Parts for Speed Queen ASGE8AGW113TW01: Loading Door-With Window Parts

This dryer door assembly replaces a damaged or worn commercial dryer front door with a viewing window to restore safe operation and a finished appearance. It keeps laundry visible while securing the drum area and sealing the cabinet. What it does

• Replaces a cracked, dented, or warped dryer front door that won't close properly
• Restores the door seal to help maintain proper airflow and drying performance
• Provides a clear viewing window to monitor loads without opening the door
• Helps eliminate rattles or gaps caused by a damaged door hinge or panel

• Disconnect power to the machine before attempting service
• May require two people for safe handling and alignment of the door assembly
• Inspect hinge mounting points and latch for wear; tighten fasteners as needed during install

A replacement wedge for the door handle that restores a secure grip and smooth door operation. Fits the white trim area of the handle assembly to replace cracked, broken, or worn wedges and improve door feel. What it does:

• Replaces a damaged or missing wedge piece that holds the door handle trim in position.
• Restores a stable gripping surface so the door opens and closes without slipping.
• Helps correct symptoms such as a loose, cracked, or partially detached handle wedge.
• Matches the white finish used on the handle trim for a consistent appearance.

• One white wedge door-handle piece as shown

• Disconnect power to the appliance before starting any repair.
• Installation typically requires basic hand tools; remove the handle/trim to access the wedge.
• Align the wedge and snap or fasten into place without forcing; avoid over-tightening fasteners.

This is a replacement window door package designed to restore the washer door assembly so you can safely view cycles and keep the front of the machine sealed during operation. It replaces a worn, cracked or cloudy door assembly. What it does

• Provides a clear viewing window so you can check load condition without opening the washer
• Replaces cracked, damaged, or cloudy door panels that can obstruct visibility
• Helps maintain the front seal area to reduce splash and water escape during cycles
• Restores proper door fit and operation when worn or damaged components affect closure

• One window door package

• Disconnect power and water, and follow the manufacturer's service manual before starting
• Basic tools typically required; some models may need trim/clips removed to swap the assembly
• Inspect door gasket and latch during replacement; replace if damaged to ensure a proper seal

This door strike bracket mounts to the cabinet and positions the door strike so the door latches securely and the machine recognizes a closed door. Replace a bent or broken bracket to restore proper door alignment and reliable starts.

• Supports and aligns the door strike with the latch/lock assembly
• Ensures the door switch/interlock is engaged when the door is shut
• Helps prevent nuisance "door open" messages and cycles that won't start
• Direct replacement for a damaged, bent, or missing bracket

• Disconnect power before servicing; shut off water or gas supplies if applicable
• Open the door and access the bracket from the front panel area
• Note bracket orientation; transfer and install using existing hardware; align before tightening
• After reassembly, the door closes firmly and the machine starts without a door error

Sturdy metal door strike that mates with the latch/lock on your machine's cabinet. It keeps the door closed and engages the door switch so cycles can start and run without nuisance stops.

• Interfaces with the door latch/lock mechanism to secure closure
• Engages the door switch/interlock so the appliance can start and continue running
• Restores proper door alignment and latch feel after wear or bending
• Typical symptoms: door won't latch or pops open; unit won't start/run; intermittent stopping mid-cycle; visible damage to the strike

• Unplug the appliance (and shut off gas to gas dryers) before servicing
• Remove the existing strike and retain mounting hardware; note orientation
• Install the new strike in the same position; tighten screws and verify alignment
• Close the door to confirm smooth latching and proper operation

This is a 8-16 x 5/8 tapping screw with a #6 Phillips drive, used to fasten panels and components on compatible appliances. It provides a secure, low-profile hold for trim, brackets and covers. What it does:

• Secures panels, trim pieces, brackets or small components to the appliance frame
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps maintain proper alignment and fit of exterior or interior panels
• Provides a threaded connection in sheet metal or tapped holes

• Use the correct #6 Phillips screwdriver or bit to avoid stripping the head
• Start threading by hand to ensure alignment, then tighten until snug — do not overtighten
• Replace stripped or damaged screws to ensure secure fastening
• Wear eye protection and disconnect power to the appliance before working on components

This door liner seal provides a watertight barrier between the washer door and tub, helping prevent leaks and keeping laundry contained during cycles. Designed as a direct-replacement service part for compatible Speed Queen front-load washers. What it does:

• Seals the gap between the door and the tub to stop water from escaping during wash and rinse cycles
• Helps maintain proper drum containment and reduces water on the door opening
• Commonly replaced when you see visible wear, tearing, or persistent leaking from the door area
• Compatible with OEM door assembly designs that use a packaged liner seal

• Follow manufacturer instructions for proper seating and clamping
• Inspect surrounding door boot and latch for damage; replace if worn to ensure a proper seal
• Disconnect power and water supply before starting work to reduce risk of shock or flooding
• Test with a short cycle and check for leaks after installation

This grill door liner is the inner-facing trim piece that restores the dryer/grill door's appearance and protects the door opening from wear. It replaces cracked, warped, or discolored liners to give a clean, finished look. What it does:

• Covers and protects the door opening edge from heat, lint, and everyday wear
• Restores a smooth, uniform interior door surface after damage or discoloration
• Helps keep the door seal area aligned and reduces gaps where lint or debris can collect
• Improves appliance appearance when the original liner is cracked, warped, or peeling

• One grill door liner (white)

• Designed to fit the original mounting points; inspect existing hardware and retain any reusable clips/screws
• Turn off and unplug the appliance before starting work; allow surfaces to cool
• Use basic hand tools; avoid forcing the liner into place to prevent cracking

This door hinge secures and lets the appliance door pivot smoothly, restoring proper alignment and reliable opening/closing. A direct-fit replacement designed to return worn or damaged hinges to correct function. What it does:

• Supports the door and provides a pivot point for opening and closing
• Restores proper door alignment and prevents sagging or uneven gaps
• Helps the door latch and seal correctly by maintaining hinge position
• Common symptom fix: loose, noisy, tilted, or non-closing door

• Disconnect power and water before beginning any repairs
• Support the door during removal/installation to prevent dropping or damage
• Use the factory mounting screws and torque to OEM spec; replace damaged fasteners
• If alignment or latch issues persist after install, check strike and door seal for wear or damage

This trim window is the exterior door trim piece that surrounds the dryer's viewing window and provides a finished appearance while protecting the glass edge. It restores a secure, clean fit and prevents sharp edges from being exposed. What it does:

• Covers and secures the perimeter of the door glass to keep the window seated and protected.
• Helps maintain a tight seal around the glass to reduce vibration and rattling.
• Restores proper door appearance after a cracked, warped, or missing trim.
• Reduces risk of glass chipping at the edge by providing a protective barrier.

• One trim window door trim piece (single).

• High-level replacement; door removal may be required.
• Disconnect power to the appliance before starting any repairs.
• Handle glass and trim carefully to avoid damage or injury; use gloves and eye protection.
• If glass is cracked or loose, replace glass and mounting hardware as needed.