through the axle spindle to hold the tire in place. The part can get lost, damaged, or wear out with regular use. It's also possible to misplace the click pin when changing a tire because it has to be removed first before working on the wheel. A missing, damaged, or worn click pin must be replaced.Click pins are very easy to replace with only a pair of pliers. Wear gloves when making the repair. Start by pulling out the old click pin from its location with the pliers. Insert the new click pin back into the hole located in the spindle.This click pin is a genuine OEM replacement part. It is made with durable, high-quality metal. It is supplied by the manufacturer. It is compatible with both MTD and Murray brands. The equipment the click pin can be used with includes lawn tractors, lawn machines, and other lawn equipment. It is sold as an individual unit.

Replace your cracked, worn, or missing lawn mower grip handle. This control handle installs on the handlebar to help you safely operate your machine.

Protects mower internals from rocks and debris. Replace if cracked, broken, or missing to prevent damage to belts and components. Verify fit with model.

Replacement snap spacer for walk-behind mowers. Maintains proper component spacing and prevents rubbing. Replace if cracked, broken, or missing.

Deck height adjustment lever for walk-behind mowers. Installs on the mower deck to control cutting height. Replace if cracked, bent, or broken.

Flat washer for lawn tractors and outdoor power equipment. Fits between fasteners and surfaces. Replace if worn, corroded, or missing for proper fit.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

Shoulder screw for lawn mowers and tractors. Secures parts in place during operation. Replace if sheared off, stripped, or missing for safe use.

This bearing flange is used on a wide variety of lawnmowers and lawn tractors. Unlike other bearings, the flange bearing is used to ensure the axle assembly stays securely attached to the pivot axle. The purpose of the flange bearing is to make sure the axle is able to move freely and in an effortless manner. The bearing undergoes a large amount of friction and stress while in use, so it can start to wear down.If the lawnmower is showing signs of wear at the flange bearing, it should be replaced. It's a good idea to regularly inspect the part to be sure it is in good shape. To replace the flange bearing, remove the bolt from the steering shaft and remove the old bearing. Grease the new bearing and the shaft before reinstalling the part. Reassemble and tighten all parts.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The flange bearing is made to be compatible with lawnmowers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This replacement part is a hex screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This screw can be used in a variety of ways depending on the repair needed. Hex screws are similar to normal screws except they have a six-sided head, like a hexagon. A new hex screw might be needed if the current one is damaged or missing. It is common that screws may become stripped or loose overtime, causing them to fall out. If any parts of the lawn mower are becoming loose or falling off, the hex screw might be missing. This replacement should be fairly easy and should only require a screwdriver and possibly pliers. This part is a genuine OEM replacement part and is sold individually. Be sure to purchase the correct amount as some appliances require more than one hex screw.

Fuel cap with attached tether hoop for lawn mowers and garden tractors. Replace your cracked, broken, or missing gas cap to secure your fuel tank opening.

This is a complete wheel assembly designed for use on a lawn mower. It includes the wheel, tire, and mounting hardware needed for proper installation. Replace this assembly if the existing wheel is cracked, wobbling, has a flat or worn tire, or if the mower is difficult to push and maneuver evenly.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

Replace your lawn mower's hex head tap screw if lost, stripped, or damaged. This small fastener secures components on mowers, tillers, and edgers.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Flat washer for lawn mower assembly. Replaces worn, missing, or damaged washers. Ensures secure bolt and fastener connections throughout your unit.

Hour meter that tracks engine runtime on lawn mowers and tractors. Mounts to the dashboard to monitor service intervals. Replace if cracked or missing.

If your mower won't start or turns over but won't crank, the ignition switch may be faulty. This key-operated switch controls electrical power.

Filters debris from fuel before it reaches the engine. Replace annually or when experiencing fuel flow issues. Confirm fit with your model number.

This is a clear plastic headlight lens cover that protects the bulb on a snowblower. It shields the light from snow, ice, and debris while allowing illumination for safe operation in low-visibility conditions. Replace this lens if it is cracked, yellowed, or missing, which reduces light output and leaves the bulb exposed to the elements.

This is an authentic OEM replacement flange bearing sourced directly from the manufacturer that is a component in many different lawn and garden machines. The flange bearing is used to tightly fit between two connected components. This connection creates an airtight seal. Over time and with normal wear and tear, the flange can become worn and lose the seal. When this happens, the flange will need to be replaced. The flange helps to distribute the weight load in some instances and if it is damaged, the weight would be displaced and could lead to serious energy.Replacement depends on the location of the flange that needs to be replaced. Place the equipment on a flat surface and disconnect the spark plug wire. Take the machine's components off as needed to access the flange and remove it using a pair of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Reassemble the machine using a reverse process.This flange is a heavy-duty part that is sold as an individual item. The flange bearing can be used with lawnmowers and other lawn and garden machines manufactured by Craftsman.

Secures hoses on outdoor power equipment to prevent leaks and maintain proper fluid flow. Replace if loose, corroded, or damaged. Verify fit with your model.

Oil draining slowly or leaking during changes? This oil drain valve ensures quick, clean oil changes on your lawn mower. Simple DIY install in minutes.

Replace worn rubber grommets causing rattling or exposed wires on lawn tractors and mowers. This protective seal prevents abrasion and vibration damage.

Black ignition key for lawn tractors and riding mowers. Replace lost, broken, or worn ignition keys. Direct fit for starting your mower's engine.

Replacement light bulb for snow throwers and lawn mowers. Replace when bulb burns out or provides dim lighting. Confirm fit with your model number.

Engine won't start or leaks gas? This fuel valve controls fuel flow from tank to engine. Common fix for leaking or stuck valves. Easy 15-minute repair.

Replace cracked or deteriorated vent hose on your lawn tractor or riding mower. This 3/16" ID hose connects fuel tank ventilation components.