Parts for Mtd E46J: Lawn Mower Parts

Drive bail handle for walk-behind and self-propelled mowers. Mounts to the upper handle assembly. Replace if cracked, bent, or broken for safe operation.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Replace worn spring bell washers causing loose parts or rattling noises. This conical washer cushions heavy loads in lawn equipment. Simple DIY fix.

Adapter plate for lawn mowers. Mounts between components to ensure proper alignment and secure attachment. Replace if cracked, bent, or missing.

Replace a broken torsion spring causing handle slack or engagement issues on your lawn mower. Common DIY repair restores proper tension and operation.

Mower won't move or drive wheels slip? This transmission assembly connects the engine to drive wheels, restoring self-propelled function on walk-behind mowers.

Replacement control handle (bail arm) for walk-behind lawn mowers. Installs on handlebar to engage engine safety. Replace if broken, cracked, or bent.

Replacement discharge chute for 21-inch walk-behind mowers. Directs grass clippings from the deck during discharge. Needed when original is cracked or missing.

Mulch plug assembly for walk-behind mowers. Blocks the discharge chute opening to enable mulching mode. Replace if cracked, broken, or missing.

Hinge pin fastener for lawn mowers. Secures moving components and panels. Replace if bent, missing, or damaged to restore proper attachment and function.

Wheel dust cap for lawn mowers. Covers the wheel hub to protect bearings from dirt and debris. Replace if cracked, broken, or missing from your mower.

Replacement handle adjustment knob for lawn mowers and garden equipment. Secures and allows height adjustments to the upper handle. Order a new one if broken, cracked, or missing.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Rope guide eyebolt for lawn mower recoil starters. Guides the starter rope smoothly during pull starts. Replace if bent, broken, or missing.

Control cable for walk-behind mowers. Connects handle controls to engine or drive system. Replace if frayed, kinked, stuck, or broken for safe operation.

Curved head carriage screw secures upper and lower handles on lawn mowers and garden equipment. Replace if damaged, missing, or no longer holding handles.

Cable mount bracket for gas snowblowers and walk-behind mowers. Secures control cables in place. Replace if cracked, broken, or missing to restore proper cable routing.

Hex screw that secures components on lawn mowers, snow throwers, tillers, and chippers. Replace if stripped, rusted, missing, or damaged during repair.

Secures motor to equipment housing on lawn mowers and small engines. Includes lock washer. 3/8-16 x 1" dimensions. Replace when damaged or stripped.

Shoulder screw fastener for lawn mowers and tractors. Replaces worn, stripped, or missing screws used as pivot points, guides, or mounting pins.

Hex washer head screw for lawn mowers and snow blowers. Replace worn, stripped, or missing fasteners on deck, housing, or engine components.

Height adjustment assembly for walk-behind mowers. Installs on the deck to control cutting height. Replace if cracked, broken, or mechanism worn.

Height adjuster for lawn mowers. Controls blade cutting height settings. Replace if lever is broken, cracked, or won't hold adjustment position securely.

Replace your cracked or damaged 21-inch mower deck. This structural component houses the blade assembly on self-propelled walk-behind mowers.

Rear baffle for 21-inch walk-behind mowers. Directs grass clippings and airflow under the deck. Replace if cracked, bent, or missing for proper cut.

Secures the front baffle to the mower deck. Replace this wing nut if it's cracked, stripped, missing, or no longer holds components firmly in place.

Hex screw for lawn mowers and outdoor power equipment. Secures components and panels. Replace if stripped, rusted, or missing for proper assembly.

Flanged lock nut for mower handles and snowblower chutes. Replace worn, stripped, or missing nuts that allow controlled flex in joints. 3/8" size.

Replace the transmission cover on your walk-behind mower. Protects internal components from debris. Order a new cover if yours is cracked or missing.

Front baffle for lawn mowers. Installs in the deck area to direct airflow and debris. Replace if cracked, broken, or missing for proper operation.

Replacement drive belt for self-propelled walk-behind mowers. Transfers engine power to wheels and blades. Replace if worn, cracked, or slipping.

Wave washer provides cushioning between shaft assemblies in your mower. Replace if missing, damaged, or worn to prevent excessive vibration and wear.

This is a blade adapter assembly for a lawn mower. The blade adapter serves as a mount for the blade allowing it to freely rotate. A mounting bolt and blade support hold the blade in place, with the bolt fastening directly into the blade assembly. This is a genuine OEM part and is sold individually. This part is compatible with several brands, including Cub Cadet, Troy-Bilt, Yard Machines, and Yard Man. Blade adapters should be replaced when they are worn or broken. A broken or sheared key in the blade adapter will cause the blade to loosen. To replace the blade adapter, first disengage the engine and weight the mower down. Prop the cutting blade before positioning a ?-inch socket on the bolt. Then use a mallet to strike it and loosen the mounting bolt. Unthread the bolt and remove the blade support and blade. A mallet or gear puller will help to remove the old adapter. The new blade adapter can then be installed by aligning the key with the slot in the crankshaft and pushing it into place. Replace the blade, cutting edge down, align the support, and rethread the bolt. Secure the blade before torquing the bolt to 30 foot-pounds.

Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.

Hex screw fastener for lawn mower and lawn tractor small engines. Secures components together. Replace if lost, stripped, or corroded during maintenance.

Compression spring for gas walk-behind mowers. Installs in the drive or control mechanism. Replace if worn, broken, or missing to restore proper fit.

This is a height adjuster knob for walk-behind lawn mowers. It attaches to the height adjuster lever. This component is used to adjust the front wheels on the lawnmower deck. This adjustment allows the user to select the desired cutting height of the grass. This component is made out of a hardened foam material that is easy to grip.If the height adjuster knob falls off of the height adjust lever and will not reattach, it is likely that it will need to be replaced. The height adjuster lever itself is sold separately. The repair person may wish to wear gloves when replacing this part.This component is sourced straight from the manufacturer. It is sold individually and is a genuine OEM part. This height adjuster knob is compatible with walk-behind lawnmowers that are manufactured by the Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Craftsman, and Husky brands.

Replacement 8-inch wheel assembly for self-propelled walk-behind mowers. Installs on rear or front axle. Needed when original wheel is cracked or worn.

Replacement screw for gas walk-behind and self-propelled mowers. Secures components and housing panels. Needed when original is stripped or missing.

Fix mower that won't move or has grinding noises with this 14-tooth left-hand spur gear. Essential transmission component for self-propelled models.

Replace your lawn mower's worn or damaged 14-tooth right-hand spur gear. Fits gas walk-behind, self-propelled, and hi-wheel mowers. Order now.

21-inch grass catcher frame for walk-behind mowers. Holds and secures the fabric bag that collects clippings. Replace if bent, broken, or cracked.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

Metal mounting screw for lawn mowers and garden equipment. Secures components together. Replace if stripped, missing, or damaged during repairs.

Handle assembly for push and self-propelled walk-behind mowers. Controls speed, settings, and maneuverability. Replace if cracked, bent, or broken.

Handle bracket assembly for walk-behind mowers. Connects and secures handle components. Replace if bracket is cracked, broken, or won't stay attached.

Dowel pin fastener for lawn mowers and outdoor power equipment. Secures two components together. Replace if damaged, worn, or missing during repairs.

Lower pivot arm assembly for walk-behind mowers. Installs on the drive system. Replace if cracked, bent, or damaged to restore proper wheel engagement.

Pivot arm assembly for walk-behind lawn mowers. Installs on drive system to allow rotation and turning control. Replace if cracked, broken, or worn.

Replacement wheel assembly for walk-behind mowers and lawn equipment. Installs on axle to restore mobility. Order when wheel is cracked, broken, or worn.

Replacement flange lock nut for lawn mowers and garden equipment. Secures parts in place. Order a new nut if yours is stripped, loose, or missing.

Left-hand spring lever for lawn mowers. Installs on the handle assembly. Replace if lever is bent, broken, or missing to restore proper operation.

Rear deflector shield for walk-behind mowers. Mounts to the deck to prevent grass from expelling rearward. Replace if cracked, broken, or missing.

Replacement kit for gas and self-propelled walk-behind mowers. Includes essential components to restore your mower. Order when parts are missing or worn.

Battery won't hold charge or mower won't start? This 12V battery charger restores power to your lawn tractor. Easy plug-in installation in minutes.

Battery won't hold charge or mower won't start? This 12V battery charger restores power to your lawn equipment. Simple plug-in installation.

Fix electrical issues in your walk-behind mower with this wire harness assembly. Connects cables and wires while protecting from damage. Moderate DIY repair.

Countersunk Phillips head screw for lawn mowers and snow throwers. Replaces lost, stripped, or damaged screws. Used to secure various panels.

Lost your mower key? This ignition key set fits most riding mowers, lawn tractors, and snow blowers. Standardized design works across brands.

12-volt battery for gas walk-behind and self-propelled mowers. Replace when engine won't start or cranks slowly. Verify voltage matches your model.

Replacement plastic rivet for lawn mowers and tractors. Secures panels, covers, and trim pieces. Order a new rivet if yours is broken or missing.

Hex head screw for lawn mowers and outdoor power equipment. Replaces damaged, stripped, or missing screws. Essential for secure assembly and repairs.