Parts for Weedeater 358161: Lawn Mower Parts

This replacement control bar is a genuine OEM replacement part intend for use on push lawn mowers. A control bar connects to the handle of a push lawn mower and acts as a safety mechanism. To start a push mower's engine, the control bar must first be held tightly against the handle, and if released, it will cut the engine. This keeps the Lawn Mower from causing any damage if the user loses control going up a hill or over rough terrain. Although control bars are not usually in a position where they are easily damaged, they can be bent or broken if accidentally smashed against a wall. This can happen because of the angle they sit at when not in use. A bent control bar can cause the engine to not engage, so it will need replacing before the push lawn mower can be used again. Replacing a control bar is an easy job and does not require extra tools. This part is made of black steel and is suitable for Weed Eater, Poulan, and Husqvarna appliances and is sourced from its original manufacturer. This part ships individually.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This is a mulcher plate that is intended for use with many different models of lawn mowers. This piece is sometimes called a mulching door. The plate is used as a means to help keep the grass beneath the deck of the mower. This can help to ensure that the smaller clippings will decompose, which can provide the soil with the nutrients it needs. It will attach over the side discharge chute, where it can be opened or closed.The mulcher plate is durable, but it could still become damaged. In some cases, it might be damaged during use. Over time, there is a chance that the plastic could eventually crack. If it is not working properly, it will not mulch properly. Owners can quickly and easily replace the mulching door.The mulcher plate will work with certain models from Weed Eater, Husqvarna, Poulan, Craftsman, Murray, and Ryobi. This piece is sold individually. This is a genuine OEM replacement part sourced from the manufacturer.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This axle arm assembly is a genuine Husqvarna part, sold individually. This axle arm assembly can be used as a replacement part in a lawn mower. The purpose of an axle arm assembly in a lawn mower is to facilitate the free range of motion of the axle assembly so that the axle can generate motion and rotation in the wheels of the appliance for the operator to drive it across a variety of surfaces while in use.If the axle arm assembly is subject to damage from general wear and tear with long-term use or to a collision with a hard object such as a rock or a curb, the axle arm assembly should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This axle arm assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Murray, and Ariens.

This replacement part is an axle assembly. It is a genuine replacement part made by Husqvarna. The axle assembly typically assists the wheels or other devices in rotating in the proper direction during use. A new axle assembly might be needed if the user notices that the wheels in the appliance are not rotating smoothly or at all. It is possible that after a long time the axle parts can become worn down or stripped due to normal wear and tear. If this is the case. it is recommended that the user replace this part as soon as possible. Refer to the user manual for more information on how to replace this part. This axle assembly is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This part is a replacement torsion spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current torsion spring is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn mower models.Springs help to ensure that the mower can work as intended but are also a part that is subject to significant wear and tear. Torsion springs may become stretched, bent, corroded, or broken and thus will require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting any repairs. For more accurate information on how and where to install this torsion spring, the appropriate owner's manual and equipment diagrams should be referred to. This torsion spring is suitable for use on a variety of lawn mower models manufactured by Husqvarna, Poulan, other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

This height adjuster knob is for lawn mowers. It attaches to the mower's height adjuster lever to adjust the lawn mower deck to the desired cutting height. Adjusting the lawn mower height ensures that the lawn is cut to the proper mowing height. The correct mowing height for a lawn depends on multiple factors, such as the type of grass species and the time of year. Height adjuster levers are typically made of metal, so the slightly rubberized height adjuster knob protects the operator during the adjustment process. The height adjuster knob's flat surface also prevents slippage during the adjustment process. The knob slides onto the lever and attaches without any clips, retainers, or screws. To remove the knob, pull it off. It might be challenging to remove. Due to the location of the height adjuster knob, wearing gloves is recommended when replacing the knob. This knob is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers made by Craftsman, Husqvarna, Weed Eater, Poulan, and Murray.

This is a replacement shoulder bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or misplaced bolt on a variety of different lawnmower models. This bolt is a standard piece of hardware and has multiple varying uses. When replacing standard hardware, it's important to use OEM parts, such as this bolt, to ensure high quality and longevity. If using this bolt on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where this shoulder bolt can be used, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this shoulder bolt is suitable for use on several different lawnmower models and small engine power equipment manufactured by Husqvarna, Poulan, WeedEater, Murray, Craftsman, and others. This is a genuine part made of high-quality, durable metal and is sold individually.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This lock nut is a genuine Husqvarna part, sold individually. This lock nut can be used as a replacement part in lawnmowers, snowblowers, and tillers. The purpose of a lock nut for one of these small engine outdoor appliances is to serve as a fastening component in conjunction with a bolt.The lock nut in a small engine outdoor appliance is a small component that can be easily lost or misplaced at any point within the typical lifespan of the appliance. The lock nut can also suffer damage that can reduce or negate its functionality, in which case the lock nut should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lock nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Murray, and Ariens.