Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
Connects headlight wiring to enable on/off control. Replace if lights fail, wires are damaged, or connections are corroded. Confirm fit with your model.
Shoulder screw for lawn tractors and outdoor power equipment. Replace if screw is stripped, missing, or damaged. Secures components during operation.
Excessive engine noise from your lawn tractor? This muffler quiets loud engine operation. Replaces rusted or damaged mufflers. Moderate DIY repair.
The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.
Here is a replacement 12-volt headlamp that can be used with certain types of lawn and garden equipment. The headlamp, sometimes called a headlight or a lightbulb, is used on the front of the machine. It is similar to headlights in a car and will allow the user to continue using the machine in low light or even dark conditions. The headlamp can suffer damage just like any other lightbulb. It will wear out over time and will need to be replaced. It could also be damaged if the machine runs over or into an object. The headlamp replacement is simple and should take most people only a few minutes to complete. Many buyers like to have a couple of replacement bulbs on hand just in case. This is a genuine OEM replacement part that is sold individually. It will work on many models of snowblowers and lawn tractor. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.
Replace your lawn tractor's headlight socket if cracked, corroded, or damaged. Secures the headlight bulb in the front housing for proper mounting.
Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.
Flat washer for lawn mowers and tractors. Replace if missing, corroded, or damaged during maintenance. Ensures secure fastening of components.
Retainer bolt for lawn mowers and tractors. Secures components in place. Replace if lost, stripped, or damaged to restore proper fastening.
Hex cap screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if stripped, rusted, or missing hardware.
This part is discontinued by the manufacturer and is no longer available for purchase.
Dashboard panel for lawn tractors. Mounts to the front console area. Replace if your original panel is cracked, broken, faded, or missing pieces.
The ignition switch is the part of lawn and garden equipment that features an ignition to turn on and off with a switch. These are common on lawn tractors, as well as some lawn mowers, wood chippers, tillers, and log splitters. While these switches tend to be robust, they may eventually wear out. Some might have a mechanical failure after being used for years. Others might have electrical issues. Regardless of the reason for the failure, they will need to be replaced to continue using the machine. This is a genuine OEM part that is sold individually. It is a complete kit, which will include not only the switch, but also a washer and nut to secure the switch into the housing, and two ignition keys. The ignition switch can work with lawn tractors from brands such as MTD, Ryobi, Troy-Bilt, Bolens, Yard Machines, and Craftsman.
This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.
Engine won't start or runs rough? This choke control regulates air-fuel mixture for cold starts on lawn tractors and mowers. Typical DIY repair.
Fix a lawn tractor that won't start or runs rough with a new choke control cable. Restores proper fuel-air mixture for reliable engine operation.
The choke cable opens and closes the valve that controls the choke, or throttle, on the lawn mower. When the choke handle is depressed or pulled out, it will open or close the butterfly valve, controlling fuel flow to increase or decrease the speed and performance of the mower. Based on the type of tension cable that is used, this part can wear out or even snap from regular use and need to be replaced. The durable choke cable will be easy to install, but always disconnect the spark plug and wear gloves. This genuine OEM choke cable can be used with mowers from RYOBI, MTD, Husky, Yard Machines, Yard-Man, Troy-Bilt, Cub Cadet, and Bolens. It is made of metal and plastic and comes directly from the manufacturer to ensure quality. Sold individually.
Headlights won't turn on or off on your lawn tractor? This headlamp switch mounts on the dash panel to control tractor headlamp operation. Easy install.
Replace a cracked, broken, or non-functioning ammeter gauge on your lawn tractor. Installs on the dashboard to display battery charge levels.
Replacement screw for lawn mowers and outdoor power equipment. Used throughout the machine to secure components. Replaces broken, stripped, or missing screws.
Shift lever cover for lawn tractors. Protects shift mechanism from debris and weather. Replace if cracked, broken, or missing to maintain clean appearance.
Throttle control won't adjust engine speed or feels sticky? This throttle control box restores smooth speed regulation on lawn tractors and tillers.
Replacement truss head tap screw for lawn equipment engines. Secures various engine components. Replace if missing, stripped, or damaged during maintenance.
Throttle cable for lawn tractors. Connects the throttle control to the engine carburetor. Replace if cable is frayed, kinked, or broken.
35-inch throttle cable for lawn tractors and tillers. Replace your worn, frayed, or broken throttle cable to restore proper speed control functionality.
Hex washer head screw for lawn mowers and outdoor power equipment. Secures panels, covers, and components. Replace if stripped, missing, or damaged.
This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.
U-nut fastener for lawn tractors and riding mowers. Secures panels, covers, and components. Replace if missing, stripped, or damaged to restore proper fit.
Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.
Small metal washer that installs with screws and bolts throughout lawn mowers and outdoor power equipment. Replace if cracked, worn, or missing.