Parts for Husqvarna 96784460100: Ignition System Parts

This replacement part is a fuel cap assembly. This is a genuine replacement part made by Husqvarna. Fuel caps are commonly found in machines that require fuel to run. The engine then uses the fuel to operate effectively. The tank is what holds the fuel so that it can be accessed during use, and the fuel cap ensures that the substance stays inside the tank and does not escape during use.A new fuel cap assembly might be needed if the current one is damaged or leaking the fuel. If this is the case, replace the cap immediately as leaking fuel is a serious safety hazard. It is recommended that work gloves be worn as there can still be fuel leftover in the tank during the repair. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This ignition switch is a genuine Husqvarna replacement part for lawn tractors and lawn mowers. The function of an ignition switch is to allows a user to easily start the mower with a simple turn of a key. A lawn mower or lawn tractor ignition switch might have to be replaced if there is damage to the part that strips it out, such that a key cannot properly fit into it and start the engine. If the ignition switch is damaged to the point of warping, it must be removed and replaced immediately, as a lawn mower or lawn tractor cannot be used without an ignition switch. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ignition switch is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Craftsman. This part sold individually.

This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This fuel valve is a genuine Husqvarna part, sold individually. This fuel valve can be used as a replacement part in a lawn mower. The purpose of the fuel valve in a lawn mower is to allow the intake and the shutting off of fuel feeding into the carburetor of the appliance so that it can be mixed with air in the proper ratio to ignite the spark plugs and power on the engine.The fuel valve in a lawn mower might have to be replaced if the component can no longer regulate the fuel intake and shut off. If fuel is frequently leaking from the area of the fuel valve, if fuel is not being properly channeled into the appliance, or if fuel cannot enter the appliance at all, the fuel valve should be assessed and inspected for potential damage, and if there is sufficient damage, the fuel valve should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This fuel valve is compatible with the following outdoor appliance brands: Husqvarna.

This fuel check valve grommet is a genuine Husqvarna part, sold individually. This fuel check valve grommet can be used as a replacement part in a lawn mower. The purpose of the fuel check valve grommet in a lawn mower is to affix the connect valve to the fuel tank so that the fuel can pass through these components properly without leaking or being directed elsewhere.The fuel check valve grommet might have to be replaced if it cannot properly direct fuel into the fuel tank. The fuel check valve grommet could suffer damage in the form of tearing, ripping, puncturing, eroding, or warping; if this occurs to the point that fuel is leaking out of the grommet or that fuel is not making its way to the fuel tank through the grommet, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel check valve grommet is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement indicator meter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current indicator meter is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The indicator meter enables the user to read important messages regarding the hours of operation and other system alerts. This part may become damaged or defective within the normal lifespan of the equipment, thus requiring replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this indicator meter, the appropriate owner's manual and equipment diagrams should be referred to. This indicator meter is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This replacement part is a wire harness and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Wire harnesses are an important part in many lawn equipment engines. They are responsible for connecting different parts of the machine so they everything runs smoothly and efficiently. A new wire harness might be needed if the user notices that some parts of the appliance are not working properly. It is normal for wire harnesses to become inoperable after years of normal wear and tear as wires are often damaged. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.