Parts for Husqvarna 250201: Ignition System Parts

This clutch cable is a genuine Husqvarna part, sold individually. This clutch cable can be used as a replacement part in a lawn mower. The purpose of the clutch cable in a lawn mower is to provide the operator with a means of stopping and starting the lawn mower while in use, by engaging and disengaging the clutch cable when the operator wants to move the appliance forward or stop the appliance from moving.The clutch cable in a lawn mower might be subject to damage at some point within the typical lifespan of the appliance. If this damage prevents the clutch cable from serving its standard function for the lawn mower, the clutch cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, so that the safe use of the appliance can be guaranteed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This clutch cable is compatible with the following outdoor appliance brands: Husqvarna.

This replacement part is a clutch assembly and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Clutch assemblies are an important part to most lawn equipment. This specific part is able to provide power to the engine of different lawn mowers so the user is able to control the speed and power of the engine. A new clutch assembly might be needed if the user is unable to control the power or speed behind the engine. It is possible that the clutch can become broken after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This fuel check valve grommet is a genuine Husqvarna part, sold individually. This fuel check valve grommet can be used as a replacement part in a lawn mower. The purpose of the fuel check valve grommet in a lawn mower is to affix the connect valve to the fuel tank so that the fuel can pass through these components properly without leaking or being directed elsewhere.The fuel check valve grommet might have to be replaced if it cannot properly direct fuel into the fuel tank. The fuel check valve grommet could suffer damage in the form of tearing, ripping, puncturing, eroding, or warping; if this occurs to the point that fuel is leaking out of the grommet or that fuel is not making its way to the fuel tank through the grommet, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel check valve grommet is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This fuel valve is a genuine Husqvarna part, sold individually. This fuel valve can be used as a replacement part in a lawn mower. The purpose of the fuel valve in a lawn mower is to allow the intake and the shutting off of fuel feeding into the carburetor of the appliance so that it can be mixed with air in the proper ratio to ignite the spark plugs and power on the engine.The fuel valve in a lawn mower might have to be replaced if the component can no longer regulate the fuel intake and shut off. If fuel is frequently leaking from the area of the fuel valve, if fuel is not being properly channeled into the appliance, or if fuel cannot enter the appliance at all, the fuel valve should be assessed and inspected for potential damage, and if there is sufficient damage, the fuel valve should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This fuel valve is compatible with the following outdoor appliance brands: Husqvarna.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This genuine replacement Husqvarna carriage bolt can be used in the infrastructure of several different kinds of appliances that require small engines, including lawn mowers, leaf blowers, lawn tractors, line trimmers, snowblowers, wood-chippers, and generators. Carriage bolts are distinguished by their round heads and flat tips. Their function as a fastener, in conjunction with nuts, is to attach materials or components to one another, wood and metal components in particular. There are several reasons that a carriage bolt might have to be replaced, including misplacement of a carriage bolt, as the part is relatively small and can disappear without immediate consequence. Other reasons to replace a carriage bolt can include damage from overuse, exposure, or age; this damage can manifest in the form of visible erosion, cracking, or piercing that prevents the carriage bolt from properly fastening materials to one another. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carriage bolt is compatible with the following brands: Husqvarna, Poulan, and Craftsman. Part sold individually.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.