Parts for Kenmore 911.32356590 (91132356590, 911 32356590): Main Top Parts

Large

Medium

This is a medium burner bowl, also sometimes known as a drip pan, and it is made for ranges, stoves, and cooktops. This is a genuine replacement part made by General Electric. The burner bowl is situated underneath the heating element and is able to catch any food or debris that falls when cooking. The bowl or drop pan is there to catch any and all waste so that the user may easily clean up after the heat is turned off and the appliance is cooled down.A new medium burner bowl might be needed if the current one is damaged in any way including being broken or bent so that is it not fully secure under the burner. This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with ranges, stoves, or cooktops made by General Electric.

This small burner bowl sits beneath a surface coil element to catch drips and help keep the cooktop clean and protected. Replacing a damaged or stained bowl restores a neat appearance and proper support for the element.

• Collects spills beneath the surface element and shields internal components
• Supports the coil so it sits correctly in the burner opening
• Replace when rusted, warped, discolored, or missing
• Helps make cleanup easier after boilovers and everyday cooking

• Disconnect power before servicing the range
• Allow the surface element to cool completely
• Lift out the surface element and old bowl; position the new bowl, then reconnect the element
• Verify the element is seated firmly and level before restoring power

This is a large burner bowl replacement that can work with many models of stoves and ranges. Another term for these bowls is drip pan. The purpose of the drip pans is to protect the inner workings of the stove. They catch spills and drips when cooking. The stove shouldn't be used if the drip pans are damaged or missing.The main reason that the burner bowl might need to be replaced is that it has become dirty and can't be easily cleaned. Additionally, there is the chance that the burner bowls could eventually start to rust. This is a simple repair and should take only a few minutes. Be sure to unplug the stove or turn off the gas before starting a repair.The large burner bowl is for use with certain models of range from Whirlpool, General Electric, Kenmore, and Hotpoint. It is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

The Burner Bowl MD is an OEM part for GE ranges and cooktops. It is designed to sit beneath the burner element, catching spills and drips during cooking while also helping to direct heat upwards towards the cookware. This component helps maintain cleanliness and efficiency in the cooking area.

Causes of a bad burner bowl can include wear and tear from frequent use, staining or charring from spills, and corrosion from exposure to moisture and cleaning chemicals. Physical damage or warping from high heat can also impair its functionality.

Symptoms of a bad Burner Bowl MD include:

• Visible rust or corrosion
• Difficulty in properly fitting the burner element
• Accumulation of food debris or stains that are hard to clean
• Heat being unevenly distributed or directed away from cookware

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Bowl Large is an OEM component for GE gas cooktops and ranges. It refers to the metal pan that sits beneath one of the large front burners on the appliance. 

Over time and with heavy use, exposed burner bowls can develop warping from intense heat. Grease and food residue buildup inside the bowl is also common and causes reduced performance if not cleaned regularly. 

Symptoms of a warped or clogged burner bowl include: 

• Uneven or abnormal burner flame patterns
• Slow boiling or heating of cookware placed above 
• Potential gas smells if warping allows leaks around the bowl
• Residue that cannot be removed with regular cleaning 

This burner bowl is also compatible with some Kenmore, Hotpoint, and RCA gas ranges.

Please note: These are a dark grey replacing light grey

The Burner Grate is an OEM part for GE gas ranges. This component supports cookware above the burner, allowing for even heating and stable placement of pots and pans during cooking. 

Causes of a bad burner grate can include prolonged exposure to high heat, accidental dropping or impact, or wear and tear from frequent use. A damaged grate can affect cooking efficiency and safety by causing instability for cookware.

Symptoms of a bad burner grate include:

• Cracks or chips in the grate
• Uneven or unstable cooking surface
• Rust or discoloration
• Difficulty in placing pots and pans securely

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Electrode is an OEM part for GE gas cooktops and ranges. This component is responsible for igniting the surface burners. They are also often referred to as spark igniters.

Causes of a bad electrode can include cracks, mineral deposits, or damage accumulated from regular usage over many heating cycles. Heat exposure degrades the material integrity of the tip.

Symptoms of a bad electrode include:

• Surface burners failing to light or ignite when turned on
• The igniter glows but flames do not ignite
• Intermittent or inconsistent ignition of burners
• Visible wear, cracks or corrosion on the electrode tip

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This small metal clip secures the surface burner spark electrode to its bracket or burner base, holding the tip at the proper gap for reliable ignition. Replace a missing, bent, or corroded clip to help restore consistent sparking.

• Holds the surface burner spark electrode firmly in position near the burner head
• Maintains correct alignment and gap so the igniter can spark to the burner
• Can help with delayed ignition, intermittent sparking, or a burner that won't light
• Typical signs include a loose/wobbly electrode, visible damage, or a missing clip

What's included: 1 mounting clip Install notes:

• Disconnect power and shut off gas before servicing
• Lift the cooktop or remove burner components to access the electrode; note clip orientation
• Transfer the electrode into the new clip and seat the clip securely in its bracket or base
• Avoid stressing the electrode's ceramic insulator; verify the tip is aimed at the burner rim and test ignition

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold