Parts for Ge CTS92DM2N2S5: Lower Door Parts

This handle spacer positions and supports the appliance door handle to maintain proper gap and alignment, helping the handle sit securely and function smoothly. Fits where the handle meets the door to prevent binding or rubbing. What it does:

• Provides an even gap between the handle and door for correct handle alignment
• Stabilizes the handle to reduce movement and rattling during use
• Prevents the handle from contacting the door surface and causing wear
• Helps restore proper handle feel when the original spacer is cracked or missing

• One handle spacer

• Disconnect power to the appliance or remove batteries where applicable before beginning work
• Remove the handle fasteners, position the spacer, then reinstall fasteners; do not overtighten
• Inspect mating surfaces for damage and replace any stripped screws or broken handle parts

This oven door insulation panel fits inside the oven door to help contain heat for more even cooking and protect the outer door surface. It replaces worn or missing insulation to reduce heat loss and improve oven performance. What it does:

• Helps retain oven cavity heat for more consistent baking and roasting
• Reduces heat transfer to the outer door, improving user safety
• Limits heat loss from the oven cavity that can cause longer cook times
• Restores proper door sealing alignment when insulation is compressed or missing

• Disconnect power (and gas if applicable) before starting any repair
• Remove the oven door or inner door panel to access insulation
• Wear gloves to protect against sharp edges and insulation fibers
• Reinstall panels and check door fit and seal before returning the oven to service

This oven door gasket forms the heat-sealing seal around the oven door to help keep heat and cooking odors in the oven cavity for more even cooking. It replaces worn, torn, or deformed seals to improve oven performance. What it does:

• Seals the oven door to reduce heat loss and help maintain consistent cooking temperatures.
• Helps prevent smoke or odors from escaping the oven cavity during use.
• Reduces energy waste caused by oven heat leaking around the door.
• Commonly replaced when the gasket is cracked, compressed, burnt, or shows visible gaps.

• One oven door gasket as shown.

• Remove power to the appliance and allow the oven to fully cool before servicing.
• Inspect the gasket channel and clean debris before installing the new gasket for a proper seat.
• Press the gasket into the door channel, working around the perimeter to ensure an even fit; some gaskets may be secured with clips or adhesive—follow the oven's service instructions.

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.

This 1/4-20 hex nut secures threaded studs and bolts on appliances, providing a simple, reliable fastening point to keep panels, brackets, and components in place. Ideal for repairs where a worn or missing nut causes looseness or rattling. What it does:

• Fastens to 1/4-20 threads to lock panels, brackets, or assemblies together
• Restores secure mounting where a stripped, corroded, or missing nut causes movement
• Helps stop vibration-related noise by holding parts tightly
• Small hardware solution used in many appliance fastening applications

• One 1/4-20 hex nut

• Use the matching 1/4-20 bolt or stud; thread fit before tightening
• Hand-start the nut to avoid cross-threading, then tighten with the appropriate wrench
• Do not overtighten to prevent stripping threads or damaging components
• Disconnect power and follow appliance-specific safety instructions before working

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.