Parts for Briggs & Stratton 135232-1075-E1: Kits / Gasket Sets - Carburetor Parts

The intake gasket on a carburetor serves an important function. It ensures there is no additional air getting into the carburetor. If a gasket on a carburetor is not working properly, it could allow for extra air and dirt to get in, which might cause engine performance issues.Over time, the gaskets will need to be replaced. They can dry, crack, and break over time. It is not a matter of whether they should be replaced, but when. Ideally, gaskets should be replaced whenever the carburetor is serviced. Check on the gaskets occasionally to ensure they are in good condition.This intake gasket is used on a wide range of lawn and garden machines including mowers, tillers, leaf blowers, generators, and wood chippers. This gasket is compatible with select models from Midwest Engine, Briggs & Stratton, Craftsman, Toro, and Simplicity. It is sold individually and is a genuine OEM replacement sourced from the manufacturer.

This is a carburetor overhaul kit can be used to rebuild vintage outdoor power equipment or to improve the performance of a small engine. When necessary adjustments don't fix the problems in a machine, rebuilding the carburetor may be the best solution. Use this kit to rebuild one that runs erratically or causes issues from time to time. Aside from having this kit ready, be sure also to have screwdrivers, clamps, needle-nose pliers, a socket/ratchet set, and a nut driver. Some carb cleaner would likewise help. This carburetor overhaul kit is an OEM product sourced directly from the manufacturer. It comes with everything needed and more. An instruction kit is included along with gaskets, needle, float, and seals. This carburetor rebuild kit works with specific models of leaf blowers, vacuums, and small engines from Toro, Cub Cadet, Simplicity, and Briggs & Stratton.

This is a replacement needle valve spring that is an exact match for the one that came with the machine. It is a small metal spring that goes near the idle mixture valve. It can help with the control of the flow and can help to keep the carb from overfilling. There may be a need to replace the needle valve spring. It could become corroded over time, or it could break. It might also start to wear out and not work as well as it once did. Other times, owners who were making other repairs could misplace the spring. No matter what the problem with the spring might be, owners need to replace them when needed. This is an authentic OEM replacement needle valve spring. It is sold individually, and some buyers might want to have more than one of them on hand. The part is used for many types of machines including lawn mowers, tillers, leaf blowers, edgers, log splitters, wood chippers, generators, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, and Simplicity.

This air cleaner gasket is a genuine replacement that is designed for select models of 3-5 HP small engines from Briggs & Stratton. The air cleaner gasket is designed to fit between the air cleaner and the carburetor assembly. This helps to create a seal between the two components and ensure that air does not leak out of the engine to provide the appropriate pressure. Gaskets are exposed to a lot of heat and pressure, along with constant vibrations, which can cause them to become frail or brittle over time. Replacing them is usually considered a part of routine maintenance and OEM parts should always be used. This genuine OEM air cleaner gasket is manufactured to exact standards and can be used on select engines from Briggs & Stratton and Toro. The engines are typically found on equipment like blowers, lawn mowers, generators, and other small lawn and garden machines. This gasket is sold as a single unit and does not include additional components or hardware. To replace the gasket, be sure to have the appropriate tools and a cool engine for best results. Never perform work when the engine is hot and always wear gloves to protect the hands.

This air cleaner gasket is made of durable composite material. The main purpose of the gasket is to create an airtight seal for the air cleaner assembly. However, as time goes on, the material can start to wear out and deteriorate and will need to be replaced to ensure the best performance from the outdoor power tool. If the air cleaner gasket is cracked or worn out, replacing it starts with moving the equipment to a stable surface and disconnecting the spark plug wire. Use a screwdriver to remove the top of the air cleaner cover, the filter, and then the bottom half of the cover. Pry out the old air cleaner gasket before installing the new part. Reattach the bottom of the cover, replace the filter, and screw down the top half of the cleaner.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The air cleaner gasket is made for use with lawnmowers, tillers, pressure washers, generators, and wood chippers manufactured by Simplicity, Toro, Craftsman, and Briggs & Stratton.

This genuine Briggs and Stratton idle mixture valve is an original OEM replacement part designed to fit select engines made by the brand. This valve is responsible for controlling the mixture of air and gasoline that enter the carburetor, which helps determine how much power gets to the engine. This valve opens and closes based on the pull of the engine throttle, allowing the engine to perform at the optimal level based on user need. The valve can wear out over time due to the constant repetitive motion and high heat exposure, which can result in the need for replacement. This part should always be replaced with a genuine OEM model. This OEM idle mixture valve is manufactured for use in lawn and garden equipment that features select small engines manufactured by Briggs and Stratton. It is sold as an individual unit and does not include any additional parts or hardware. If additional parts are needed, they will require a separate purchase. This part replacement should be done on an engine that has had sufficient time to cool so that there is no danger of burns. Gloves should be worn at all times and it may be necessary to drain some of the fuel before working on these engines.

This is a replacement fuel tank gasket. It installs between the carburetor and the fuel tank assembly, and is sometimes called a carburetor gasket or a fuel tank assembly gasket. It helps to prevent leaks from occurring between the fuel tank assembly and the carburetor. Gaskets are subject to high temperatures and pressure. Over time, they will degrade, and leaks will eventually occur. When this happens, the gasket must be replaced. The gasket should also be replaced whenever the fuel tank assembly/carburetor are separated, such as to repair or replace the carburetor float. Signs the gasket needs to be replaced include visible leaks between the carburetor and the fuel tank and operational problems with the machine. To replace the fuel tank gasket, remove the air box and air filter. Disconnect the spark plug, and then crimp the fuel line closed. Remove the carburetor and then remove the old gasket. Note that it may require scraping. Make sure that both mating surfaces are clean and dry before installing the new gasket. Reassemble everything in reverse order. This is a genuine OEM replacement fuel tank gasket and is sold individually. It fits Briggs & Stratton engines on over 150 different yard machines.

This is a carburetor diaphragm replacement for use with 3-5 gross HP horizontal crankshaft engines. The diaphragm in a carburetor helps to regulate the fuel in the air-fuel mixture and is an important part of the overall engine. If the diaphragm is bad, owners will notice that the engine does not run smoothly. The machine may not start, or it might suddenly stop in the middle of working. In some cases, the engine might sound sluggish, or it could have an abundance of smoke. When the engine is operating at higher speeds, it could cause it to seem like it could be flooding. These symptoms could indicate that a replacement carburetor diaphragm is needed. During replacement, it is important to make sure the surfaces are clean and dry, and that no solvents or gasket sealer is used. This genuine OEM replacement part is sold individually. The carburetor diaphragm can be used with small engines, tillers, leaf blowers, wood chippers, generators, and lawn mowers. Compatible brands include Briggs & Stratton, Midwest Engine, Craftsman, Toro, and Simplicity.