Kenmore / Sears Lawn Mower Parts

Size: 10-24X5/16-NI

This factory fastener secures panels, trim, or brackets on your appliance. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned for proper operation and a clean, finished appearance.

• Fastens exterior panels, trim pieces, or internal brackets to the appliance chassis
• Replaces lost, damaged, or stripped hardware
• Helps prevent vibration, rattling, and gaps between parts
• Common signs you need this screw: missing hardware, loose or misaligned panel/trim, stripped head or threads

• Disconnect power before servicing; also shut off the gas supply
• Use the correct driver; start the screw by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent stripping or cracking adjacent parts
• Repair or replace the mounting point before installing

Screw: 8-16 x 3/8 inch.

This replacement blower motor restores airflow in compatible Broan ventilation fans and range hoods, helping clear smoke, steam and cooking odors. It's a direct-fit electric motor designed to restore proper venting performance. What it does:

• Powers the fan/blower to move air through the hood or ductwork
• Helps reduce smoke, steam and cooking odors by restoring ventilation
• Replaces failed, noisy, or non-spinning motors to return normal operation
• Matches original electrical and mounting interfaces when the OEM part number is correct

• One replacement blower motor

• Disconnect power to the appliance at the breaker before starting work
• Verify the OEM part number on the motor label and compare mounting and connector type before installation
• Basic mechanical skill and common hand tools are typically required

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

• Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
• Helps keep components aligned and secure during operation
• Replace if the original is missing, rusted, stripped, or damaged
• Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

• Disconnect power; shut off gas or water supply before servicing
• Support the panel or part being attached; hand-start threads to avoid cross-threading
• Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
• If multiple matching screws secure a part, consider replacing them as a set for consistent hold

This replacement screw secures appliance panels and components to restore proper fit and reduce vibration. A straightforward fastener that helps keep parts aligned and prevents noise or loose trim from worsening. What it does:

• Fastens panels, brackets, or trim pieces to the appliance frame
• Helps stop rattling or vibration caused by loose or missing hardware
• Restores proper alignment where original screw has been lost or damaged
• Works wherever the OEM screw specification is required for secure mounting

• Turn power off and unplug the appliance before working on it
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed fasteners organized so you reinstall the correct pieces

This mounting clip secures a thermostat, temperature sensor, or capillary bulb in the correct position so it can sense temperature accurately and control the appliance. Replacing a damaged or missing clip helps prevent loose components and erratic readings. What it does:

• Holds the thermostat or sensor firmly against its mounting surface for proper thermal contact
• Helps maintain stable, accurate temperature regulation
• Replaces a bent, broken, or missing clip that won't hold securely
• Common symptoms include a dangling sensor/bulb, rattling, or inconsistent temperature response

• 1 clip

• Disconnect power (and gas, if applicable) and allow the appliance to cool completely before service
• Access the thermostat/sensor area and note original orientation and routing
• Move the component into the new clip and secure it at the original mounting location
• Avoid kinking a capillary tube or damaging sensor leads; the clip is fully seated

A star knob connects the upper and lower handles on an outdoor appliance, and if removed, the upper and lower handles are quick-released. This part is made of black heavy-duty black plastic, and the threads are made of steel. Over time, the threading can become worn out, making the connection loose, and causing the two handles to no longer stay in place. Star knobs are a straightforward repair that can be done in a matter of minutes. Just unscrew the original, damaged knob and screw in the new knob. The knob is designed to be unscrewed by hand, so there is no need for additional tools to make this repair. This genuine OEM replacement part is designed for a variety of outdoor appliances, including lawnmowers, edgers, chippers, tractors, trimmers, and cultivators. This star knob is compatible with Yard Machines, Yard-Man, Cub Cadet, Bolens, Craftsmen, and Ryobi products. This part ships individually.

This replacement power cord set restores the electrical connection to your range hood or ventilation appliance, providing a safe, secure path for power when the original cord is damaged or worn. It helps return reliable power delivery and operation. What it does:

• Replaces a damaged or frayed power cord to restore consistent power to the unit
• Provides the appliance's main AC connection so the fan and lights can run
• Stops intermittent power or sparking caused by a compromised cord
• Matches the OEM function and electrical connection for a direct replacement

• Disconnect house power at the breaker before beginning work
• Follow the appliance's service manual for wiring and strain-relief requirements
• Use proper tools and wire connectors; confirm secure ground connection

Whirlpool trash compactor repair manual.

This replacement power cord restores electrical connection to compatible range hoods and ventilation units, letting the appliance receive safe, reliable power. Use this when the original cord is damaged or fails to deliver consistent power. What it does:

• Replaces a worn, frayed, or damaged power cord to stop intermittent power or loss of power
• Provides the appliance's primary AC connection from wall outlet to unit
• Helps eliminate visible damage, sparks, or exposed wiring that can present hazards
• Returns the unit to normal operation when cord failure is the root cause

• Disconnect power at the breaker and unplug the appliance before starting any work
• Basic tools may be required; handle wires and terminals carefully to avoid damage
• Follow the appliance manufacturer's wiring diagram and terminal markings when connecting

The Champion spark plug powers the engine by igniting a mixture of fuel and air in the cylinder. Occasionally, a spark plug will need gapping to work efficiently. When a spark plug is burnt out or damaged, the engine will either not start or run rough. The engine may also stall out just after starting. First, change the air filter and clean the carburetor, and if the engine is still experiencing problems, then it might be time to replace the spark plug. The replacement of this genuine OEM Champion spark plug is easy and will not take much time. The Champion spark plug is compatible with lawnmowers, small engines, snowblowers, string trimmers, leaf blowers, edgers, hedge trimmers, and chainsaws manufactured by Ariens, Cub Cadet, Craftsman, Husqvarna, Kawasaki, Lawn-Boy, Paramount, Poulan, Poulan Pro, Tecumseh, Toro, Turf King, and Weed Eater brands. Sold individually.