Parts for Kenmore 790.32699410 (79032699410, 790 32699410): Main Top Parts

This replacement cooktop grate provides a stable, elevated surface for cookware and restores proper pot and pan support on gas ranges. It helps ensure even heating and safer cooking by keeping cookware centered over the burner. What it does:

• Supports cookware above the burner for stable, consistent cooking
• Directs heat and protects the cooktop surface from direct flame contact
• Reduces wobbling or sliding caused by a cracked, warped, or missing grate
• Restores proper clearance and alignment for burner flames

• Install on a cool, powered-off cooktop; make sure burners are completely off and cool before handling
• Position grate so it sits flat and aligns with the burner ports
• Check for proper seating after installation to avoid wobble or instability during use
• If grate is damaged or glazed, replace it to maintain safe, stable cookware support

The Range Cap is an OEM part for Frigidaire ranges. It seals the upper combustion chamber to contain heat from the oven burners. A tight-fitting cap is critical for efficient, safe oven performance.  This cap measures 3 inches in diameter.

Causes of a bad cap can include cracks, warping, or collapsed seals from prolonged exposure to high oven temperatures. Accidental damage during past maintenance is also possible.

Symptoms of a bad cap include:

• Escaping heat from the oven chamber, reducing efficiency
• Flames or sparks visible around the cap during baking
• Loose, wobbly, or missing cap allowing grease and debris in the combustion area

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Range Cap is an OEM part for Frigidaire ranges and cooktops. This cap covers the burner head, protecting it from spills and ensuring an even distribution of heat. It is designed to fit securely over the burner, maintaining both the efficiency and safety of the cooking process.

Causes of a bad range cap include cracking, chipping, or discoloration from repeated use, which can compromise its function and appearance.

Symptoms of a bad range cap include:

• Uneven flame distribution
• Visible cracks or chips
• Discoloration or burnt spots
• Difficulty in fitting the cap securely over the burner

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Burner Cap is an OEM part for Frigidaire cooktops and ranges. It is designed to cover the burner head, ensuring an even distribution of the flame for efficient cooking. The burner cap also protects the burner head from spills and debris, which can affect performance.

You should replace the burner cap if it becomes damaged or worn out. Causes of a bad burner cap can include exposure to high heat, buildup of food residue, or accidental impacts. A compromised burner cap can lead to uneven flames, inefficient cooking, or difficulty in lighting the burner.

Symptoms of a bad burner cap include:

• Uneven or yellow flames
• Difficulty in igniting the burner
• The burner cap being cracked, chipped, or discolored
• Poor cooking performance or hotspots on cookware

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Surface Burner Cap is an OEM part for Frigidaire gas ranges. It sits atop the surface burner and helps to distribute the gas flame evenly for consistent cooking performance. The cap also protects the burner head from spills and debris.

You should replace this surface burner cap if it becomes damaged or worn out. Signs of damage include chipping, cracking, or discoloration due to prolonged exposure to high temperatures or cleaning agents.

Symptoms of a bad surface burner cap include:

• Uneven or unstable flame
• Difficulty in igniting the burner
• Visible cracks or chips on the cap
• Food cooking unevenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement door gasket creates a tight seal around the refrigerator or freezer door to help maintain interior temperature and reduce energy loss. It restores proper door closure for better cooling and frost prevention. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain consistent internal temperatures for food safety
• Reduces frost build-up and compressor runtime due to air leaks
• Restores proper door alignment and closing performance

• Remove old gasket and clean the door mating surface before installing the new gasket
• Start installation at a corner and work around the door to ensure an even fit
• Gasket may be warmed slightly (hot water or hair dryer on low, if needed) to improve flexibility for positioning
• Unplug or disconnect power to the appliance before beginning work

This refrigerator door gasket creates a tight seal around the door to help maintain proper temperature and reduce energy loss. It replaces a worn or damaged seal to improve cooling consistency and prevent moisture buildup. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost, condensation, and food spoilage caused by air leaks
• Reduces compressor runtime and energy waste from a failing seal
• Restores proper door closure when the original gasket is cracked, torn, or warped

• Inspect the door and gasket channel for debris before installing; clean surfaces for best fit
• Replace gasket with door empty or items moved to avoid interference during installation
• Seat the gasket fully into the channel and allow magnetic gaskets to snap into place; heat (hair dryer) can help soften rigid gaskets for final seating if needed

Note: Quantity of two brackets

Replacement mounting screw used to secure panels and small components on compatible appliances. Restores proper fastening to reduce rattling and keep trim, control panels and brackets aligned for safe, quiet operation. What it does:

• Secures panels, trim, brackets and other small appliance components.
• Replaces loose, missing or damaged fasteners that can cause rattling, gaps or panel misalignment.
• Restores mechanical stability for control panels and interior trim pieces.

• Disconnect power to the appliance before servicing any panels or components.
• Use the correct screwdriver and start the screw by hand to avoid cross-threading.
• Tighten securely but do not overtighten; replace if threads are stripped or the screw will not secure the part.

This cabinet insulation fits inside the refrigerator cabinet to help reduce heat transfer, improve cooling efficiency, and quiet normal operation. Replace worn or missing insulation to help the appliance maintain consistent temperatures. What it does:

• Provides thermal barrier between the cabinet and liner to reduce heat gain
• Helps prevent frost buildup and localized warm spots inside the fresh food/freezer compartments
• Can reduce extended compressor run times caused by poor insulation
• Dampens vibration and reduces operating noise

• Insulation part as shown

• Disconnect power to the appliance before beginning any disassembly
• Access typically requires removing interior liners or exterior panels; keep fasteners organized
• Handle insulation carefully to avoid compression or tearing; wear gloves and eye protection if fiberglass is exposed

This stainless steel cleaner restores and protects stainless surfaces, removing fingerprints, smudges and light soils to improve appearance and make routine cleaning easier. Safe for finished stainless when used as directed. What it does:

• Cleans away fingerprints, grease, and light residue from stainless surfaces
• Restores a streak-free shine and improves overall appearance
• Helps reduce visible smudges for easier routine maintenance
• Leaves a light protective finish that helps resist fingerprints between applications

• Read and follow the product label before use; test on an inconspicuous area first
• Apply to a soft cloth and wipe with the grain of the stainless; avoid abrasive pads
• Do not use on hot surfaces, painted finishes, or unsealed metals unless manufacturer approves
• Keep out of reach of children and avoid contact with eyes; if contact occurs, rinse thoroughly