Parts for Mtd 13AM762F765: Hood / Dash - Models 761 & 771 Parts

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

This replacement part is a hex screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This screw can be used in a variety of ways depending on the repair needed. Hex screws are similar to normal screws except they have a six-sided head, like a hexagon. A new hex screw might be needed if the current one is damaged or missing. It is common that screws may become stripped or loose overtime, causing them to fall out. If any parts of the lawn mower are becoming loose or falling off, the hex screw might be missing. This replacement should be fairly easy and should only require a screwdriver and possibly pliers. This part is a genuine OEM replacement part and is sold individually. Be sure to purchase the correct amount as some appliances require more than one hex screw.

Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

A 12-volt bulb that provides forward lighting for the lawn tractor, mounted in the headlight housing. Replace when the light dims, flickers, or burns out completely.

Steering shaft support bracket for lawn tractors. Mounts to the frame to secure and stabilize the steering shaft assembly. Replace if cracked or broken.

Replace your lawn tractor's headlight lens and grill assembly when cracked, clouded, or damaged to restore visibility and protect the bulb. Verify fit with your model number before ordering.

This is a shoulder screw commonly used as a replacement for use with lawn tractors and mowers. This screw is used to secure the grille's pivot bracket on the machine. If the screw is damaged, it could be difficult to use the grille on the tractor. Replace the screw if they notice any problems.The shoulder screw is made from metal and it is durable. However, it could have some damage that would require a replacement. The threads might become stripped, or the screw could even start to corrode. The edges of the screw could also start to wear away. The screw is small, and it could be lost when working on the tractor, which is another reason a replacement may be needed.The shoulder screw will work for many tractor models from MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky. The screw is sold individually, so owners might want to have several of them available. This is a genuine OEM replacement part.

Right-hand pivot bracket for lawn tractors. Mounts to the frame to support steering or deck pivot mechanisms. Replace if bent, cracked, or broken.

Fix a riding mower that won't start or stay running with this screw-mount switch. Direct replacement part for lawn tractors and riding mowers.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Loose or tangled wires causing electrical issues? This cable tie secures and organizes wiring harnesses in lawn mowers. Simple 5-minute installation.

Replacement gas tank for lawn tractors and riding mowers. Installs on the frame to hold fuel. Needed when original tank is cracked, leaking, or damaged.

Seals the fuel tank on lawn tractors, mowers, and snow blowers. Replace if cracked, loose, or leaking to prevent fuel evaporation and contamination. Verify fit with your model number.

If your mower won't start or turns over but won't crank, the ignition switch may be faulty. This key-operated switch controls electrical power.

Black ignition key for lawn tractors and riding mowers. Replace lost, broken, or worn ignition keys. Direct fit for starting your mower's engine.

Throttle control cable for lawn tractors and riding mowers. Connects throttle lever to engine carburetor. Replace if cable is frayed, broken, or seized.

This OEM screw is a fastener with a trimmed six-sided or hexagonal head plus a washer face on the bearing surface. It is one of the most commonly used fasteners. Considered standard hardware, this component has multiple applications and can be used on woodworking, machine assembly, and mechanical repair. The screw is 3/4 long and has a thread size of 5/16 -18. A hex cap screw is installed into tapped holes by turning the head to fit and tighten. This is the fastener of choice in applications where tight tolerance is necessary. This is a genuine factory part sourced from the manufacturer and is sold individually. It can be used with Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut brands of lawn maintenance equipment including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers.