Parts for Troy-Bilt 21A-630B063: Handlebar / Cable Parts

This part is a replacement upper handle bar. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective upper handle bar in a variety of tiller models.The upper handle bar is what allows the user to maneuver and control the tiller properly. It will need to be replaced if bent, dented, detached, or ineffective in any way. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this upper handle bar, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this upper handle bar is suitable for use on tillers manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Screw hex caps are found on lawn equipment and other small machines. Over time, with the machine's use or following accidental damage, a screw hex cap may break or become loose. In order to continue safely operating the machine, the part must be replaced. A missing or damaged screw hex cap can cause the equipment to move in unpredictable ways. Check for excessive vibration or noise.Always wear gloves for protection when replacing parts on lawn equipment. Tools required may include a socket set, wrench set, and a screwdriver. Screw hex caps are quick and easy to replace. Make sure that the replacement screw hex cap is installed correctly and properly secured for a tight and long-lasting fit.This screw hex cap is an authentic OEM replacement part. It is supplied by the manufacturer. The replacement screw hex cap is made of durable metal and is gold in color. The replacement piece can be used in a variety of machines, including chippers, shredders, cultivators, edgers, lawnmowers, lawn tractors, and snowblowers. The screw hex cap is compatible with Husky, Cub Cadet, Ryobi, Bolens, Yard Machines, Yard-Man, Troy-Bilt, and MTD. It is sold as an individual unit.

This replacement part is a screw. This is a genuine replacement part made by MTD. This part is small but important in many types of appliances. A screw typically works with other small pieces like washers and nuts to keep larger parts secure and in place during use.A new screw might be needed if the current one has been stripped or lodged in place. This part can become damaged due to normal wear and tear over time. This should be a simple repair and require common household tools like a screwdriver or pliers if the current screw is stuck in its current spot. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This OEM replacement part is a forward clutch spring. The forward clutch spring, also known as the extension spring, is commonly used to allow the idler pulley bracket to pivot when activating or turning off the blade rotation. If the blades are no longer rotating properly, this part might need to be replaced. Luckily, this is a very simple process.To replace the extension spring, start by removing the mower deck. Once removed, locate the spring. Once visible, unhook the top portion of the spring from the hole it is attached to. Replace the old spring with the new one and make sure it is attached securely. Reinstall the mower deck. This genuine replacement part is sold individually and is compatible with MTD brand lawnmowers.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This is a drive control cable that is used on a variety of Troy-Bilt tillers. The cable is made of durable materials and includes small metal connectors on each end of the cable. These connectors are delicate and may break or wear out when using the tiller. If this happens, the drive control cable will need to be replaced. The cable is an integral part of the tiller since it controls the speed of the tines that work through the earth. If the cable becomes damaged, the tiller may not start or keep the correct speed.If the cable itself or the end connectors are worn out or broken, the drive control cable should be replaced. No tools are required for the process, but a pair of work gloves will be useful. Untwist the original control cable to remove it from the machine. Place the new control cable into its place and reassemble any other parts.This drive control cable is sold as an individual component. It is an authentic replacement part that is sourced directly from the manufacturer. The cable is designed for use with several models of tillers manufactured by Troy-Bilt.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.