Kelvinator Refrigerator Gasket & Seal

The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators, designed to seal the door of the refrigerator compartment, ensuring an airtight closure. This door gasket plays a crucial role in maintaining the efficiency of the refrigerator by preventing cold air from escaping and warm air from entering.

Common causes for a Refrigerator Door Gasket to fail include normal wear and tear from opening and closing the door, damage from cleaning or misuse, and aging of the material, which can lead to hardening and loss of elasticity.

Symptoms of a bad Refrigerator Door Gasket include:

• Noticeable gaps or tears in the gasket
• The refrigerator door does not close as tightly as it should, or it requires more force to close.
• Condensation or frost buildup around the door edges
• An increase in energy consumption

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators. It lines the edge of the refrigerator door, creating an airtight seal that prevents warm air from entering and cold air from escaping the unit. This seal is crucial for maintaining the efficiency of the refrigerator, ensuring that it runs smoothly and keeps food at the correct temperatures without overworking the cooling system.

Symptoms of a bad Refrigerator Door Gasket include:

• Visible cracks, splits, or wear in the gasket material
• Condensation or frost build-up around the door edges
• The refrigerator door not closing fully or seeming to have air leaks

Causes of a bad door gasket can stem from natural degradation over time, exposure to food oils and residues that degrade the rubber, or deformities caused by improper door usage or accidents.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Door Gasket is an OEM part for Frigidaire freezers. This part creates a seal around the freezer door to prevent warm air from entering and cold air from escaping, ensuring the freezer maintains its optimal freezing temperature. The gasket is made from a durable rubber material designed to conform tightly against the freezer frame when the door is closed. 

Over time, freezer door gaskets can wear out, become brittle, or lose their elasticity, leading to gaps and leaks in the seal.  

Symptoms of a bad Freezer Door Gasket include:

• Visible cracks or tears in the gasket
• Condensation or frost buildup around the door edges
• The freezer runs more frequently or for longer periods
• Difficulty in maintaining the set freezer temperature
• Increased energy bills due to the freezer working harder

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Gasket-Freezer Door is an OEM part for Frigidaire refrigerators. It ensures a tight seal around the freezer door, preventing warm air from entering and maintaining the correct temperature inside the freezer. The gasket measures approximately 28-1/2" x 17-3/4".

You should replace this gasket if it becomes worn out or damaged. Causes of a bad gasket can include wear and tear from regular use, damage from cleaning or mishandling, or warping due to temperature fluctuations.

Symptoms of a bad gasket include:

• Frost buildup inside the freezer
• The freezer not maintaining the correct temperature
• Increased energy consumption
• Visible cracks or tears in the gasket

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This door gasket seals the dishwasher tub opening to prevent water leaks during the wash cycle. A fresh, pliable gasket helps maintain proper water containment and quiet operation.

• Creates a watertight seal around the dishwasher door perimeter
• Helps reduce leaks, puddling, and excessive moisture at the base of the door
• Restores proper door compression and sound dampening

• Disconnect power and turn off water supply before servicing
• Remove the old gasket from the channel; clean the groove of debris and mineral buildup
• Press the new gasket evenly into the channel, aligning the center at the top first
• Close the door to help seat the seal; check for pinches or gaps and adjust as needed

A molded gasket that seals the evaporator coil cover to reduce air bypass and help direct cold air over the coils for more consistent cooling. Replaces a worn or damaged seal to help restore proper airflow and reduce frost buildup. What it does:

• Seals the evaporator coil cover to prevent warm air from bypassing the coil
• Helps maintain proper airflow for consistent cooling performance
• Reduces frost or ice buildup caused by air leaks around the coil cover
• Prevents condensation and dripping by keeping air where it belongs

• Disconnect power to the appliance before servicing to avoid electrical shock
• Thaw any frost/ice accumulation and remove the evaporator access cover per manufacturer instructions
• Clean mating surfaces, then press the seal into place ensuring a full, even fit around the cover