Parts for Craftsman 358794944: Housing / Handle Parts

Gas-powered yard and garden machines require regular routine maintenance and care. When these machines develop problems, it can be difficult to determine the cause. When the engine on a blower seems to be struggling to operate or runs poorly, it may be a good idea to add a full gasket replacement to the maintenance routine. The gaskets will fit various parts of the engine and other systems and will keep the engine air tight and free of leaks. This replacement gasket set includes a full set of gaskets compatible with leaf blowers and other blowers made by Husqvarna, Poulan, Jonesred and Weed Eater. This is a set of OEM replacement parts that ships as a kit. It will require disassembly of the various engine parts and systems, but is often done with little more than screwdrivers and wrenches.

This replacement part is a throttle kit. It is a genuine replacement part made by Husqvarna. It is important that this part is able to be used properly so that the user is able to operate the machine effectively and efficiently. A new throttle kit might be needed if the current machine is having trouble starting up or is starting slow. This can be due to the throttle not being connected properly. It is true that the throttle can become worn down over time and it is recommended that it be replaced if this is the case. Be sure to reference the specific owner's manual for more details on how to install this part on the device. This part is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This part is a replacement carburetor adapter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective carburetor adapter in a variety of leaf blower models.The carburetor adapter connects the carburetor to the engine and thus is a critical equipment component. This part will need to be immediately replaced if broken, detached, or otherwise rendered ineffective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this input carburetor adapter, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this carburetor adapter is suitable for use on several different models of leaf blowers manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This certified OEM replacement part is a carburetor kit for a gas-powered leaf blower engine. For gas to ignite in an engine, there has to be the right amount of air in the system. Without oxygen, the spark won't light and the gasoline will not ignite. A carburetor is responsible for maintaining the right balance of air and gasoline. Therefore, without a properly functioning carburetor, the engine will also not function properly. Carburetors begin to break down over time because of built up exhaust and gunk in the engine. As this grime builds up, the carburetor cannot get enough air and the balance is thrown off. While carburetors can sometimes be cleaned, if it has become overly clogged or damaged, it will need to be replaced. Signs of a faulty carburetor include shakiness and black smoke, backfiring, hard starts, or an engine that will not start at all. Replacing a leaf blower's carburetor requires the crankcase line, primer line, fuel line, air filter, and throttle linkage to all be disconnected using pliers and a screwdriver. This part is intended for Craftsman, Poulan, Weed Eater, and Husqvarna leaf blowers and is sourced from the original manufacturer. It ships individually.

This certified OEM replacement part is a carburetor kit for a gas-powered leaf blower engine. For gas to ignite in an engine, there has to be the right amount of air in the system. Without oxygen, the spark won't light and the gasoline will not ignite. A carburetor is responsible for maintaining the right balance of air and gasoline. Therefore, without a properly functioning carburetor, the engine will also not function properly. Carburetors begin to break down over time because of built up exhaust and gunk in the engine. As this grime builds up, the carburetor cannot get enough air and the balance is thrown off. While carburetors can sometimes be cleaned, if it has become overly clogged or damaged, it will need to be replaced. Signs of a faulty carburetor include shakiness and black smoke, backfiring, hard starts, or an engine that will not start at all. Replacing a leaf blower's carburetor requires the crankcase line, primer line, fuel line, air filter, and throttle linkage to all be disconnected using pliers and a screwdriver. This part is intended for Craftsman, Poulan, Weed Eater, and Husqvarna leaf blowers and is sourced from the original manufacturer. It ships individually.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This knob is a genuine Husqvarna part. It is for use on a blower. The most common reason that a knob will need to be replaced is that the screw has been stripped from force or repeated use. The plastic knob handle may also become worn or damaged over time.Replacing this knob is very simple, but some safety precautions are necessary. Be sure to remove the wire and boot from the spark plug to prevent the appliance from starting accidentally. Be sure the fuel tank is empty. This knob is a genuine OEM part sourced directly from the manufacturer. This knob is compatible with several models of blowers, including Husqvarna, Poulan, and Weedeater. It may be compatible with blowers manufactured by AYP, Craftsman, Jonsered, McCulloch, and RedMax. Use the compatibility checker to find out. It also replaces obsolete part number 530049485.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.