Magic Chef Microwave Parts

The 40W Light Bulb is an OEM replacement part for Whirlpool microwave ovens. It is a standard-size bulb designed to provide illumination inside the microwave cavity, allowing you to easily view and monitor the cooking or reheating process.

Symptoms of a faulty microwave light bulb include:

• Dimming or flickering light during operation
• Complete bulb failure or no illumination within the cavity
• Discoloration or physical damage to the bulb itself

Causes of a bad microwave light bulb can include normal wear and tear over time, electrical surges or voltage fluctuations, or physical impact or vibration during use.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave oven models.

The Fuse is an OEM part for Whirlpool microwaves. It is a crucial safety component designed to protect the microwave from electrical surges and potential short circuits by breaking the circuit if the current flow exceeds safe levels.

Causes of a bad microwave fuse can include electrical surges, faulty wiring, or normal wear and tear over time. A blown fuse will render the microwave inoperable, as it cuts off the power supply to prevent further damage or hazards.

Symptoms of a bad microwave fuse include:

• The microwave not powering on
• The microwave stopping mid-operation
• No response from the control panel or keypad
• Sudden loss of power during use

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: chrome. Size: 7 5/8 x 5 inch. For charcoal grease filter use 4359331.

This replacement mounting screw secures appliance panels and components to restore proper fit and reduce rattling. Use when a damaged or missing screw causes loose trim, gaps, or vibrating noises; order by part number to ensure a match. What it does:

• Fastens panels, brackets, or trim to keep parts aligned and secure.
• Stops vibration and rattling caused by loose or missing screws.
• Common symptoms: visible gaps, loose panels, hardware falling out, or excess noise.
• Use the part number and/or existing screw to ensure correct size and thread before ordering.

• Disconnect power and water before accessing internal components.
• Use the correct screwdriver or bit to avoid stripping the head.
• Turn until snug; avoid over-tightening which can strip threads or crack trim.
• Keep small parts away from children and pets during repair.

Color: White

This 15 amp, 250 volt replacement fuse protects your appliance's electrical circuits by interrupting power when a fault or overload occurs. It restores safe operation once the underlying issue is fixed and the fuse is replaced. What it does:

• Acts as an overcurrent protection device for circuits rated up to 15 A and 250 V
• Prevents damage to wiring and components by opening the circuit during an overload or short
• Common symptom: appliance has no power or specific functions stop working after a sudden failure
• Replacing a blown fuse can resolve intermittent power loss or complete power failure tied to a single blown element

• Disconnect power to the appliance before inspecting or replacing the fuse
• Replace only with a fuse of the same amperage and voltage rating to maintain safety and proper protection
• Use insulated tools and avoid touching live terminals; internal access may require disassembly, follow OEM service instructions
• If fuses blow repeatedly, stop using the appliance.

Color: White. Size: 13 oz. Spray paint primer. can.

This noise filter / fuse assembly helps reduce electrical interference and provides protective interruption during a fault, improving the stability of control electronics and reducing audible or electronic interference in the appliance. What it does:

• Filters EMI/RFI that can cause display flicker, control erratic behavior, or audio interference.
• Acts as a protective fuse/thermal link to interrupt power if an electrical fault occurs.
• Failure may cause intermittent power, controls that reset or act unpredictably, buzzing, or error codes.
• Restores cleaner power to control boards and sensors when replaced with a matching assembly.

• Always disconnect power to the appliance before attempting service.
• Replace in the original mounting location and reconnect wires to the correct terminals.
• Do not operate the appliance with safety devices removed.

This motor-stator assembly provides the stationary magnetic core for the appliance's drive motor, restoring magnetic coupling so the motor can generate torque. Useful when the motor hums, fails to spin, or produces intermittent movement. What it does:

• Forms the stationary magnetic field the rotor needs to turn, enabling normal motor operation
• Restores drive function when the motor hums without spinning or runs weakly
• Can resolve intermittent start/stop or reduced torque issues tied to the motor assembly
• Works as the matched stationary component for the corresponding motor/rotor

• Always disconnect power before inspecting or replacing motor components.
• Handle wiring and connectors carefully; match original terminals and routing.
• Some motors are sealed assemblies and may require partial disassembly.
• Test the appliance after installation to confirm proper operation and secure mounting.

This fuse block is the appliance electrical terminal used to secure and connect a fuse or wire harness, restoring a safe electrical path for heating and motor circuits. It helps maintain reliable power transfer inside the appliance. What it does:

• Provides a secure mounting point and electrical connection for a fuse or inline connection
• Enables proper power flow between the control and high-voltage components
• Can cause loss of power, intermittent operation, or heating issues when damaged or corroded
• Replaces a worn, cracked, or melted terminal block to restore safe connections

• Disconnect power to the appliance before starting any work
• Handle wiring carefully; secure all splices and fasteners to manufacturer torque recommendations