Huskee / Husky Edger Parts

This OEM part is a depth cable for lawnmowers. Also known as a stop cable, the depth cable is the cord that stops the blades from running when the mower is in an idle position. If the lever has been released and the blades are still rotating, this might mean that the depth cable is no longer functioning and needs to be replaced. Luckily replacing the depth cable is a relatively simple fix. To replace the depth cable, begin by removing the bracket that holds the cable to the handle by using a screwdriver to pry it off. On the lower part of the handle, there is a clip that secures the cable. Remove the clip and disconnect the end of the cable near the kill handle. Locate the brackets connected to the engine. Remove the plastic tabs securing the cable housing with a pair of needle-nose pliers and pull the housing away from the bracket. Set the old cable aside and reinstall the new cable in reverse order. This genuine replacement part is sold individually and is compatible with MTD brand lawnmowers.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.

This non-vented primer assembly is a replacement part that can work with a range of lawn and garden equipment. This assembly features the push-bulb that is used to create a vacuum that draws fuel into the carburetor, so it can help to start the engine. If the primer assembly is damaged, it will not create a vacuum to pull the fuel from the tank. This can result in equipment that does not start.The primer assembly is made from plastic and rubber. Although it is built to last, it can wear down. The bulb might crack, or it might not connect correctly, for example. If there are any issues with the primer assembly, the part should be replaced right away.The non-vented primer assembly will work with select models of trimmer and mower from Yard Machines, Husky, Troy-Bilt, and MTD. This assembly is sold individually. It is an authentic part that has been sourced from the OEM.

This spark arrestor is a genuine MTD part. It is a replacement part for lawn mowers, log splitters, and walk-behind mowers. The spark arrestor is an important safety feature, and it is illegal to sell or operate a machine without one.This part arrests or extinguishes sparks that are created by the engine and other components while the mower is in use. It prevents fires, and mowers should never be used without one.This spark arrestor is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, MasterCut, Bolens, Cub Cadet, Husky, MTD, Troy-Bilt, and Yard-Man.

This is a muffler assembly that is used with many types of lawn and garden equipment from major manufacturers. The part is connected to the exhaust tube and is tasked with reducing the noise made by the exhaust. As time goes on, the muffler assembly can start to become damaged or malfunction and may need to be replaced. When replacing the muffler assembly, make sure the spark plug is removed and the equipment is powered off. It should be placed on a stable surface during the replacement process. Take the bolts out of the muffler and remove them from the engine. Take the bolts from earlier and install them into the replacement muffler. Install the gaskets, heat shield, and other parts before placing the new muffler into the lawn equipment. Reassemble all parts before using the tool.The muffler assembly is an authentic OEM replacement part that is directly sourced from the manufacturer. It is made to be used with lawnmowers, tillers, leaf blowers, log splitters, and wood chippers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, MTD, and Yard Machines. This component is sold as an individual item.

This carbon canister filter can be used to replace old filters that are no longer functioning properly. Carbon canister filters need to be replaced regularly in order to ensure outdoor power equipment runs efficiently. Filters are essential for keeping dirt, debris, and harmful materials from ruining an engine. Without carbon canisters, outdoor power equipment can experience decreased fuel efficiency whilst also contaminating the air with more pollutants from the engine. While an engine is running and even after it has been turned off, fuel vapors rise from the fuel tank and pollute the air. Carbon canisters are essential for trapping these vapors and preventing them from being released. Without a clean, well-functioning filter, carbon canisters cannot work efficiently.This carbon canister filter is a genuine replacement part sourced directly from the manufacturer. This replacement carbon canister filter fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

This replacement part is a flywheel. This is a genuine replacement part made by MTD. This part is found inside many different engines and is responsible for rotating to help the engine run smoothly and effectively during use. A new flywheel might be needed if the current one is missing or damaged in any way. This part can become stripped or worn down over time and it is recommended that it be replaced if this is the case. If the wheel has moved off its track, a repair might be possible. Be sure that the engine is completely shut down before replacing this part. Refer to the appropriate user guide for more information on how to begin. This flywheel is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This brake assembly is a genuine MTD part, sold individually. This brake assembly can be used as a replacement part in lawnmowers, string trimmers, and edgers. This assembly contains all of the parts needed to replace the brakes in one of these pieces of equipment.If the brake is slow to respond or does not respond to user input at all, the brake assembly should be ordered as a genuine OEM replacement part. Refer to the manual for proper installation instructions.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This brake assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Craftsman.

This ignition coil assembly is a genuine MTD part, sold individually. This ignition coil assembly can be used as a replacement part for lawn mowers and string trimmers. This ignition coil assembly comes with all of the necessary components required to facilitate a complete replacement or a new installation of the part. The purpose of the ignition coil is to transmit the voltage from the battery of the appliance to ignite a spark in the spark plugs such that the engine can be powered on.If the ignition coil is not igniting the spark plugs and powering on the engine, it is likely that the component has suffered damage and will need to be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition coil assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, and Yard Man.

Governor springs are critical to maintaining the speed of outdoor power equipment such as lawn mowers. They are important for keeping speed steady regardless of how hard the engine is working. Governor springs sense changes in the workload of outdoor power equipment and adjust the throttle for the operator. For example, when mowing a lawn, long grass or steep areas can influence the engine load. Without a governor spring, the mower would not maintain a steady speed and the throttle would need to be manually adjusted.This governor spring is a genuine OEM part that has been sourced directly from the manufacturer. This replacement governor spring fits a number of different types of outdoor power equipment including lawnmowers, trimmers, and chipper shredders. It is suitable for various Cub Cadet, MTD, Craftsman, and Troy-Bilt models. Please note these governor springs are genuine manufacturer parts and are sold individually.

This crankcase cover gasket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, and log splitters. It is the component responsible for sealing the crankcase of the engine and protecting it from accumulating dirt and debris from the outside and from leaking oil from the inside.When damaged, crankcase cover gaskets can hamper their ability to seal the crankcase, thereby letting in dirt and debris or letting out engine oil. Look for cracks, tears, punctures, piercings, or erosion of the metal material. If the crankcase cover gasket is compromised, it must be removed and replaced immediately before the appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This crankcase cover gasket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This is a muffler gasket that is located between the engine exhaust and the exhaust system in various types of lawn and garden equipment. When the muffler gasket is in good shape, it prevents exhaust from leaking out of the tool. It comes with a substantial amount of flexibility so that it can expand in the presence of heat. The main task of the muffler gasket is to prevent leaking. If the gasket is damaged or broken, the exhaust may leak from the joint.A muffler gasket can fail due to many situations. It can dry out, lose its flexibility, or develop cracks or holes. Sometimes the muffler gasket will chafe and lose its resistance to heat so it dries out. Muffler gaskets can also tear due to the intense vibrations from equipment. The gasket will need to be replaced by taking out the engine and switching the muffler gasket for a new one.This is a genuine OEM replacement muffler gasket that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used in lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This genuine replacement part is a muffler assembly for use with a lawn mower. The muffler is an essential part for the safe and reliable operation of a lawn mower. A muffler can help minimize the sound of the lawn mower engine. Additionally, it can help prevent exhaust sparks from exiting the mower and igniting dry grass, leaves, or debris. It can also help improve fuel economy of the mower. The main signs that a muffler may need to be replaced are a change in operating volume, lower fuel economy, or a bad odor during operation. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair. Perform repairs only in a well ventilated area.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt, and more lawn mowers. Please note: original part number 751-14429 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a genuine OEM intake valve that serves as a replacement for select lawn mowers from MTD. The intake valve is an engine component that is used to control the flow of air into the engine. When the valve is open, the flow is permitted. The valve closes to stop the flow. The valve can sometimes become stuck, damaged, warped, or get lost and result in the need for a replacement. Without a proper intake valve, the engine will not be able to operate as it should because it cannot regulate the amount of air and fuel coming in. This OEM intake valve is manufactured to exact specifications and designed as an exact fit for compatible machines. It will resolve any issues with engine operation and ensure that the proper amount of air gets into allow the engine to operate properly. This intake valve is sold as an individual replacement part. Be sure to allow the engine to cool completely and disconnect the spark plug before doing any repairs. Wear gloves for hand protection and always use the correct tools when working on the engine.

This replacement part is an exhaust valve. Exhaust valves expel smoke and gases produced while the engine is running. This part makes it easier to ensure that the fumes are being directed away from the user. A new exhaust valve might be needed if the current one has been damaged in any way. This can include being dented, bent, clogged, or cracked, causing exhaust to build up or be directed toward the user. Wear work gloves when completing this repair.This is a genuine OEM replacement part manufactured by MTD. It is sold individually.