Husqvarna Transmission, Brake & Clutch

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.

This part is a replacement transmission gear. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective or broken transmission gear in lawn mowers.The transmission gear is what attaches to the equipment's drive shaft to help turn the wheels. This part is critical to proper equipment functionality and thus will require replacement if faulty in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this transmission gear, the appropriate owner's manual and equipment diagrams should be referred to. This transmission gear is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawn mower models that have been manufactured by Husqvarna, Poulan, and other brands.

The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.

This is a genuine OEM clutch assembly sourced directly from the manufacturer; it is used in lawn mowers and lawn tractors to engage the blades. When the gear lever is pulled, the clutch engages. This causes the pulley wheel to spring out and tighten the blades against the turning drive shaft pulley, which then causes the blades to spin. If the clutch assembly is not working correctly, the blades will not move to cut the lawn. If the blades will not engage or if they are stuck and won't disengage, the clutch assembly should be replaced. This can occur if the clutch assembly overheats. Excessive use and normal wear and tear can also be the cause of a bad clutch. Before working on the clutch assembly, make sure the engine has had time to cool off to prevent burns. Remove the fuel from the fuel tank and fuel lines. Remove the spark plug to prevent accidental engine starting. Park the machine on a flat surface and chock the wheels to prevent rolling. Remove and replace the clutch assembly, then reinstall all parts and fuel. Check the clutch after replacement to ensure it is working properly.This clutch assembly is sold as an individual unit. It is compatible with lawn tractors and tractors manufactured by Craftsman, Husqvarna, and Poulan.

KIT.TRACTOR CLUTCH.OG.1.125"

This replacement part is a brake arm. It is a genuine replacement part made by Husqvarna. This brake arm is commonly found in different types of lawnmowers and allows the user to control the brake settings. This is an extremely important part of the lawnmower.A new brake arm might be needed if the current one is no longer connected to the machine. If the brake arm is damaged in any way, it might be difficult to operate the machine appropriately. If this is the case, it is recommended that the current part be replaced immediately. Be sure to wear working gloves during this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is meant to fit different lawnmowers.

This part is a clutch kit that is used for lawnmowers and lawn tractors. A clutch is a safety device that makes the blade stop spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch kit may be needed if the lawn tractor or lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch kit is a genuine Husqvarna part. It is sold individually. This particular clutch kit is compatible with lawnmowers and lawn tractors that are manufactured by the Husqvarna and Poulan brands.

This is a rubber wheel ring that attaches to the wheel hub. Rubber wheel rings are also often called friction rings. The rubber wheel ring/friction ring meshes with the friction disc. This is what causes the drive wheel axle to turn. This is an integral part of the wheel movement.A new rubber wheel ring may be needed if the existing part is visibly damaged. The operator may also notice a grinding noise when the rubber wheel ring is starting to go bad. This may need to be replaced over time after normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This rubber wheel ring is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This rubber wheel ring is compatible with snowblowers manufactured by Husqvarna, Poulan, and Jonsered.

This is a transmission designed for use with lawn mowers with a self-propel feature. The transmission is used to take power in the engine and move it to the wheels. It also controls the torque to manage the lawn mower's speed based on current conditions. If the transmission is damaged or worn, the pulley may continue spinning while the wheels refuse to turn.Several tools are needed for the replacement, including pliers, a drill, a nut driver, a socket wrench set, and work gloves. First, make sure the spark plug wire is disconnected. Remove the fuel tank cover, place a bag over the opening, and replace the cap. Remove the driver cover before releasing the ground drive belt from the pulley. Release the drive control cable from the post and take off the front wheels. Access and remove the transmission. Install the new part in the same location and reassemble.This is an authentic OEM Husqvarna transmission that is sold on an individual basis. It is compatible with lawn mowers and lawn tractors made by Husqvarna and Craftsman. The part comes with all needed axles and gears.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.

This genuine Husqvarna brake band can be used as a replacement part for chainsaws. The brake band is affixed to the clutch drum of the chainsaw. Its purpose is to tighten, when pressed, around the clutch drum in order to temporarily stop the clutch drum from rotating.A brake band might have to be replaced within the standard lifespan of a chainsaw. A brake band can suffer damage if it is pressed to engage while the chainsaw continues to run; this can cause the engine to overheat, stall, or misfire. Additionally, the brake band can wear out over time and lose its functionality; wear and tear can come in the form of loosening parts, erosion to the metal material, or punctures that prevent it from tightening around the clutch drum. If this occurs, the brake band should be replaced with this OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This brake band is compatible with Husqvarna brand chainsaws.