Parts for Mtd E970-E979: Handles E979 Parts

This replacement curved hd. screw is also known as a carriage bolt. The screw can be used on many types of lawn and garden equipment. The purpose of the screw is to hold and support the upper and lower handles of the machine. It works along with the hand knob to help secure the handles, but buyers should know that the knob is sold separately. Owners might need to replace the carriage bolt if it has become corroded or no longer properly secures the handles. If the owner has lost the bolt, they will need to buy a new one before they can use their machine. The replacement for this part is fast and simple. This is an authentic OEM replacement curved hd. screw that is sold individually. It is for use with lawn mowers, tillers, snowblowers, wood chippers, edgers, and leaf blowers. It is compatible with certain models from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

A star knob connects the upper and lower handles on an outdoor appliance, and if removed, the upper and lower handles are quick-released. This part is made of black heavy-duty black plastic, and the threads are made of steel. Over time, the threading can become worn out, making the connection loose, and causing the two handles to no longer stay in place. Star knobs are a straightforward repair that can be done in a matter of minutes. Just unscrew the original, damaged knob and screw in the new knob. The knob is designed to be unscrewed by hand, so there is no need for additional tools to make this repair. This genuine OEM replacement part is designed for a variety of outdoor appliances, including lawnmowers, edgers, chippers, tractors, trimmers, and cultivators. This star knob is compatible with Yard Machines, Yard-Man, Cub Cadet, Bolens, Craftsmen, and Ryobi products. This part ships individually.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a throttle lever that is used in many types of lawn and garden equipment. It is one of the components in the throttle assembly. The purpose of the throttle lever is to stop the engine whenever the user moves the lever into the full choke position. Sometimes, wear and tear or damage can cause issues with the throttle lever. If the lever is broken, it may not be possible to move the component, and it will need to be replaced. Excessive dirt and debris can also cause issues with the throttle lever. If the throttle lever needs to be replaced, pliers and a screwdriver will be needed for the process. The first step is to remove the throttle assembly and the cable attachment on the clutch. Take the cable out of the throttle lever before removing the lever itself. The new component can be installed in the same position before reassembling the tool.This throttle lever is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The lever is made for use with edgers and lawnmowers manufactured by Bolens, Cub Cadet, Huskee, MTD, and Yard Machines.

This replacement part is a nut, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Nuts are a small part found in many different types of machinery and are used to connect different parts and secure things together.A new nut might be needed if the current ones are missing or damaged in any way. It is common that nuts become stripped overtime and might get stuck or fall out of place. In this case, it is recommended that the nut be replaced. Be sure to review the specific owner's manual for more information on how to replace the nuts. This part is sold as an individual piece. Be sure to purchase the correct amount as many different machines use more than one during operation. This is also a genuine OEM replacement part sourced directly from the manufacturer.

This is a throttle body intended for use with lawnmowers and tractors. The throttle body is attached to the control cable, the throttle control wire, and the throttle lever. It can be damaged or wear out with regular use. Signs that the throttle body is failing or going bad include a very low idle or poor idle. Stalling of the machine when stopping the device is another indicator that the throttle body is bad. When this happens, a new throttle body must be installed.Replacing a throttle body is simple. It requires a set of pliers, a wrench, and a screwdriver. Always wear gloves when working on a throttle body repair. Make sure to allow time for the machine to cool completely before beginning the repair.This throttle bottle is an authentic OEM part. It is supplied directly from the manufacturer. The throttle body is made of high-quality, durable plastic material. It is sold as an individual unit. The throttle body is compatible with Huskee, MTD, Yard Machines, Yard-Man, and Cub Cadet brands. It can be installed in various machines, including push-behind lawn mowers, lawn tractors, and other lawn equipment."

This is a drive control cable for use with lawnmowers. The purpose of the drive control cable is to engage the gear case, which allows the lawnmower to drive. If there is a problem with the cable, the mower will not function properly and will not move forward. The brake will not release. Before using the lawnmower, replace damaged or worn-out cables.These cables are durable and tend to last for a long time. However, they can still have problems as they age. In some cases, they might break. Parts of them might corrode and become damaged, as well. When a problem is noticed, owners will want to replace the cable. Use a pair of pliers to replace the drive control cable. The replacement is relatively easy and should not take long.The control cable is a replacement for certain lawnmower models from MTD, Yard-Man, Cub Cadet, and Troy-Bilt. This cable is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually.

This is a control housing kit that is designed for use on many lawnmowers. It is a kit that contains three different plastic housings. Each of these parts is used to secure the handle controls onto the upper handle for security and protection. The components are durable but can be damaged, become broken, or experience wear and tear. When this happens, the country housing kit should be used to replace the parts.When replacing the control housings on a lawnmower, a screwdriver will be needed. A pair of work gloves can also be useful for this project process. Make sure the lawnmower is powered off and located on a level surface. Disconnect the spark plug wire to ensure the engine does not turn on while making this project. Locate the broken housing and unscrew it from the tool before replacing it with a new component from the kit. Test the lawnmower before use.The control housing kit is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is made to be compatible with lawnmowers manufactured by MTD, Cub Cadet, Troy-Bilt, Yard Machines, and Yard-Man.

This is a replacement lawn mower transmission supplied directly from the manufacturer. The lawnmower transmission rotates the axle, which will move the wheels and propel the mower forward. The transmission may need to be replaced if it locks up, or if the mover won't move forward as it should.A pair of pliers, drill with a bit set, a socket wrench and nut driver set will be needed to replace this part. Start by disconnecting the spark plugs, then remove the drive cover, fuel tank cap, driver's screws, top, and bottom. Now the drive cover will come off. Remove the ground drive belt. Release the drive control cable from the lever. Take off the front wheels, and then the broken transmission can be removed. Install the new transmission assembly and reinstall the parts in reverse order. This lawnmower transmission is a genuine OEM replacement part. It is designed to be used with Craftsman, Troy-Bilt, Cub Cadet, MTD, and Yard-Man.

This tooth rack gear insert is a genuine MTD part, sold individually. This tooth rack gear insert can be used as a replacement part in a lawn mower. The purpose of a tooth rack gear insert in a lawn mower is to work in conjunction with other gear parts to transfer rotational motion into linear motion, which facilitates the inner mechanisms of the appliance to propel it forward for typical operation.The tooth rack gear insert in a lawn mower might be subject to damage that could negate or reduce its functionality within the inner workings of the appliance. If the tooth rack gear insert is subject to damage in the form of scraping, puncturing, warping, or general wear and tear from long-term use, the tooth rack gear insert should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This tooth rack gear insert is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Troy-Bilt.

This is a control housing kit that is designed for use on many lawnmowers. It is a kit that contains three different plastic housings. Each of these parts is used to secure the handle controls onto the upper handle for security and protection. The components are durable but can be damaged, become broken, or experience wear and tear. When this happens, the country housing kit should be used to replace the parts.When replacing the control housings on a lawnmower, a screwdriver will be needed. A pair of work gloves can also be useful for this project process. Make sure the lawnmower is powered off and located on a level surface. Disconnect the spark plug wire to ensure the engine does not turn on while making this project. Locate the broken housing and unscrew it from the tool before replacing it with a new component from the kit. Test the lawnmower before use.The control housing kit is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is made to be compatible with lawnmowers manufactured by MTD, Cub Cadet, Troy-Bilt, Yard Machines, and Yard-Man.

This is a control housing kit that is designed for use on many lawnmowers. It is a kit that contains three different plastic housings. Each of these parts is used to secure the handle controls onto the upper handle for security and protection. The components are durable but can be damaged, become broken, or experience wear and tear. When this happens, the country housing kit should be used to replace the parts.When replacing the control housings on a lawnmower, a screwdriver will be needed. A pair of work gloves can also be useful for this project process. Make sure the lawnmower is powered off and located on a level surface. Disconnect the spark plug wire to ensure the engine does not turn on while making this project. Locate the broken housing and unscrew it from the tool before replacing it with a new component from the kit. Test the lawnmower before use.The control housing kit is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is made to be compatible with lawnmowers manufactured by MTD, Cub Cadet, Troy-Bilt, Yard Machines, and Yard-Man.

This replacement part is a cable pulley intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Cable pulleys control the speed of the lawn mower. The user is able to use the cable pulley to control the speed of the machine throughout use.A new cable drive might be needed if the current one is snapped, broken, or damaged. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This replacement part is a bolt. This is a genuine replacement part made by MTD. This part is small but important to the overall workings of the machine. Bolts work with other parts such as screws and nuts to ensure that different parts are held in place and are secure during use. A new bolt might be needed if the current one has become loose, is missing, or has been damaged. This can include being dented, bent, or lodged in place. Be sure to replace it as soon as possible if this is the case. This should be a fairly simple repair and only require common household tools such as a screwdriver and pliers. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.

This spring washer has a conical shape with an open center. It has a shape like a traditional washer but is smaller than a typical coiled spring. These washers can handle a larger load than a coiled spring and are used in lawn and garden equipment to cushion heavy loads. Over time, these washers can experience wear and tear which will lead to damage or breakage. When this occurs, the spring washer will need to be replaced.Visually inspect the spring washer for damage like scratches, breaks, and dents. If these occur or the washer is warped, it needs to be replaced. The process involves removing the nut or screw above the washer with a screwdriver or other tool. After accessing the spring washer, it can be removed and a replacement part can be added to the equipment. Reassemble the parts and the equipment should work again.This is a genuine OEM spring washer replacement part that is sold individually. It's sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, string trimmers, and edgers by Craftsman, MasterCut, Toro, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in a lawn mower or a wood chipper.The screw in a lawn mower or a wood chipper might have to be replaced at some point within the typical lifespan of the appliance if it is lost, misplaced, or stripped away from general wear and tear over long-term usage. If the screw suffers from one of these things, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

This replacement part is a battery charger. It can be plugged into a wall outlet to charge a compatible electric lawn mower.A new battery charger might be needed if the current one is no longer adequately charging the mower. Over time, with heavy use, the wires within the charger may become detached or otherwise damaged, necessitating a new charger. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.