Kmart Parts

This wheel assembly is a durable replacement part created for use with snowblowers, lawnmowers, and other yard equipment. The wheel is the component on the machine that makes it easy for it to be transported and moved around a location. On lawnmowers, it helps with cutting height adjustment to ensure the grass is cut to the right length. It comes with all the components needed to replace the wheel with the exception of required tools.Sometimes wheels can become damaged or will malfunction and require replacement. A visual inspection of each of the wheels will give information about whether a replacement is required. If there is lots of damage or the wheel is broken, it has to be replaced before the lawn tool can be used. The old wheel will need to be removed before the other wheel can be placed. This may require the use of a socket set, wrench set, and screwdriver.This is a genuine OEM replacement part sourced directly from the manufacturer. It's made of durable plastic and is sold individually. The wheel assembly is compatible with lawnmowers, snowblowers, and tillers by MTD, Craftsman, Huskee, Yard-Man, Yard Machines, Bolens, and Troy-Bilt.

This fuel tank assembly from MTD is a genuine replacement part. It is a fuel reservoir made from a thick and durable plastic material. It is designed to fit and work with tillers, edgers, and string trimmers from MTD, Craftsman, Cub Cadet, and Yard Machines. When this fuel tank wears out, liquid may seep out and waste gas. A fuel tank assembly replacement is easy. The process will take approximately 30 minutes or less. First, make sure that the machine has cooled down and there is little fuel left in the tank. Make sure to wear gloves since fuel spills can occur, especially when removing the fuel lines. Then, remove the spark plug connector to prevent the engine from starting. Disconnect the fuel line and unfasten the mounting screws of the fuel tank. Install the fuel tank and attach the fuel line. This replacement fuel tank assembly is sold individually. The assembly includes the tank, fuel cap, and one fuel line. It is an original replacement made directly by MTD.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

This replacement foam air filter is an authentic OEM replacement part for both lawn tillers and cultivators. For a combustion engine to run effectively, the carburetor must maintain a balance of fuel and air. Therefore, the engine takes in air from the outside and mixes it with fuel. However, if the air is dusty, it will clog the carburetor and cause the engine to seize up. To prevent this from happening, manufacturers add an air filter like this one to capture any dust or debris. When lawn appliances are in use, they often kick a lot of dirt into the air. This means that air filters get a lot of use every time an operator uses their appliance. Eventually, the filter will reach max capacity, and air will no longer pass through it. When this happens, the filter will need replacing. Changing out an air filter is a simple job and will only require a screwdriver at most. This part is made for Cub Cadet, Troy-Bilt, and MTD tillers and cultivators and is sourced from its original manufacturer. This part ships individually.

Carburetor gaskets ensure that the space between the carburetor itself and the insulator is properly sealed. This prevents air from seeping into the engine. As time passes, gaskets begin to become worn and crack, which can lead to small air leaks. If the gasket deterioration becomes severe the leaks will worsen. An air leak on an engine can cause vibrations and misfires. Gaskets should be regularly replaced to prevent engine trouble. This carburetor gasket is a genuine OEM part that has been sourced directly from the manufacturer. This carburetor gasket is manufactured from a top-quality composite material. This replacement gasket fits a number of different models of Troy-Bilt and Craftsman lawn and garden equipment. Please note these gaskets are sold individually.

This blade adapter kit secures the blade of the lawnmower to the spindle shaft. It's used on walk-behind lawnmowers and is made of durable metal. The kit is sold as an individual item but comes with the blade bolt, the adapter, and the bell blade support. Over time, these parts can wear out or become damaged and will require replacement.The only tool needed for the replacement is a socket set. Remove the spark plug wire and hold the blade while wearing gloves. Take off the blade bolt and support, followed by the blade. Attach the new parts to the lawnmower and reassemble the other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The blade adapter kit is sold as an individual component. It is made for use with lawnmowers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolen, Yard-Man, and MasterCut.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

This is a reverse cable that is used on many tillers. It's made of durable plastic and metal. The reverse cable is the component in a tool that allows the tiller to help disengage and engage the reverse drive function of the tiller. In some cases, the part will become frayed or broken and must be replaced. The cable also contains delicate connectors that can become damaged. If this occurs, the reverse cable itself will need a replacement. The cable can also become too stretched out and stop working correctly.If the reverse cable for a tiller is broken, stretched out, or otherwise damaged, a pair of pliers will be needed to replace the part. This is a simple repair that only takes a few minutes to handle. The frayed or damaged cable should be removed from the tiller so the new one can be installed in the same place. Before making the replacement, make sure the spark plug wire has been disconnected.This is an authentic OEM replacement component that is directly sourced from the manufacturer. The reverse cable is sold as an individual item. It is designed to be compatible with tillers manufactured by Yard-Man, Craftsman, Huskee, Cub Cadet, MTD, and Yard Machines.