Hechinger Lawn Mower Parts

Rear discharge flap for walk-behind lawn mowers. Attaches to the back of the mower deck to contain grass clippings during operation. Replace if cracked or torn.

Oil drain sleeve fastener for lawn tractors and riding mowers. Secures the oil drain system. Replace if cracked, stripped, or missing for proper fit.

Controls lever movement for smooth gear shifting. Replace if mower won't shift properly or lever feels loose. Confirm fit with your model number.

Replacement wire that securely attaches the rear skirt trail shield to your lawn mower deck. Replace if broken, detached, or missing for proper skirt fit.

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

Flat washer flange for lawn mowers, snow throwers, tillers, and edgers. Replace when washer is missing, damaged, or worn to ensure proper assembly.

Replacement flat washer for lawn mowers and outdoor power equipment. Replaces worn, missing, or damaged washers. Installs between bolts and components.

Flange bearing enables smooth operation and prevents overheating in lawn mowers. Replace if equipment runs rough or bearings show wear. Verify fit.

Fix lawn mower vibration or loose components with this block bushing. Facilitates smooth rotational movement and secures internal machinery. Easy DIY fix.

Throttle control cable for lawn tractors and tillers. Connects throttle lever to engine carburetor. Replace if cable is frayed, broken, or stuck.

Fastener spacer for lawn mowers and snow blowers. Creates proper gap between components to reduce friction. Replace if lost, cracked, or worn.

Blade adapter kit for walk-behind and self-propelled mowers. Replaces worn, stripped, or broken adapters that connect the blade to the drive shaft.

This pivot bar is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, and chipper shredders. The pivot bar provides a means of steering the outdoor appliance.A pivot bar might have to be replaced if it suffers damage over time. Although there is not often a need to replace a pivot bar, as it holds up well to general usage and exposure to the elements, a pivot bar might have to be replaced if there is a collision or a traumatic impact as a result of a drop from significant height or onto a particularly hard surface. Additionally, a pivot bar might have to be replaced if there is deterioration in the spindle bushing, thereby exposing the pivot bar to potential damage. If this occurs, a replacement pivot bar part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This pivot bar is compatible with the following brands: MTD, Yard Man, Bolens, and Yard Machines.

Replaces cracked or broken blade height adjustment brackets on walk-behind mowers. Secures cutting deck leveling mechanism. Needed when missing or worn.

This is a genuine 5/16 hex nut, a standard piece of hardware used to affix various components securely. This MTD nut is used in multiple applications and has several placement options depending on the model of the engine. Nuts can become stripped or worn over time. In some cases, the screws they are attached to may become stripped, which might require a replacement of both. A wrench is required to complete the replacement. This hex nut is designed to work with several brands that feature MTD engines, including RYOBI, Yard Machines, Yard-Man, MTD, Troy-Bilt, Husky, Bolens, and Cub Cadet. There are hundreds of machines that use this nut, including tractors, lawnmowers, blowers, cultivators, and snowblowers. This nut is sold individually; purchase additional parts as necessary.

The cotter pin is a fastener that is commonly used in lawn and garden equipment. The cotter pin helps provide a secure, locking fit that is adjustable and easy to remove. The cotter pin is commonly used on axles and rods, but it can have many applications depending on the machine and model. Cotter pins can become worn or break down over time because they are exposed to constant vibrations. It is important to replace damaged or broken cotter pins immediately as a broken part can render the equipment useless in many cases. This cotter pin is designed to exact OEM standards by MTD, and is designed for use in various equipment from MTD, Troy-Bilt, Craftsman, RYOBI, Yard Machines, Hard Man, Poulan, Husky, Bolens, and Cub Cadet. This is a 5/16 cotter pin that features a #34 diameter, and is made of a durable metal. This part is sold individually and those who require more than one will have to order multiple quantities. No other hardware is included. Always wear gloves when working on lawn and garden equipment.