Husqvarna Edger Parts

Replacement throttle control cable assembly for gas line trimmers. Installs between trigger and engine. Needed when cable is frayed, broken, or kinked.

If your trimmer pull cord won't retract or feels loose, this rewind spring restores tension to the starter assembly. Essential for reliable starts.

Piston ring seals the gap between piston and cylinder wall in small engine equipment. Replace if worn, cracked, or causing compression loss.

Seals the fuel line where it passes through the chainsaw fuel tank. Replace if cracked, worn, or leaking to prevent fuel seepage and maintain proper seal.

Cleans fuel before it enters the carburetor, catching dirt and debris. Replace when clogged to restore peak engine performance and prevent starting issues.

Replacement edger blade for lawn edgers that trim grass along sidewalks and driveways. Replace if blade is bent, chipped, or worn from pavement contact.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

This genuine Husqvarna muffler for string trimmers and edgers is a necessary component for reducing noise from the equipment. While these machines might work without mufflers, they would be much louder. The muffler also prevents sparks from coming through and starting fires. This is particularly important when working with grass, leaves, and other dry debris.If the muffler is clogged, cracked, or broken, the engine on the equipment might not perform as it should. Clogs can occur over time due to the use and buildup of debris. Cracks and breakage are a normal part of wear and tear and would be easy to find during routine maintenance. Inspect for rust, cracks, breaks, and damage.Removal and replacement is a simple process using a screwdriver to remove the engine cover. Set the cover aside. Next, remove the bolts holding the old muffler in place. Remove the old muffler and discard. Wipe down the area while the muffler is off the equipment. This will prevent debris from interfering with the installation. Install the new muffler with the bolts included. Tighten the bolts but do not overtighten. Reinstall the engine cover and tighten the bolts. This muffler is compatible with Husqvarna trimmers. It is sold individually and comes with bolts.

Replacement mounting screw for chainsaws and outdoor power equipment. Secures components and covers. Replace if stripped, missing, or damaged during repair.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

Air filter housing for gas line trimmers. Protects and secures the air filter during operation. Replace if cracked or damaged to maintain proper filtration.