Parts for Frigidaire FFHI1835VS2: Ice Maker Parts

The Water Tube is an OEM part for Frigidaire refrigerators. It serves as the supply line transporting water from the water valve to the icemaker.

Over extended use, mineral buildup within the water tube can restrict flow. Additionally, cracks or kinks from repeated bending can interfere with proper water delivery.

Symptoms of a bad water tube include:

• Dripping or leaks at connection points
• Inoperable or inefficient icemaker
• Water backup or overflow issues

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Maker Assembly is an OEM part for Frigidaire refrigerators. This part produces ice automatically by freezing water and dispensing the ice cubes into the storage bin. 

Common causes of a bad ice maker include wear and tear from regular use, issues with the water supply line, or malfunctions in the electronic controls. 

Symptoms of a bad ice maker assembly include:

• The ice maker not producing ice
• Ice cubes being smaller than usual or irregularly shaped
• Leaks or puddles around the ice maker area
• Unusual noises coming from the ice maker

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This ice maker cover protects the ice maker's internal components and helps channel ice during production, keeping the assembly clean and functioning properly. It's a direct-fit replacement designed to restore the ice maker's outer housing. What it does:

• Shields the ice maker motor, gear train, and electrical connections from debris and accidental contact
• Helps guide ice as it is harvested and discharged into the bin
• Prevents moisture buildup around internal components that can cause icing issues
• Restores the ice maker's original housing shape for proper operation

• Turn off power to the appliance before starting any work to avoid electrical shock
• Remove the old cover by releasing mounting tabs or screws; align the replacement and snap or screw into place
• Check that the ice maker arm and ejector can move freely after installation

This replacement ice maker door restores the ice dispenser opening on compatible refrigerators, keeping ice contained and reducing spills while helping the dispenser door operate smoothly. What it does:

• Covers the ice maker opening to keep ice inside the bin and reduce drafts
• Helps guide ice when dispensing and prevents accidental spills
• Replaces cracked, broken, or missing dispenser doors that won't close properly
• Restores a proper seal and appearance at the ice maker opening

• Disconnect power to the appliance before beginning repairs
• Remove the ice bin or access panel as needed to reach the old door
• Replace the door carefully, aligning hinges or clips; do not force parts into place
• If fasteners are present, use appropriate hand tools and tighten securely without over-torquing

The Ice Maker Bracket is an OEM part for Frigidaire refrigerators. It is responsible for securely holding the ice maker in place in the freezer compartment.

A bad ice maker bracket can be caused by wear and tear, damage, or improper installation. Signs of a faulty bracket include the ice maker becoming loose or unstable, leading to issues with ice production or dispensing.

Symptoms of a bad ice maker bracket can include:

• Instability of the icemaker
• Issues with ice production or dispensing 
• Excessive noise or vibrations 

Replace your worn-out or damaged ice maker bracket with this genuine OEM part to repair your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

A replacement shoulder screw that secures internal panels and components for proper alignment and stable operation. Fits applications that use a hi-lo quadrex head and M4.2 x 1 thread for a precise fit. What it does:

• Provides a fixed shoulder for spacing and alignment of panels or moving parts
• Holds components together to prevent shifting, rattling, or misalignment
• Restores secure fastening when the original screw is stripped, damaged, or missing
• Works where a hi-lo quadrex head is required for proper driver engagement

• Disconnect power to the appliance before beginning any repair
• Use the correct quadrex driver bit to avoid cam-out or head damage
• Thread carefully and do not overtighten; excessive torque can strip threads or deform mating parts
• Keep removed hardware and panels organized for proper reassembly