Parts for Weedeater WT3100: Handle / Wheels / Frame / Axle Parts

This replacement part is a hex nut. This is a genuine replacement part made by Husqvarna. Hex nuts are small but important to the overall workings of different types of machinery. These parts work with other small pieces like screws and washers to ensure that all parts of the machine are in place and secure.A new hex nut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or a single incident. It is not uncommon that hex nuts experience large amounts of friction over time and can become worn down after a while. Refer to the owner's manual for specific directions on how to replace this part.This hex nut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The starter rope is a feature of the recoil starter mechanism. It is used to pull-start the engine. With use, over time, and as a result of accidental damage, a rope kit may be necessary to repair broken parts of the starter assembly. Signs that starter rope needs to be replaced include visual wear or a break in the component.Replacing a starter rope is simple. It should be done only after the machine has been cooled completely. Wear protective gloves during the repair. Remove the damaged or worn-out starter rope first before securing the new replacement starter rope in position. Try a test pull to ensure the cord is installed properly.This rope kit is an authentic OEM replacement part. It is supplied by the manufacturer. It is sold as an individual unit. The rope kit is made of high-quality, durable nylon materials. It is compatible with Weed Eater and Husqvarna machines. The rope kit can be successfully installed in an assortment of trimmers and edgers.

This locknut is a genuine Husqvarna part, sold individually. This locknut can be used as a replacement part in string trimmers, leaf blowers, edgers, and chainsaws. The purpose of a locknut for one of these small engine outdoor appliances is to serve as a fastening component within the internal mechanisms of the appliance in conjunction with a bolt.If the locknut has been stripped away or, in its absence, has left one or more components detached from the appliance, the locknut should be replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This locknut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, and Paramount.

This air filter hose is specifically for use with certain models of wheeled trimmers. This piece will attach to the air filter cover and will allow intake air to enter the filter. When working properly in conjunction with the filter, it helps to ensure controlled air makes it into the engine. If there is any damage to the hose that creates a leak, it could compromise the flow of air and create issues with how the engine is running.The hose is made from durable plastic, but it may still need to be replaced at some point. It could have a crack or a hole that allows air to leak from it. It may no longer fit properly, which could cause problems with the trimmer, as well.This air filter hose will work on select models of trimer from Weed Eater and Husqvarna. The hose is sold individually. This is an authentic OEM replacement part that has been sourced from the manufacturer.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a screw. This is a genuine replacement part made by Husqvarna. This part is typically very small but important to many different types of appliances. They are responsible for holding things in place so that the engine can run smoothly.A new screw might be needed if the current one is missing or damaged. This might include being dented, bent, or cracked. It is not unusual for screws to be stripped down after years of normal use. If this is the case is it recommended that these parts be replaced as soon as possible. The repair should be simple and only require a screwdriver and possible pliers if the previous screw is lodged in place. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This replacement part is a hex nut. This is a genuine replacement part made by Husqvarna. Hex nuts are small but important to the overall workings of different types of machinery. These parts work with other small pieces like screws and washers to ensure that all parts of the machine are in place and secure.A new hex nut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or a single incident. It is not uncommon that hex nuts experience large amounts of friction over time and can become worn down after a while. Refer to the owner's manual for specific directions on how to replace this part.This hex nut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.