Parts for Ge GPE12FSKESB: Machine Compartment Parts

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This drain tray catches and channels defrost and condensation water away from the refrigerator cabinet to prevent puddling and floor damage. It replaces a cracked, warped, or clogged drip pan to restore proper drainage. What it does:

• Collects defrost water from the evaporator and guides it to the drain path
• Prevents water from pooling under the appliance and reduces risk of leaks
• Helps control odors by keeping standing water from accumulating
• Fits under the refrigerator base where the original pan was installed

• One drain tray

• Disconnect power before servicing and pull the refrigerator away from the wall to access the pan
• Remove any access grille or kickplate per your model's service instructions
• Inspect and clear the drain tube and surrounding area before reinstalling the tray
• Reinstall panels and restore power; check for proper drainage during the next defrost cycle

This is a replacement mounting screw used to secure components and trim on compatible GE appliances. Installing the correct screw restores secure fits and prevents rattling or loose parts for reliable operation. What it does

• Secures panels, brackets, trim pieces or components in place
• Prevents vibration-related noise by keeping parts tight
• Restores proper alignment where a lost or damaged screw caused looseness
• Matches OEM fastening point to maintain fit and function

• One mounting screw as shown

• Use the matching driver and size to avoid stripping the head or threads
• Tighten until snug; avoid over-torquing which can damage parts or plastic mounts
• Disconnect power or follow appliance-specific safety steps when accessing internal areas

The R600 Process Valve with Red Cap is an OEM part for GE refrigerators. It regulates the flow of refrigerant within the cooling system, ensuring proper cooling and temperature control.

A bad process valve can occur due to wear and tear, refrigerant leaks, or mechanical failure. If you notice symptoms such as inadequate cooling, excessive frost buildup, or unusual noises coming from the refrigerator, it may indicate a faulty or malfunctioning process valve.

Symptoms of a bad process valve include:

• Inadequate cooling or inconsistent temperature control
• Excessive frost buildup in the freezer
• Unusual noises coming from the refrigerator

Restore your refrigerator by replacing the faulty process valve with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.