Parts for Husqvarna 967334101-00: Ignition System Parts

This is a fuel fitting that is installed in many models of lawnmowers and lawn tractors. It is located in the fuel system and is responsible for connecting one section of the fuel line originating in the fuel tank to a second fuel line that goes into the carburetor. Fuel fittings may need to be replaced when they become loose and brittle through regular use. The component will also require replacement if it is broken, lost, or otherwise damaged. It is recommended that the fuel fitting be replaced if the fuel lines require it.A basic set of tools, including a nut driver, screwdriver, and pliers, may be needed to replace the fuel fitting. The lawnmower or lawn tractor should be placed on a level surface and powered off. Next, remove the spark plug wire to prevent the engine from engaging during the replacement process. Remove the filter housing, fuel lines, and filter to access the fuel fitting. Remove the old component and replace it with a new part.The fuel fitting is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold individually. The part is made to be compatible with lawnmowers and lawn tractors manufactured by Husqvarna.

This fuel check valve grommet is a genuine Husqvarna part, sold individually. This fuel check valve grommet can be used as a replacement part in a lawn mower. The purpose of the fuel check valve grommet in a lawn mower is to affix the connect valve to the fuel tank so that the fuel can pass through these components properly without leaking or being directed elsewhere.The fuel check valve grommet might have to be replaced if it cannot properly direct fuel into the fuel tank. The fuel check valve grommet could suffer damage in the form of tearing, ripping, puncturing, eroding, or warping; if this occurs to the point that fuel is leaking out of the grommet or that fuel is not making its way to the fuel tank through the grommet, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel check valve grommet is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This interlock switch is a genuine Husqvarna part, sold individually. This interlock switch can be used as a replacement part for outdoor appliances with small engines such as a lawnmower or lawn tractor. The purpose of an interlock switch is to make sure that the engine of the appliance will not start unless the brake is pressed. The primary symptom of a damaged interlock switch is an engine that turns on even when the foot is not actively pressing down on the brake. This is a simple repair process that will only require a wrench set to conduct. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This interlock switch is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This replacement part is an adjuster kit. This is a genuine replacement part made by Husqvarna. Adjuster kits are used to change the height of the blades in different types of lawnmowers. If the adjuster kit is not working the desired settings might not be achieved. A new adjuster kit might be needed if the user is not able to change the cutting height of the blades before using the machine. This can be due to normal wear and tear over time or other unexpected damage. Be sure to wear work gloves during this repair as this part is typically close to the blades of the machine and can cause injury if the user is not careful.This is a genuine OEM replacement part to ensure proper fit long-lasting use. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. This particular spring is found in different types of lawn mowers and provides torque and other energy so that the engine works properly and efficiently. A new spring might be needed if the current one is missing or damaged in any way. It is common that they are put under too much pressure and can snap and need to be replaced. It is recommended that working gloves be worn since these parts can be dangerous to those handling them. Be sure to reference the appropriate user guide for more instructions on how to replace this part.This part is sold as a single piece. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit and long lasting use.

This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement indicator meter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current indicator meter is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The indicator meter enables the user to read important messages regarding the hours of operation and other system alerts. This part may become damaged or defective within the normal lifespan of the equipment, thus requiring replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this indicator meter, the appropriate owner's manual and equipment diagrams should be referred to. This indicator meter is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.