Parts for Whirlpool UXW6536BS0: 01 - Hood Parts

The Chimney is an OEM component specifically designed for Whirlpool ventilation hoods used above cooktop ranges. It vents fumes, steam, and smoke from the cooking surface up and out of the kitchen area.  

Symptoms of a bad chimney include grease caking and blocking proper airflow. Physical damage like dents could also disrupt venting performance.

Causes of a bad chimney include:

• Reduced or inefficient venting of fumes from cooking  
• Greasy film forming on range backsplash/walls near the hood
• Physical blockages restricting maximum airflow
• Vent motor straining from obstruction resistance

It keeps indoor air fresh for brands including KitchenAid, Jenn-Air and select Broan-Noren product lines.

The Chimney is an OEM component specifically designed for Whirlpool ventilation hoods used above cooktop ranges. It vents fumes, steam, and smoke from the cooking surface up and out of the kitchen area.  

Symptoms of a bad chimney include grease caking and blocking proper airflow. Physical damage like dents could also disrupt venting performance.

Causes of a bad chimney include:

• Reduced or inefficient venting of fumes from cooking  
• Greasy film forming on range backsplash/walls near the hood
• Physical blockages restricting maximum airflow
• Vent motor straining from obstruction resistance

It keeps indoor air fresh for brands including KitchenAid, Jenn-Air and select Broan-Noren product lines.

Replace your range hood damper if the original is cracked, broken, or missing. This damper installs inside the ventilation system to control airflow.

Replace your range hood light bulb to restore bright illumination over your cooktop. Install when bulb burns out or dims. Confirm fit with your model.

This inner oven door glass replaces a cracked or cloudy oven door panel so you can see food clearly and restore the door's insulation and appearance. It fits the oven door assembly and helps maintain heat containment. What it does:

• Replaces a damaged or cracked inner oven door glass panel
• Restores clear viewing of the cooking cavity for safe monitoring of food
• Helps maintain proper heat containment and overall door integrity
• Prevents drafts and reduces heat loss caused by broken or missing glass

• Handle with care; glass edges may be sharp and can break if dropped
• Disconnect power to the appliance before removing the oven door for service
• Follow the oven manufacturer's door-disassembly instructions; some doors require hinge release and clip removal
• If sealing or insulation is damaged, replace those parts as directed by the manufacturer

This inner oven door glass provides the viewing surface and protective barrier between the oven cavity and exterior door. It restores a clear viewing window and helps keep heat and cooking messes contained for safe, efficient use. What it does:

• Replaces cracked, chipped or fogged inner oven door glass to restore visibility.
• Protects the oven door interior and insulation from spills and heat damage.
• Helps maintain a proper barrier between the cooking cavity and the kitchen environment.
• Useful when the glass is visibly damaged, loose, or causing steam/fogging between panes.

• Disconnect power to the appliance before beginning any repair.
• Handle glass with heavy gloves and eye protection; place on a soft, stable surface.
• Many installations require removing the oven door and separating door panels—refer to the service manual or diagram for your model.

Traps grease particles to prevent buildup on blower and internal components. Replace when clogged or discolored. Verify fit with your model number.

Fix hood power issues with this terminal block socket. Connects wiring to electrical components. Common failure point causing intermittent operation.

Fix a humming or slow-starting range hood motor with this motor run capacitor. Restores smooth operation and reduces startup problems in minutes.

This fan motor circulates air inside the refrigerator to help maintain even cooling and consistent temperatures. Replacing a worn or failed fan motor restores airflow for proper cooling performance. What it does:

• Powers the refrigerator fan blade to move air across the evaporator/condenser coils
• Helps prevent warm spots and reduces excessive frost buildup caused by poor airflow
• Eliminates grinding, whining, or intermittent fan operation when motor bearings fail
• Supports compressor efficiency by maintaining proper airflow through the cooling system

• One fan motor

• Disconnect power to the appliance before starting any repair
• Access varies by model; motor may be behind an evaporator cover, rear panel, or under a kickplate
• Handle fan blades and evaporator fins carefully to avoid damage or cuts
• Verify fan blade is seated correctly and spins freely before reassembling; test operation after reinstall

Mounting hardware kit for range hoods. Includes screws, bolts, and fasteners needed to securely install your hood. Replace missing or damaged hardware.

Decorative chimney extension for range hoods. Covers ductwork between hood and ceiling. Replace if dented, scratched, or discolored. Stainless finish.

A duct kit designed to route a dryer's exhaust safely to the household vent system, restoring proper airflow and helping the dryer vent effectively when the original ducting is damaged or missing. What it does:

• Channels hot, lint-laden exhaust from the dryer to the exterior vent to reduce indoor heat and moisture.
• Replaces crushed, torn or disconnected ducting that can cause poor drying performance.
• Use when you notice longer dry times, excess heat or lint buildup near the dryer, or backdrafting from the vent.
• Helps maintain proper vent airflow when installed and secured per manufacturer and local code requirements.

• Disconnect electrical power (and gas supply for gas dryers) before installing or servicing venting components.
• Follow the appliance manufacturer's installation instructions and local building/venting codes for diameter, length and material.
• Avoid crushing, kinking or sharp bends in the duct; secure joints with approved clamps or foil tape and check for leaks.

Grease filter traps cooking oils and particles to protect blower components. Replace when clogged or damaged. Confirm fit with your hood model number.