Lawn Chief Lawn Mower Parts

This block bushing is a genuine MTD part, sold individually. This block bushing can be used as a replacement part in a lawnmower. The purpose of the block bushing in a lawnmower is to facilitate the ease of rotational movement while also fastening to one or more components of the internal machinery of the lawnmower. The components of a block bushing are the bearing in the center, the holes for fastening, and the housing unit.This replacement will be necessary if the block bushing suffers enough damage to render it beyond functionality. This damage could occur from general wear and tear over long-term use, overexposure to inclement weather, or an accidental collision with a hard object such as a rock, a curb, or a landscaping block.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This block bushing is compatible with the following outdoor appliance brands: MTD and Craftsman.

This sleeve bearing is a genuine MTD part, sold individually. This sleeve bearing can be used as a replacement part in a lawnmower. The purpose of a sleeve bearing is to facilitate the linear motion between two components within the internal mechanism of the lawnmower while reducing the friction between those components. This is a small component that can be easily lost, misplaced, or damaged with long-term use. If the sleeve bearing is dented, warped, cracked, punctured, or eroded, it should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This sleeve bearing is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Machines, Huskee, Bolens, and Yard-Man.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in lawnmowers, snowblowers, and wood chippers. This part assists in fastening two components together by creating a slight gap that reduces friction.The spacer might have to be replaced if it is lost, misplaced, or damaged from general wear and tear with long-term use. If the spacer is lost at some point within the typical operation of the appliance and its absence is noticed by the operator, the spacer should be replaced by this genuine OEM replacement part. If the spacer is damaged beyond functionality, the spacer should be immediately replaced. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This spacer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Huskee, Yard Machines, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This replacement part is an adjuster kit. It is a genuine replacement part made by MTD. This adjuster kit is typically found in lawnmowers and is responsible for assisting the user in changing the height of the blades so that the user may determine the setting which the grass is cut at. A new adjuster kit might be needed if the user is unable to adjust the height of the blades and therefore cannot perform the necessary duties. If the blades are stuck at one height it is possible that the adjuster kit is to blame. Because this part is located close to dangerous objects it is recommended that work gloves be worn for protection. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. Note that part is sold individually and is sourced directly from the manufacturer.

This genuine OEM replacement part idler pulley plays an important part on many lawn tractors, mowers, and snowblowers. It drives the engine's belt system, particularly the belts connected to the crankshaft. It helps to create motion throughout the engine, including in the steering pump, air compressor, and the alternator. Therefore, without this pulley, the engine will not function properly. As with any part of an engine, an idler pulley will begin to wear down over time. When this happens, an idler pulley will begin slipping, causing the belts to no long run smoothly. If an idler pulley breaks completely, the engine will not start. Before replacing an idler pulley, be sure to let the engine cool completely, as you will have to remove several parts with a screwdriver and socket wrench set. This idler pulley will work with Troy-Bilt, Yard Machines, MTD, Cub Cadet, and Yard Man appliances. It is a high-quality replacement part sourced directly from the original manufacturer. This part ships individually.

This flat idler pulley is intended for use with some lawn tractor models. The idler pulley fits between the pulley and the variable speed pulley. It helps to ensure the tractor is operating efficiently by providing tension and guiding the drive belt in the engine. One of the common signs of a problematic idler pulley is a squealing sound when the engine is idling.The pulley could become damaged due to wear and tear over time. There is also a chance for corrosion, although this is rare except in machines that have had the same pulleys for many years. They will need to replace problematic pulleys to make sure their tractor runs properly. The owner can replace the pulley on their own using pliers, a screwdriver, and a wrench set.The flat idler pulley is for use with select lawn tractors from MTD, Ryobi, Yard Machines, Yard-Man, and Husky. The part is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer.

This is an MTD drive pulley. The drive pulley sends power from the engine to the transmission, propelling the lawn mower forward or backward. This propelling is done through the use of a drive belt and drive pulley. When the drive pulley malfunctions on a lawn mower, it loses the ability to send power from the engine to the transmission. This prevents the lawn mower from being able to move forward or backward. Typically the mower will continue to start; however, engaging the gears will not trigger a response. Start the drive pulley repair by removing the deck of the lawn mower. Always make sure the battery is disconnected. Loosen the transaxle pulley with a socket wrench. Relieve tension from the upper drive belt by disconnecting the spring from the anchor rope. Remove the upper drive belt and lawn mower belt guide. Take the belt off the variable speed pulley and remove the belt securing the crankshaft pulley. Repeat these steps in reverse to install the new pulley.This part is compatible with Craftsman, MTD, Troy-Bilt, and Yard-Man brand lawn mowers. It is sourced directly from the manufacturer as a genuine OEM part

This is a replacement lawn mower transmission supplied directly from the manufacturer. The lawnmower transmission rotates the axle, which will move the wheels and propel the mower forward. The transmission may need to be replaced if it locks up, or if the mover won't move forward as it should.A pair of pliers, drill with a bit set, a socket wrench and nut driver set will be needed to replace this part. Start by disconnecting the spark plugs, then remove the drive cover, fuel tank cap, driver's screws, top, and bottom. Now the drive cover will come off. Remove the ground drive belt. Release the drive control cable from the lever. Take off the front wheels, and then the broken transmission can be removed. Install the new transmission assembly and reinstall the parts in reverse order. This lawnmower transmission is a genuine OEM replacement part. It is designed to be used with Craftsman, Troy-Bilt, Cub Cadet, MTD, and Yard-Man.