Parts for Bosch NET8068UC/01: Main Asy Parts

This glass-ceramic hob top replaces a cracked or damaged cooktop surface to restore a smooth, clean cooking area and proper support for cookware. Designed to match OEM fit and appearance for compatible Bosch cooktops. What it does:

• Replaces a broken, scratched or chipped glass-ceramic cooking surface
• Restores a continuous, heat-resistant surface for burners and cookware
• Helps prevent heat and spills from reaching internal components
• Improves appearance and usability of the cooktop

• One glass-ceramic hob top

• Disconnect power to the appliance before attempting service
• Handle with care — glass-ceramic can chip or crack if dropped or stressed

The Sealing Strip is an OEM part for Bosch cooktops. This part creates a tight seal between the cooktop and the countertop. This sealing strip prevents spills and crumbs from entering the gap between the cooktop and the installation surface, which helps maintain the cleanliness and functionality of the kitchen workspace.

Causes of damage to the sealing strip can include prolonged exposure to heat and moisture, as well as physical impacts from cleaning or cooking activities. 

Symptoms of a bad Sealing Strip include:

• Visible gaps or looseness along the edges of the cooktop, which can allow food particles and liquids to seep through.
• Degradation or hardening of the seal material, which reduces its effectiveness and can lead to damage to the surrounding countertop.
• Accumulation of debris or moisture under the cooktop, potentially leading to mold or mildew issues.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This electronic control module replaces the dishwasher's main logic board to restore normal cycle control and user interface response. It manages wash cycles, timing, and communication between sensors and actuators for reliable operation. What it does:

• Receives commands from the user interface and runs programmed wash cycles
• Controls pump, heater, valves and motor timing for proper washing and draining
• Monitors sensors and reports faults that can stop or pause cycles
• Commonly replaces a board when the dishwasher won't start, cycles stop unexpectedly, or the control is unresponsive

• 1 control module

• Disconnect power at the breaker before accessing the control or inner door panels
• Handle the board by edges and avoid static discharge; use antistatic precautions if available
• Installation typically requires removing the inner door panel and disconnecting wire harnesses; keep fasteners organized

This relay module is a replacement control relay that helps switch high-current circuits inside the appliance, restoring reliable power routing and control. Use it to replace a failed relay assembly and get the unit responding to control-board commands. What it does

• Switches power to key components (motor, compressor, heater or pump) when commanded by the control system
• Restores proper on/off operation when a burnt or stuck relay prevents component startup
• Stops intermittent power loss or clicking caused by a failing relay contact
• Helps eliminate symptoms like no-run, no-heat, or no-pump when the control board is otherwise functional

• One relay module

• Disconnect power to the appliance before starting any work to avoid shock or damage
• Label or photograph wire connections before removal to ensure correct reassembly
• Use appropriate tools; avoid bending or stressing connector pins when installing

This cable harness is the factory wiring bundle that routes power and signals between appliance components, restoring reliable electrical connections for proper operation and control. Use it to replace damaged or worn wiring assemblies. What it does

• Connects control board, sensors, motors and switches so components communicate and receive power
• Replaces frayed, melted or broken wires that cause intermittent or no operation
• Helps stop electrical arcing, shorts or blown fuses caused by damaged wiring
• Can resolve symptoms such as no power to components, intermittent operation, control errors or non-responsive controls

• Disconnect power before starting and verify the appliance is de-energized
• Note connector orientation and routing before removal; take photos if helpful
• Handle terminals and connectors carefully to avoid bending pins or loosening crimps

This heating element heats dishwasher wash and rinse water and helps enable proper drying and sanitizing cycles. It restores the unit's ability to reach and maintain appropriate wash temperatures for cleaning performance. What it does:

• Warms wash and rinse water so detergents and sanitizing cycles work effectively
• Supports drying performance by raising internal temperature during final cycles
• Stops producing heat when the element is burned out, causing poor cleaning or no drying
• Can cause error codes or interrupted cycles if the element or its connections fail

• One heating element assembly

• Disconnect electrical power and water supply before servicing
• Handle the element and ceramic insulators carefully to avoid damage
• Verify correct fit and connection orientation for your model; secure wiring and seals

This heating element assembly provides the heating source for the appliance, restoring normal temperature output for drying/heating cycles. Replaces a worn or failed element to help recover proper operation and cycle performance. What it does

• Heats air or water as part of the appliance's main heating circuit.
• Restores normal cycle temperatures when the original element has failed.
• Can resolve symptoms such as no heat, extended cycle times, or temperature-related error codes.
• Works with the appliance's thermostat and safety cutouts to maintain safe operating temperature.

• Disconnect power (and gas supply, if applicable) before starting any repair.
• Handle with care to avoid damaging terminals, terminals insulation, or mounting brackets.
• Inspect surrounding wiring, connectors, and thermal cutouts; replace any damaged components.
• After installation, verify proper operation by running a test cycle and checking for correct heat and no unusual smells or noises.

A small chassis knockout protector that shields wiring and components where factory knockout holes are removed. Helps prevent wire abrasion and keeps openings tidy for safe appliance operation. What it does:

• Fits into a chassis knockout to protect wiring from sharp sheet-metal edges
• Helps prevent cable chafing and short circuits by covering exposed openings
• Keeps out debris while allowing routed harnesses to pass through the cabinet
• Commonly used where service or modifications require a sealed knockout

• One chassis knockout protector

• Install by pressing the protector into the knockout until it seats securely
• Ensure wiring is routed through the protector and not pinched between metal edges
• Disconnect power before servicing appliance to avoid shock or injury

Razor blade with cooktop cleaner