Lawn General Tractor

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

Replacement spacer for lawn mowers and tractors. Installs between components to maintain proper clearance. Order a new spacer if worn or missing.

Replace a bent, cracked, or broken steering arm on your lawn tractor. This linkage part connects the steering wheel to the front wheels for directional control.

If your lawn tractor pulls to one side or wheels wobble, a worn axle may be the cause. This wheel axle ensures proper alignment and smooth operation.

The lawn tractor right hand short axle assembly is the stub axle on the right front side of your tractor that the front wheel mounts onto and rotates around during steering and driving. It bears the weight of the front of the machine and allows smooth wheel movement. Replace this part if the right front wheel wobbles, feels loose, has excessive play, or the axle is bent, worn, or broken.

This is a left-hand front axle spindle assembly designed for a lawn tractor with 15-inch by 6-inch wheels featuring a round shoulder design. It connects the front wheel to the axle and allows the wheel to rotate freely for steering. Replace this spindle if you notice excessive play in the front wheel, uneven tire wear, or difficulty steering the tractor.

Black height adjustment knob for lawn tractors and mowers. Replaces broken, cracked, or missing knobs that control cutting deck height settings.

Pan head screw for lawn tractors and walk-behind mowers. Secures covers, guards, and panels. Replace when stripped, rusted, or missing hardware.