Huskee / Husky Tractor

This casing clamp is a genuine MTD part, sold individually. This casing clamp can be used as a replacement part in lawn mowers, snowblowers, and tillers. The purpose of a casing clamp for one of these outdoor appliances is to affix the governor control plate to the tank assembly so that it remains stably placed throughout the standard operation of the appliance.If the casing clamp is subject to damage in the form of puncturing, denting, cracking, warping, or eroding over time, it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This casing clamp is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Bolens, and MasterCut.

This replacement part is a transmission kit. This is a genuine replacement part made by MTD. This kit is used to assist the transmission and allow it to work properly while the engine is in use. A new transmission kit might be needed if the engine is no longer starting as efficiently as before. This can be due to a worn down transmission and should be replaced as soon as possible. The transmission is a frequently used part in a machine and can easily become damaged after years of normal use. Be sure the engine is cooled off and shut down before attempting to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Complete deck skirt kit for 42-inch mower decks. Replaces cracked, broken, or missing skirts to protect the deck perimeter and contain grass clippings.

If your lawn tractor won't move or the mower deck won't engage, a damaged engine pulley may be the cause. This crankshaft pulley drives the belt system.

This part is an engine pulley that is used on lawnmowers and lawn tractors. This engine pulley is often referred to as a serpentine belt. This belt aids in powering peripheral devices within the engine compartment, such as power steering.A new engine pulley may be needed if the belt is broken or torn upon a quick visual inspection. The operator may notice that there are squealing sounds coming from the lawnmower or lawn tractor if the pulley is beginning the fail. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This engine pulley is a genuine MTD part. It is sold individually. This particular engine pulley is compatible with lawnmowers and lawn tractors that are manufactured by MTD, Yard-Man, Cub Cadet, Husky, and Yard Machines.

Idler pulley roller guides and tensions mower deck belts. Replace if worn, cracked, or causing belt slippage. Verify fit with your model number.

Replace a worn engine pulley causing belt slippage, poor blade engagement, or loss of drive power on your lawn tractor. Direct-fit replacement part.

Replace your cracked, worn, or broken lawn tractor seat. Mounts to the tractor frame to provide a comfortable seating surface for the operator.

This is a ferrule that can be used as a replacement part for repairing or adjusting compatible mowers. A ferrule is a fastener that can be used to join two pieces together and is typically connected with a cotter pin. It can be found in latch assemblies and variable speed pulley brackets. It is not to be confused with wire ferrules that are crimp wires.If this part becomes damaged or corroded, it should be replaced. The replacement process is simple. Wear gloves for safety. Make sure that the mower is off and cool before starting a replacement.The ferrule is for use with some models of mowers from MTD, Ryobi, Yard-Man, Troy-Bilt, Husky, Bolens, and Yard Machines. The piece is sold individually and is a genuine OEM replacement part.

This replacement part is a drive shaft assembly intended for use in lawn mowers. This is a genuine replacement part made by MTD. Drive shaft assemblies are an important part of all lawn mowers. This part is responsible for rotating the cutting blades on the appliance so that the user is able cut grass effectively and efficiently. A new drive shaft assembly might be needed if the user notices that the cutting blade is no longer turning, or is unable to start. If the cutting blade stops turning in the middle of using the appliance, the drive shaft might need replacing. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. Working gloves will be needed as this part is close to sharp blades.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

Hex nuts are a common type of nut used with bolts, anchors, studs, and screws. These nuts are often present in lawn and garden equipment like lawnmowers. A hex nut has a hexagonal shape with machine screw threads and can be used with lock washers. Hex nuts are made of durable metal but can become damaged, corroded, or even break over time.Visually inspecting the hex nuts on lawn equipment will provide information about whether it's damaged or broken. This might be seen as a dent, a misshapen nut, or a nut that has broken in half. If these things are present, the hex nut will need to be replaced. Remove the hex nut using a socket wrench and socket and then place a new one on the machine. Once it has been situated, tighten the nut so it holds the other parts stable before using the machine.This hex nut is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual component. The part can be used in lawnmowers, log splitters, snowblowers, tillers, and string trimmers made by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

Secures hardware, handles, and connections on lawn equipment. Replace if stripped, corroded, or missing. Standard hex nut for various outdoor models.

This is a genuine 5/16 hex nut, a standard piece of hardware used to affix various components securely. This MTD nut is used in multiple applications and has several placement options depending on the model of the engine. Nuts can become stripped or worn over time. In some cases, the screws they are attached to may become stripped, which might require a replacement of both. A wrench is required to complete the replacement. This hex nut is designed to work with several brands that feature MTD engines, including RYOBI, Yard Machines, Yard-Man, MTD, Troy-Bilt, Husky, Bolens, and Cub Cadet. There are hundreds of machines that use this nut, including tractors, lawnmowers, blowers, cultivators, and snowblowers. This nut is sold individually; purchase additional parts as necessary.