Huskee / Husky Tractor

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This part is a replacement muffler. This part can be used to replace a broken or defective muffler in lawn tractorsThe muffler ensures that there isn't excessive noise emitted by the engine's exhaust during use. If the user notices the equipment is very noisy to operate, the muffler may be broken and will require replacement with a genuine OEM part. When working on or near an engine, it is important to ensure that it is powered off and completely cool before beginning any repairs.As an authentic replacement part from MTD, this muffler is suitable for use on lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and some other brands. This is a genuine OEM part made of high-quality, durable materials and is sold individually.

This replacement part is a push rod kit. It is a genuine replacement part made by MTD. Push rods are usually found in different types of lawnmowers. These long rods are responsible for pressing open the cylinder valves within the engine A new push rod kit might be needed if the performance of the engine is off. This can mean that the rods are damaged in some way that is affecting the motion and therefore not opening the cylinder valves. Be sure the engine is completely powered off before attempting this repair. The user should also wear working gloves to prevent injury while working close to the engine. This push rod kit is sold individually and is a genuine OEM replacement part. This part is sourced directly from the manufacturer to ensure proper fit and performance.

The fuel drain plug gasket creates a solid, leak-proof seal in the fuel drain. The gasket goes into the connection between the drain and the fuel tank. In the event that this gasket fails, there could be fuel leakage from the equipment that could be costly or even dangerous. Make sure to inspect and replace all gaskets regularly to ensure that the engine is working efficiently. This gasket is made of durable rubber material and is simple to install. drain the fuel to provide access to the drain plug and the fuel line without spilling fuel everywhere. Always wear gloves and make sure to disconnect the spark plug or disable the engine before working on any outdoor power equipment. This OEM replacement fuel drain plug is compatible with several tillers, snowblowers, lawnmowers, tractors, and other outdoor power equipment made by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut. Sold individually.

This oil seal is a genuine MTD part, sold individually. This oil seal can be used as a replacement part in a lawn mower or a snowblower. The purpose of the oil seal in a lawn mower or a snowblower is to seal off the area around the sump of the engine, preventing possible oil leaks.The oil seal in a lawn mower or a snowblower might have to be replaced if it can no longer effectively prevent oil leaks. If there are oil leaks stemming from the area of a damaged oil seal or if external materials are easily passing through the oil seal into the inner machinery of the lawn mower or snowblower, the oil seal should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil seal is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This replacement part is a flywheel. This is a genuine replacement part made by MTD. This part is common in most machinery and works near the engine. The flywheel is able to convert certain types of energy and inertia to ensure that the engine is running smoothly during use.A new flywheel might be needed if the current one is missing or damaged. It is possible that after years of use, the flywheel might not work as effectively as in prior uses. If this is the case it recommended that it be replaced. Be sure the engine is completely turned off before replacing this part to prevent injury and maintain safety. This flywheel is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a replacement alternator. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a malfunctioning or faulty alternator on various lawnmower models and small engine power equipment. The alternator supplies power to the engine that helps to recharge the battery. If the alternator is defective in some way, the battery may not charge, and the equipment won't start. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part. For more accurate information on how and where to install this alternator, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this alternator is suitable for use on several different lawnmower models and small engine power equipment manufactured by MTD, Cub Cadet, Yard Machines, Troy-Bilt, Yard Man, and Husky. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This crankcase cover gasket is a genuine MTD part, sold individually. This crankcase cover gasket can be used as a replacement part for a lawn mower. The purpose of the crankcase cover gasket is to seal off the crankcase from possible oil leakages as well as from the accumulation of debris that could seep into the machinery.The crankcase cover gasket might have to be replaced if it is damaged to the point that materials can leak in or out of the crankcase. If the gasket has been punctured, cracked, warped, eroded, or knocked out of its secure position and cannot be fixed by a simple repair, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This crankcase cover gasket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Huskee.

This replacement part is a regulator bracket. It is a genuine replacement part made by MTD. Regulators are found in many appliances and machines that operate similarly to cars. This regular controls the voltage within the lawnmower so that the correct amount of charge is going back into the battery while the engine is still running. A new regulator bracket might be needed if the battery on the appliance is no longer working. This can mean the regulator is not doing its job and providing proper charge to the battery over time. Be sure the engine is powered off and cooled down before attempting to replace this part. It is also recommended that working gloves be used to prevent injury. This part is sold individually and is sourced directly from the manufacturer. This is also an OEM replacement part to ensure long-lasting use.

This part is a replacement air filter cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a broken or defective air filter cover in outdoor power equipment. The air filter cover is important for keeping debris, dirt, and contaminants out of the equipment's air filter. If the air filter is exposed to contaminants, it can become clogged or damaged, preventing it from properly filtering air. Thus, if the cover is in poor condition, it should be replaced. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the the installation of this particular air filter cover, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality plastic. This air filter cover can be used with a variety of different small engine outdoor power equipment models manufactured by Craftsman, MTD, and other brands.

This is a carburetor mounting stud for use with various lawn tractors. The carburetor plays a vital role in the performance of an engine, and it needs to be affixed securely to the correct location. The carburetor mounting stud fits onto the engine block and attaches the carburetor to the engine securely. If there is a problem with the mounting stud, it could cause problems with the carburetor.Although this is a simple piece and made from quality metal, there is still a chance that it might need to be replaced at some point. Corrosion or other damage could cause problems with the piece. When owners install the new stud, they should do so in a well-ventilated area. They should also drain the fuel tank and disconnect the spark plug wire before they start the repair.The carburetor mounting stud works on certain models of lawn tractors from Troy-Bilt, MTD, Cub Cadet, Yard-Man, Yard Machines, and Husky. This piece is sold individually, and it is a genuine OEM replacement part that has been sourced from the manufacturer.

This part is a replacement exhaust pipe gasket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a worn, broken, or defective exhaust pipe gasket in a variety of lawn and power equipment engine models. This particular gasket forms a seal in between the muffler and the cylinder head. Gaskets can become easily worn and brittle over time, which can cause them to crack, break, or work insufficiently. At this point, gaskets should be replaced in order to ensure proper equipment function. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Allow the equipment to cool down completely before attempting to install this gasket. For more accurate information on how and where to install this exhaust pipe gasket, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this exhaust pipe gasket is suitable for use on several different models of lawn tractors and small engine outdoor power equipment manufactured by MTD, Troy-Bilt, Yard Machines, Husky, Yard Man, and Cub Cadet. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a replacement cylinder head gasket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a worn-out or defective cylinder head gasket on various lawnmower models. The cylinder head gasket seals the cylinder and prevents oil from leaking into it. Over time, gaskets become brittle and worn, which can allow damaging leaks to occur. Gaskets should be replaced regularly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this cylinder head gasket, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this cylinder head gasket is suitable for use on several different lawnmower models and lawn tractors manufactured by Craftsman, Cub Cadet, Yard Machines, Husky, and MTD. This is a genuine part made of high-quality, durable materials and is sold individually.

This connecting rod assembly is part of the piston engine that connects the piston to the crankshaft and works to rotate the crankshaft. If the connecting rod breaks or is damaged, the engine will not run. If the engine is making loud noises, has low oil pressure, or is using a lot of oil, the connecting rod should be inspected as it may be failing. If the connecting rod breaks during engine operation, the engine could be severely damaged by the rod jamming itself in the cylinder. Replace the connecting rod at the first sign of damage. This repair requires removing the engine. Make sure the engine is cool, and the mower is on a flat surface. Wear work gloves and safety goggles when repairing the mower. Use the diagram to remove the engine and locate the connecting rod assembly. Remove and replace the damaged rod. Inspect all parts as the mower is put back together. This connecting rod assembly is sold as an individual part. It is designed for use in lawnmowers and lawn tractors manufactured by MTD, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.