Parts for Dacor EORD227B: Lower Oven Parts

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

The Broiler is an OEM component specifically designed for Samsung wall ovens and ranges. It is responsible for delivering intense heat from above to broil or brown foods evenly. 

Symptoms of a bad broiler include:

• Inconsistent or uneven browning of foods
• Slow or inefficient broiling that causes meats to dry out  
• Limited temperature control or settings
• Potential fire hazard caused by aged or damaged coils

Causes of broiler failure can be excessive use over time which degrades the broiler coils and heating elements. Without proper maintenance, food residue may accumulate and decrease performance as well.

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

The Sewing Machine Meat Probe Socket is a vital component for your Samsung mechanical sewing machine. This genuine OEM part ensures a precise fit and reliable performance, maintaining the integrity of your sewing equipment. Designed specifically for Samsung models, it seamlessly integrates with your machine, providing stable connections for the meat probe system. The Sewing Machine Meat Probe Socket enhances the accuracy and efficiency of your sewing tasks, allowing for smooth and consistent operation. Made from durable materials, this part withstands regular use, ensuring long-lasting functionality and reducing the need for frequent replacements. Installing this genuine OEM part is straightforward, helping you quickly restore your sewing machine to optimal condition. Whether you are repairing a worn-out socket or upgrading your machine, the Sewing Machine Meat Probe Socket offers dependable quality and performance. Choosing this genuine OEM part guarantees compatibility and peace of mind, so you can focus on your creative projects without interruption. Enhance your sewing experience with this essential, customer-focused component.

This meat probe socket is the oven probe jack that accepts the temperature probe plug, restoring the oven's ability to read food temperature and complete probe-based cooking cycles. It helps return proper probe connection and temperature sensing. What it does:

• Provides the electrical connection point for the oven's meat/temperature probe
• Allows the oven control to detect and monitor probe temperature during cooking
• Replaces a worn, loose, or damaged socket that can cause intermittent probe detection
• Can resolve probe-related errors or failures to register probe temperature

• Disconnect power to the range or oven before beginning any repair
• Handle wiring and connectors carefully; ensure correct orientation when installing
• Reconnect power and test probe detection and oven functions after installation

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

This convection fan is the replacement blower used in Samsung service washer/dryer convection systems to move air for drying and temperature circulation, restoring proper airflow for more even drying performance. What it does

• Circulates hot air through the convection/drying chamber to aid moisture removal and even heat distribution
• Helps maintain designed airflow so cycles reach intended temperatures and dry times
• Failing or noisy fan can cause reduced drying performance, longer cycles, or unusual noises
• Replacing a worn fan can stop rattling, scraping, or vibration caused by damaged blades or bearings

• One convection fan assembly

• Disconnect power before servicing; this part is installed behind access panels and may require basic hand tools
• Handle fan blades carefully to avoid damage; confirm alignment and secure mounting for proper operation
• If replacing due to noise, inspect surrounding shrouds and mounting hardware for wear or debris

This convection fan blade kit replaces a damaged or worn fan blade in a convection oven to restore air circulation for more even cooking and efficient heat distribution. Designed as a direct-fit service kit. What it does:

• Circulates hot air in the oven cavity to support even baking and roasting
• Replaces cracked, bent, or missing fan blades that can reduce convection performance
• Helps reduce overheating or cold spots that cause uneven cooking
• Can resolve fan-related noises caused by damaged blades

• One convection fan blade kit

• Disconnect power to the appliance before beginning any service
• Allow the oven to cool completely; use proper protective gloves for sharp edges
• Installation generally requires basic hand tools and removal of the rear or rear interior panel