Kmart Tiller Parts

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This replacement forward drive v-belt connects to the transmission in certain types of lawn and garden machines and allows the machine to move forward when it is in use. Over time, the belt could start to have issues. In some cases, it may begin to crack and dry out. It could start to flake away and fall apart, which means it will need a replacement. Other times, the belt could simply snap or no longer fit properly. Owners should inspect the forward drive v-belt in their machine regularly to ensure it is in good condition. Before installing a new belt, they should clean the pulleys to ensure the best performance. The genuine OEM forward drive v-belt is sold individually, and it works well for many models of tiller and walk-behind mower. Compatible brands include MTD, Husky, Yard Machines, Troy-Bilt, and Cub Cadet. Buyers in need of a forward belt should always ensure they are getting the right belt for their machine.

This is a V-belt that is used on several types of tillers from top manufacturers. It's responsible for making sure the tiller tines rotate within the tiller. The belt is made from durable rubber but over time, it can stretch out, break, or wear out. The more the tiller is used, the more likely it is that the V-belt will need replacement. Sometimes mechanical issues can also cause the belt to wear out more quickly than expected. If the belt is overly worn, it can cause the tiller to operate inefficiently since the belt can slide off the pulley. With a V-belt that is broken, the tool will no longer operate until it has been replaced. This V-belt is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to be used with tillers manufactured by Yard-Man, Craftsman, Troy-Bilt, Huskee, Montgomery Wards, Bolens, MasterCut, MTD, Yard Machines, and Cub Cadet.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for outdoor appliances with small engines such as string trimmers and leaf blowers. This spark plug provides an ignition source for the engine.The spark plug might have to be replaced at some point in the standard lifespan of the appliance if it suffers enough damage to render it useless. The spark plug might be cracked, punctured, or eroded enough to reduce its functionality. If this occurs, the spark plug should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: MTD and Craftsman.

This wheel assembly is a durable replacement part created for use with snowblowers, lawnmowers, and other yard equipment. The wheel is the component on the machine that makes it easy for it to be transported and moved around a location. On lawnmowers, it helps with cutting height adjustment to ensure the grass is cut to the right length. It comes with all the components needed to replace the wheel with the exception of required tools.Sometimes wheels can become damaged or will malfunction and require replacement. A visual inspection of each of the wheels will give information about whether a replacement is required. If there is lots of damage or the wheel is broken, it has to be replaced before the lawn tool can be used. The old wheel will need to be removed before the other wheel can be placed. This may require the use of a socket set, wrench set, and screwdriver.This is a genuine OEM replacement part sourced directly from the manufacturer. It's made of durable plastic and is sold individually. The wheel assembly is compatible with lawnmowers, snowblowers, and tillers by MTD, Craftsman, Huskee, Yard-Man, Yard Machines, Bolens, and Troy-Bilt.

This replacement foam air filter is an authentic OEM replacement part for both lawn tillers and cultivators. For a combustion engine to run effectively, the carburetor must maintain a balance of fuel and air. Therefore, the engine takes in air from the outside and mixes it with fuel. However, if the air is dusty, it will clog the carburetor and cause the engine to seize up. To prevent this from happening, manufacturers add an air filter like this one to capture any dust or debris. When lawn appliances are in use, they often kick a lot of dirt into the air. This means that air filters get a lot of use every time an operator uses their appliance. Eventually, the filter will reach max capacity, and air will no longer pass through it. When this happens, the filter will need replacing. Changing out an air filter is a simple job and will only require a screwdriver at most. This part is made for Cub Cadet, Troy-Bilt, and MTD tillers and cultivators and is sourced from its original manufacturer. This part ships individually.

The carburetor gasket plate creates a seal between the air cleaner base and the carburetor body. This plate is made of durable material but it is exposed to constant pressure and heat, which can cause it to degrade over time. It can also become damaged or broken, which would require a replacement. If the gasket is degraded or damaged, it could allow air to leak out of the engine, reducing compression and affecting performance. Severe cases could result in total engine failure, which is why replacement should be done as soon as possible. This genuine OEM gasket plate is designed to be used in a variety of log splitters, tillers, and lawn mowers from brands like Yard Machines, MTD, Yard Man, Cub Cadet, Troy-Bilt, and Husky. This carburetor gasket plate is made of durable materials and sold as an individual piece. No hardware is included for this part and will require an additional purchase if needed. Always allow the engine to cool before performing repairs and wear gloves for hand protection.

This is a genuine replacement O-ring, which is a standard part on a number of engines. This O-ring is specifically designed as a replacement for the one found in the carburetor on select lawn and garden engines. The O-ring is designed to create a seal in the carburetor to ensure optimal performance and prevent leaks. It is also designed to help create the right amount of pressure. Over time, O-rings can become corroded, worn, or damaged due to their exposure to pressure and high heat. If they become broken or damaged, they can result in poor engine performance or even total engine failure. This genuine OEM O-ring is manufactured by RYOBI and compatible with a number of tillers, trimmers, and blowers from this brand. It is also designed for use with select models from Bolens, Yard Man, MTD, and Troy-Bilt. There are more than 150 models that can use this specific O-ring. It is made of durable materials and sold as an individual unit. Keep in mind that because O-rings have multiple applications and engines may have more than one type, it is important to double-check the location and application of the part to ensure the right one is being used.

These quality tiller tines are used on a variety of yard tillers. Tiller tines are blades attached to the tiller that turn soil and prep it for cultivating a garden. As the tiller tines are used, they can become worn down, broken, or damaged through use or impact with rocks and other debris. These are C-shaped tines that can cut through dense soil.If the tiller tines are bent, dull, or damaged, they will need to be replaced, otherwise they might till the soil unevenly and may not reach the depth required. To replace the tines, remove the spark plug wire before taking off the tine shield end cover. Taking out the tines requires removing the cotter pin from the clevis pin so the clevis pin can be pulled out. Next, the tines can be pulled directly off of the shaft. Slide on the new tines and reinstall the clevis and cotter pins before using the tiller again.These tiller tines are an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The tines are compatible with tillers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Yard Machines, MTD, Huskee, and Montgomery Wards.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.