Huskee / Husky Tractor

This idler arm spacer is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn tractors. The idler arm spacer attaches to the idler arm and creates a smooth surface for the idler arm to be able to move smoothly back and forth when in operation. The idler arm is part of the system that holds tension on the pulley and adjusts the belt. If the spacer is worn or missing, it will need to be replaced to keep the machine functioning efficiently. Before replacing the idler arm spacer, make sure the key is out of the ignition and that the spark plug is removed. Remove the deck belt and if necessary to access the idler arm, remove the deck. Remove the fasteners holding the idler arm in place and locate the spacer. Remove the spacer. Align the new idler arm spacer and place the idler arm back in place. Reassemble the deck and insert the spark plug.This idler arm spacer is a heavy-duty metal part that is individually sold. It is designed for use in lawnmowers and tractors manufactured by Craftsman, Murray, and MTD.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part for a lawn mower. The purpose of the spacer is to serve as part of a fastening mechanism so, when integrated into a system of nuts, bolts, screws, and washers, the spacer can separate the fastening components from one another to reduce friction and create the desired amount of space.The spacer is a small part that can be easily lost or misplaced within the standard lifespan of a lawn mower without necessarily causing any changes as a result of its absence. Still, if a spacer is found to be missing, a replacement should be ordered. Additionally, a spacer can be stripped over time and if this is the case upon visual inspection, this genuine OEM replacement part should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor appliance brands: MTD and Craftsman.

This part is a replacement gas gauge. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current gas gauge is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The gas gauge both measures the amount of fuel residing in the tank and seals the fill spout of the fuel tank. This ensures that no dirt, debris, or contaminants can enter the tank and pollute the fuel supply. It also prevents fuel from spilling out. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this gas gauge, the appropriate owner's manual and equipment diagrams should be referred to. This gas gauge is suitable for use on a variety of lawn tractor models manufactured by MTD, Troy-Bilt, Yard Man, Bolens, Cub Cadet, Husky, and Yard Machines. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This part is a PTO handle and deck engage cable service kit that is used on lawn tractors. This includes the entire PTO handle and deck cable assembly, which is the component that engages the mowing deck.A new PTO handle and deck engage cable service kit will be needed if any component of this system is cracked, broken, or damaged in any way. This could be due to tears, holes, or general erosion of the parts over time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This PTO handle and deck engage cable service kit is a genuine MTD part. It is sold individually. This particular PTO handle and deck engage cable service kit is compatible with lawn tractors that are manufactured by MTD, Yard Machines, Husky, Murray, and Troy-Bilt.

This part is a replacement label. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a lost or unreadable label in a variety of lawn tractor models.Labels are essential for correct and safe use of the equipment and thus need to be kept in good condition. Labels should be replaced if illegible. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this label, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this label is suitable for use on tillers manufactured by MTD, Craftsman, Troy-Bilt and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This chute bracket is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn mowers and lawn tractors to hold the discharge chute in place on the machine. The discharge chute directs the grass trimmings and debris out from under the lawnmower so that there is no buildup underneath the machine. If the bracket holding the discharge chute becomes loose, it may fall off during use, and the chute would then fall off the machine. Over time, the mower's vibrations may cause the screws holding the bracket to loosen and then come out, causing the bracket to fall off. If the bracket is missing, it should be replaced to ensure the discharge chute stays attached.Routine inspection of screws and nuts on the mower can prevent the bracket from falling off the machine. When replacing the bracket, make sure to keep the screws used to attach it to the lawnmower and reuse them to install the one. Make sure the screws are secure but not overtightened.This chute bracket is a metal part that is individually sold. It does not include fastening hardware. This bracket is designed for use on lawn mowers and lawn tractors manufactured by Troy-Bilt, Yard Machines, Yard Man, and MTD.

This is a metal belt cover. Designed for lawn tractors and lawn mowers, this part connects to the deck and serves to shelter and house the mandrel pulley assembly and belt. Without this cover, the belt and assembly could become compromised from dirt and debris and the lawn mower would cease to function. The cover is made of metal and when exposed to natural elements it is susceptible to corrosion and chemical degradation over time. It is also possible for it to become damaged accidentally if struck by a heavy object.The belt cover is relatively easy to install. The only tools required will be a wrench set. First, unfasten the nuts and bolts securing the old one in place. Then remove the old one from the mower and fasten the new one in its place.This is a genuine replacement belt cover and it is sold separately. The cover is designed to work with Husky, MTD, Yard Man, and Yard Machines models.

This drag link is a genuine MTD part, sold individually. This drag link can be used as a replacement part in a lawnmower. The purpose of a drag link, also known as a steering arm, in a lawnmower is to affix the steering wheel and the shaft to the front tires of the appliance for ease in steering the lawnmower while in operation.The drag link in a lawnmower might need to be replaced at some point within the typical lifespan of the appliance; this can occur if the lawnmower is difficult to steer in a way that is directly attributable to the drag link, which could be due to damage to the component. Damage can take the form of puncturing, warping, denting, cracking, or eroding, and if the damage precludes the function of the drag link, the drag link should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This drag link is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Machines.

This regulator is a genuine MTD part. It is a replacement part for lawn tractor engines. The regulator, or voltage regulator, prevents the battery from overcharging and therefore extends its life. It works similarly to an alternator in a vehicle engine. It is important for running battery-operated components of a mower or tractor, such as headlights.One sign that the regulator may need to be replaced is if the battery is unable to hold a charge and dies quickly. The regulator can be tested using cables and a voltmeter.This regulator is a genuine OEM part sourced directly from the manufacturer and is sold individually. It is compatible with mowers and tractors manufactured by Columbia, Cub Cadet, Huskee, Husky, MTD, and Troy-Bilt.

This axle is a genuine MTD part. It is a front left-hand axle made for lawn tractors and riding mowers. It is located on the front left side of the tractor. Wear and tear to the axles is expected over time, especially on the front axles.This axle is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Lawn tractors typically have more than one axle. If one of them is worn, check the others and buy appropriate replacements.This particular axle is compatible with many makes and models of lawn tractors, including several manufactured by Bolens, Brute, Columbia, Craftsman, Huskee, Husky, MasterCut, MTD Gold, Murray, White Outdoor, Yard Machines, and Yard-Man. Since it works with so many models, the easiest way to check is by using the parts compatibility checker. This manufacturer also replaced obsolete part number 938-04014 with this axle.

This piston ring set is a genuine MTD part, sold individually. This piston ring set can be used as a replacement part for a lawn mower. The purpose of the piston ring set is to serve as a replacement for one or more piston rings for a lawn mower; the purpose of a piston ring is to seal the cylinder so the fuel that is combusted by the small engine does not leak into the area of the cylinder or the piston.The piston ring set might have to be ordered as a replacement part if one or more piston rings suffer from damage. If a piston ring is scraped, punctured, eroded, or warped to the point that oil can leak out of the seal, the piston ring set should be ordered as a genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This piston ring set is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

This piston pin snap ring is a genuine MTD part, sold individually. This piston pin snap ring can be used as a replacement part in a lawn mower or a snowblower. This part stabilizes the pistons within the equipment's engine.The piston pin snap ring might be subject to damage within the standard lifespan of a lawn mower or a snowblower. This could occur in the form of puncturing, tearing, ripping, denting, cracking, or eroding, and if the damage is severe enough to preclude the piston pin snap ring from keeping its fastened components in place, the piston pin snap ring should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This piston pin snap ring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This replacement part is an intake valve seal. It is a genuine replacement part made by MTD. This intake valve seal is able to close the valve in the machine or appliance so that air of fuel cannot escape during use. This part is essential to the overall operation of the machine. A new intake valve seal might be needed if the current one is allowing for air or fuel to escape during use. This can cause additional problems within the machine in general. Be sure the engine is completely powered off and cooled down before attempting to replace this part. Reference the appropriate user manual for more information. This is a genuine OEM replacement part. This intake valve seal is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This is a muffler stud assembly that is used as a replacement piece on lawn tractors. Studs can be used on the exhaust system of lawn tractors to provide some additional protection to the other parts of the machine while keeping the exhaust in place. If the studs are damaged, they will need to be replaced to ensure the exhaust system is protected.The studs, sometimes called muffler bolts, may need to be replaced if they become corroded or damaged. Although they are made from durable material, there is a slight risk that they could become damaged over time. Replacement is fast and easy, so owners should be able to handle it on their own with minimal tools.This muffler stud assembly works for select models of lawn tractors from brands like MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt. The assembly is sold individually. It is an OEM part that has been sourced from the manufacturer.