Husqvarna Tiller Parts

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This bearing is a genuine MTD part, sold individually. This bearing can be used as a replacement part in a lawn mower or a tiller. The purpose of the bearing in a lawn mower or a tiller is to facilitate the proper rotation of a component while also eliminating undue friction between the component and its associated parts.The bearing in a lawn mower or a tiller might have to be completely replaced at some point within the standard lifespan of the appliance. This could occur if the bearing is damaged in the form of puncturing, denting, cracking, warping, or eroding. It is a simple replacement process that will require only basic tools to execute.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bearing is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This needle bearing is a genuine OEM replacement part directly sourced from the manufacturer. These bearings are designed for use in tillers, lawnmowers, and other outdoor power equipment with rotating parts. The needle bearings reduce the friction created between those parts. Regular use can cause wear and tear on the bearings. Usually, a squealing or grinding noise will be audible before the part has completely failed. This is a good sign that the needle bearing needs to be replaced. If the bearing completely fails, the parts involved may seize and cause further damage to the equipment or its parts. Routinely lubricating the bearings will help reduce the chances of failure.The needle bearing is used in many applications. On a rototiller, the roller bearing is located on the input shaft. If this roller bearing fails, the input shaft can break and have to be replaced along with the needle bearing. Needle-nose pliers are needed to pull out the damaged bearing. This needle bearing is made of high-quality metal and is sold separately. It is designed to be compatible with tillers and lawn mowers manufactured by Husqvarna, Poulan, Weed Eater, and Craftsman.

This is a thrust washer that can be used as a replacement for the washers in many models of lawn and garden equipment. The thrust washers are flat and are used to ensure that there is no extra space between pieces connected in the machine. The tight fit can help to reduce vibration and prolong the life of the pieces that are being connected. If the washers are missing or have been damaged, it could result in added vibration and sound from the machine.The metal washers tend to be durable. However, they may still need to be replaced. Over time, they could wear down or become corroded. Other times, they might be lost when working on the machine. The replacement is easy.The thrust washer can work in a range of machines including riding mowers, tillers, and tractors from Craftsman and Husqvarna. Each washer is sold individually. Owners might want to have several of these on-hand. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This hairpin clip is a metal fastener, also known as a spring cotter or retaining pin. This is standard hardware that features a straight edge and an indentation to ensure secure attachment to desired parts or equipment. This reusable formed wire is easy to install and uninstall and has multiple applications. This part is commonly used in conjunction with clevis pins. This replacement hairpin clip comes in a polished finish. Use this genuine OEM replacement part on lawnmowers and tillers from Husqvarna, Craftsman, Murray, Weed Eater, Ryobi, Poulan and Poulan Pro. This item is priced and sold individually.

This is a replacement reduction shaft that is designed for use with select tillers that are used for outdoor gardening and landscaping. The reduction shaft in a tiller is designed to decrease the rotational speed of the unit and attach the upper and lower parts of the tiller. This shaft is subject to constant rotation and excessive vibrations, so it is known to become worn over time. It may also strip at the threads or become otherwise damaged, which would require a replacement. This genuine reduction shaft is manufactured to exact OEM standards by Husqvarna and is compatible with units from the brand, as well as select models from Weed Eater, Poulan, and Jonsered. It is made of durable metal and features two threaded ends. This part is sold as an individual component. Any other parts or hardware will require an additional purchase. It can provide an exact replacement for models that need a new shaft. Owners should always wear gloves for hand protection and work in a well-ventilated area. When repairing the internal parts of a tiller, it will be important to use caution so as not to cause further damage.

The cutting chain on a garden tiller is used as the primary chain to help drive the unit across the soil. Over time, the chain can start to stretch and may not work as well as it did when new. It can also break entirely and require a full replacement with a new cutting chain. Inspecting the chain can give insight into whether it is stretched or has broken and requires a repair or replacement.A screwdriver and a set of wrenches will be needed to replace this part. The process involves removing all of the components out of the chain case. Next, the bolts that hold the case together will need to be taken out. Once the cutting chain is removed from the tiller, the new replacement part can be placed in the same location. After it has been placed, the rest of the parts will need to be reassembled before using the tiller.This cutting chain is compatible with Husqvarna, Poulan, AYP, McCulloch, Poulan Pro, RedMax, Weed Eater, Jonsered, and Craftsman tillers. It comes as an individual OEM replacement part that is sourced directly from the manufacturer.

This replacement part is a tiller chain intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Tiller chains link parts of the machine so that the entire appliance can run smoothly. These chains ensure that the parts in the tiller or cultivator are rotating smoothly.A new tiller chain might be needed if the current one is damaged or broken in any way such as being split or torn. The user might be able to tell when the tiller chain is malfunctioning if there are unusual noises coming from the machine. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This lever lock is a genuine Husqvarna part. It is designed to be a replacement part for several models of tillers. On a tiller, the lever lock is located on the handle assembly. The lever lock holds the handle in place on the frame of the tiller, so it is a very important part.It is not uncommon for the lever lock to become damaged, especially if the handle is jammed and must be forced. If this happens, the lever lock must be replaced before operating the tiller again. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug or power source before attempting to repair it.This lever lock is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Husqvarna, Poulan, Craftsman, and Weed Eater. It also replaces obsolete part number 109228X.

This v-belt is a genuine Husqvarna part, sold individually. This v-belt can be used as a replacement part for a tiller. The purpose of a v-belt is to affix the pulley of the motor to the drive mechanism of the appliance so the wheels are rotated, and the appliance can be operated properly.The v-belt might have to eventually be replaced if it suffers damage that cannot be fixed through a simple repair process. A damaged v-belt should be removed and replaced by this genuine OEM replacement part before using the tiller again. It is a simple replacement process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This is a V-belt made from durable materials and designed for use on a variety of lawn and garden equipment. The main job of the V-belt is to ensure the tines on a tiller are rotating properly. While it is made of strong materials, the V-belt can break or wear out over time. If the belt is extremely worn, the tool may no longer operate the way it should since the part can slip off of the pulley.This V-belt is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The belt can be used with lawnmowers, tillers, and snowblowers manufactured by Husqvarna, Poulan, Weed Eater, and Craftsman.

This part is a replacement tine shaft bearing kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current bearings are broken or in any way damaged, this part can be used as a replacement part in tillers.This tine shaft bearing kit helps to support the tine shaft, which is located inside the gear case. Over time and with regular equipment use, bearings can easily become worn down or broken, requiring replacement. Proper tools are required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this tine shaft bearing kit, the appropriate owner's manual and equipment diagrams should be referred to. This tine shaft bearing kit is suitable for use on a variety of tiller models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This replacement part is a handle grip. This part is found in various types of lawn mowers and allows the user to operate the shift mechanisms from the seated position. It also reduces the amount of pressure the pedals experience. A new handle grip might be needed if the current one is no longer able to shift. If the user cannot grip this part due to damage, it is best to replace it so that the machine can return to working order. If the equipment is not operating smoothly, the handle grip may have become worn down. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are very common in different types of machinery. This part allows for other pieces to be connected and work together so that the machine can operate effectively. A new pulley might be needed if the user notices unusual noises coming from inside the machine. This can be due to a malfunctioning pulley system or damage inside the appliance. Due to the friction that this pulley experiences, it is not unusual for this part to need replacing after years of normal use. Be sure the engine is completely powered down before attempting to replacing this part. Work gloves are also recommended when working near the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.