Parts for Yard-Man 31AE5KLF801: Handle Panel Parts

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

Fastening screw for snowblower component assembly. Replaces lost, stripped, or damaged screws that secure panels, covers, or internal parts.

Hex socket screw for snowblower assembly. Secures components and panels. Replace if stripped, rusted, or missing to maintain proper fit and stability.

Replaces a damaged, stripped, or missing oval screw on your lawn tractor or outdoor power equipment. Used to secure covers, panels, and components.

Fully-threaded hex tap screw for lawn tractors and outdoor power equipment. Fastens machine components together. Replace if damaged, stripped, or missing.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Hex nut with thread-locking patch for snow thrower assembly. Secures components throughout the machine. Replace if stripped, missing, or damaged.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

Replacement shift knob for snowblower control lever. Installs on the shift rod to adjust speed and direction. Replace if cracked, broken, or missing.

Headlight lamp for gas snowblowers and walk-behind mowers. Replace when bulb burns out or dims to restore visibility during operation. Verify fit.

Light socket for lawn tractors and outdoor power equipment. Replace when socket is cracked, corroded, or bulb won't stay secure. Verify fit with your model.

Heated grip for gas snow blowers. Replaces worn, cracked, or missing handlebar grips. Restores comfort and control during snow removal operations.

This part is a replacement lock plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective lock plate on snowblowers. This lock plate works by locking the auger handle securely into position when the user is adjusting the snowblower chute. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. Proper tools may be required to install this part. For more accurate information on how and where to install this lock plate, the appropriate owner's manual and equipment diagrams should be referenced. This lock plate is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with snowblowers that have been manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, Husky, and Troy-Bilt.

Snowblower won't engage or auger slips during operation? This cam clutch lock secures the drive mechanism. Common repair for engagement issues.

Clutch lock spring for gas snowblowers. Secures the clutch mechanism in position. Replace if spring is stretched, broken, or missing to restore proper function.

Flat washer for lawn tractors and outdoor power equipment. Increases screw bearing surface area. Replace if worn, damaged, or missing during repairs.

This flat washer is used to attach the idler pulley in a number of small and medium sized gasoline powered engines. These engines include snow blowers, log splitters, riding mowers, lawn tractors, and chippers. Because the idler pulley is subject to a great deal of resistance when the pulley is engaged, eventually the pulley will wear out. Should there be a squealing sound when engaging the drive, the problem is likely the idler pulley. In these cases, the pulley must be replaced. It is a good idea to replace the surrounding hardware when replacing the idler pulley; tNhis includes the flat washer, which is subject to corrosion during heavy use. To replace the idler pulley, first detach the spark plug cap. If on a mower or tractor, drop the mower deck. Remove the original pulley and install in order: replacement pulley, hex bolt, flat washer, flange nut. Apart from dropping the mower deck, the only tools required to complete this installation may be a 9/16 ratchet and combination wrench. This washer is a genuine OEM replacement part, designed to perfectly replicate the original piece. This washer is compatible with Troy-Bilt, Yard Man, Yard Machines, MTD, and Craftsman devices.

Shoulder screw fastener for gas snowblowers. Secures components with precise spacing. Replace if threads are stripped, head is damaged, or screw is missing.

Shoulder screw for gas snowblowers and walk-behind mowers. Replace this fastener if worn, stripped, or missing to secure moving components properly.

Z-shaped cable fitting for tillers and snow blowers. Connects and guides control cables at the handlebar or engine. Replace if bent, cracked, or missing.

Speed selector cable for gas snowblowers. Connects speed control lever to transmission. Replace if cable is frayed, broken, or detached from controls.

The cable barrel holder securely holds the clutch cable against the clutch control handle on many types of lawn and garden equipment. The part is made of durable plastic and plays a large part in ensuring the lawn equipment works properly. Through use and time, the cable barrel holder can become damaged or break and will need to be replaced.If the cable barrel holder snaps or is otherwise damaged, the first step is to take the equipment and put it on a flat surface. Remove the spark plug wire and wear a pair of work gloves. The broken cable barrel holder can be removed using a screwdriver and a socket set. Once it has been taken off, the new component can be installed in its place with the cable running through it.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The cable barrel holder is made to be compatible with lawnmowers, tillers, and snowblowers manufactured by MasterCut, Yard-Man, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Cub Cadet, and Craftsman.

Shift lever for gas snowblowers. Installs on the control panel to allow gear selection. Replace if cracked, broken, or worn from heavy use.

Flat washer for lawn mower assembly. Replaces worn, missing, or damaged washers. Ensures secure bolt and fastener connections throughout your unit.

Carriage bolt for lawn mowers, snow blowers, tillers, and edgers. Works with a nut to secure metal components. Replace if worn, stripped, or missing.

This part is a replacement push nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached push nut in snow blowers.Push nuts are a special type of fastener that secures together different equipment components. Push nuts will need to be replaced if worn, broken, lost, or otherwise ineffective. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this push nut, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This push nut can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

Rubber grommet for snow blower assembly. Fits through mounting holes to protect wires and cables. Replace if cracked, torn, or missing.

Chute crank assembly for snowblowers. Controls the direction of snow discharge from the chute. Replace if cracked, broken, or no longer rotating smoothly.

Right upper handle for snow throwers. Replaces damaged, cracked, or broken handles. Essential structural component for control and operation.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

This OEM screw is a fastener with a trimmed six-sided or hexagonal head plus a washer face on the bearing surface. It is one of the most commonly used fasteners. Considered standard hardware, this component has multiple applications and can be used on woodworking, machine assembly, and mechanical repair. The screw is 3/4 long and has a thread size of 5/16 -18. A hex cap screw is installed into tapped holes by turning the head to fit and tighten. This is the fastener of choice in applications where tight tolerance is necessary. This is a genuine factory part sourced from the manufacturer and is sold individually. It can be used with Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut brands of lawn maintenance equipment including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers.

E-ring retaining clip for snowblower assemblies. Secures pins and shafts in place. Replace if bent, missing, or worn to restore proper retention.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Steering trigger handle for gas snowblowers. Mounts on handlebar to control steering mechanism. Replace if cracked, broken, or missing for proper control.

Steering trigger pin for snowblowers. Secures the steering trigger mechanism. Replace if pin is bent, sheared, or missing to restore proper control.