Husqvarna Chainsaw Transmission, Brake & Clutch

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.

The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.

This replacement part is a brake arm. It is a genuine replacement part made by Husqvarna. This brake arm is commonly found in different types of lawnmowers and allows the user to control the brake settings. This is an extremely important part of the lawnmower.A new brake arm might be needed if the current one is no longer connected to the machine. If the brake arm is damaged in any way, it might be difficult to operate the machine appropriately. If this is the case, it is recommended that the current part be replaced immediately. Be sure to wear working gloves during this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is meant to fit different lawnmowers.

This part is a clutch kit that is used for lawnmowers and lawn tractors. A clutch is a safety device that makes the blade stop spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch kit may be needed if the lawn tractor or lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch kit is a genuine Husqvarna part. It is sold individually. This particular clutch kit is compatible with lawnmowers and lawn tractors that are manufactured by the Husqvarna and Poulan brands.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.

This genuine Husqvarna brake band can be used as a replacement part for chainsaws. The brake band is affixed to the clutch drum of the chainsaw. Its purpose is to tighten, when pressed, around the clutch drum in order to temporarily stop the clutch drum from rotating.A brake band might have to be replaced within the standard lifespan of a chainsaw. A brake band can suffer damage if it is pressed to engage while the chainsaw continues to run; this can cause the engine to overheat, stall, or misfire. Additionally, the brake band can wear out over time and lose its functionality; wear and tear can come in the form of loosening parts, erosion to the metal material, or punctures that prevent it from tightening around the clutch drum. If this occurs, the brake band should be replaced with this OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This brake band is compatible with Husqvarna brand chainsaws.