Parts for Weedeater 388161: Lawn Mower Parts

This replacement control bar is a genuine OEM replacement part intend for use on push lawn mowers. A control bar connects to the handle of a push lawn mower and acts as a safety mechanism. To start a push mower's engine, the control bar must first be held tightly against the handle, and if released, it will cut the engine. This keeps the Lawn Mower from causing any damage if the user loses control going up a hill or over rough terrain. Although control bars are not usually in a position where they are easily damaged, they can be bent or broken if accidentally smashed against a wall. This can happen because of the angle they sit at when not in use. A bent control bar can cause the engine to not engage, so it will need replacing before the push lawn mower can be used again. Replacing a control bar is an easy job and does not require extra tools. This part is made of black steel and is suitable for Weed Eater, Poulan, and Husqvarna appliances and is sourced from its original manufacturer. This part ships individually.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This replacement part is a mulch door intended for use in lawn mowers. It closes the discharge chute so that grass cuttings can be recut and turned into mulch.The mulch door can become damaged from impact. If bent or worn out, it may become stuck or fall out of place, necessitating replacement.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This replacement part is an axle assembly. It is a genuine replacement part made by Husqvarna. The axle assembly typically assists the wheels or other devices in rotating in the proper direction during use. A new axle assembly might be needed if the user notices that the wheels in the appliance are not rotating smoothly or at all. It is possible that after a long time the axle parts can become worn down or stripped due to normal wear and tear. If this is the case. it is recommended that the user replace this part as soon as possible. Refer to the user manual for more information on how to replace this part. This axle assembly is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This part is a discharge guard designed to fit on lawn mowers built by Craftsman. The discharge guard fits on the right side of the cutting deck and guides the ejected grass clippings out the right side of the mower. Because they protrude several inches away from the mower, it is common for discharge guards such as these to be banged against fences, trees, curbs, and other fixed objects. While the guard is constructed of resilient plastic, it can be cut or the slots used to fix it to the mower may be torn, causing the grass to be incorrectly discharged. Replacement of the discharge guard is a simple matter since no hardware is involved. Simply lift off the old guard, removing it from the slots in the attachment housing. The new guard should settle onto the slots and provide an immediate perfect seal. Should replacing the side discharge guard become necessary, it is essential to use an OEM certified replacement that is, like this one, identical to the manufacturer's original part. This discharge guard is compatible with mowers offered by Weed Eater, Ariens, Craftsman, Poulan, and Husqvarna.

This height adjuster knob is for lawn mowers. It attaches to the mower's height adjuster lever to adjust the lawn mower deck to the desired cutting height. Adjusting the lawn mower height ensures that the lawn is cut to the proper mowing height. The correct mowing height for a lawn depends on multiple factors, such as the type of grass species and the time of year. Height adjuster levers are typically made of metal, so the slightly rubberized height adjuster knob protects the operator during the adjustment process. The height adjuster knob's flat surface also prevents slippage during the adjustment process. The knob slides onto the lever and attaches without any clips, retainers, or screws. To remove the knob, pull it off. It might be challenging to remove. Due to the location of the height adjuster knob, wearing gloves is recommended when replacing the knob. This knob is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers made by Craftsman, Husqvarna, Weed Eater, Poulan, and Murray.

This is a replacement shoulder bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or misplaced bolt on a variety of different lawnmower models. This bolt is a standard piece of hardware and has multiple varying uses. When replacing standard hardware, it's important to use OEM parts, such as this bolt, to ensure high quality and longevity. If using this bolt on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where this shoulder bolt can be used, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this shoulder bolt is suitable for use on several different lawnmower models and small engine power equipment manufactured by Husqvarna, Poulan, WeedEater, Murray, Craftsman, and others. This is a genuine part made of high-quality, durable metal and is sold individually.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of the hinge rod in a lawnmower is to affix the discharge guard to the mulching plate so that the two components are stably mounted to the appliance while in use.The hinge rod in a lawnmower is a small component that can be easily lost or misplaced; additionally, the hinge rod can suffer damage from general wear and tear with long-term use or as a result of collision with a hard object. If any of these things occur to the hinge rod, the hinge rod should be replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Ariens.

This is a blade for a walk-behind lawnmower. A new walk-behind lawnmower blade may be needed if the original is cracked, broken, or damaged in any way. The lawnmower blade can become damaged if it hits a rock, a curb, a landscape block, or other hard objects. It is essential to use extreme care and caution while performing care and maintenance or replacing the lawnmower blade as it can cause serious injury. Wear gloves to protect hands during the replacement process.This lawnmower blade is a genuine OEM Husqvarna part. It is sold individually. This specific lawnmower blade is compatible with walk-behind lawnmowers that are manufactured by the Husqvarna brand and the Jonsered brand.