Mastercraft Tractor

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

This is an upper housing that is used with many models of lawnmowers and lawn tractors. The part is made of durable metal and has the responsibility of protecting many of the interior parts of the lawnmower. Over time, the upper housing can be damaged or may break. It can also be lost and will need to be replaced with a new OEM component. If the housing is damaged or cannot be found, the part should be replaced.Basic tools like a screwdriver and socket may be needed for this project process. A pair of work gloves will also be useful for the process. Before replacing the upper housing, make sure the lawnmower is placed on a sturdy surface and in the off position. The spark plug wire should be disconnected for safety reasons. Use the tools to remove the old damaged part from the lawnmower before installing the new one in its place.This upper housing is designed to compatible with lawnmowers and lawn tractors manufactured by Montgomery Wards, MTD, Ryobi, and Yard Machines. It is an authentic OEM replacement part that is directly sourced from the manufacturer. This component is sold individually.

This actuator spring is a genuine MTD part, sold individually. This actuator spring can be used as a replacement part in a lawn mower. The purpose of the actuator spring, also known as a seat spring switch, in a lawn mower is to provide a plate upon which the seat switch can conduct its electrical current while being held stably in place.If the actuator spring slides out of place and cannot be reinstalled or if it is bent, broken, dented, or worn beyond repair, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This actuator spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This replacement part is a plastic tube. This is a genuine replacement part made by MTD. This part is very versatile and can be used in lawn mowers or other appliances. A new plastic tube might be needed if the current one is missing or damaged in any way. If the tube is bent, dented, cracked, or chipped, it might be time to replace this part. Wear work gloves while completing this repair. The engine should be completely turned off and cooled down before beginning this job. Refer to the user manual for more specific instructions on how to replace this part. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This axle cap is a genuine MTD part, sold individually. This axle cap can be used as a replacement part for a lawn mower. The purpose of the axle cap is to provide covering and protection for the axle.The axle cap might have to be replaced at some point in the lifespan of the lawn mower if it is compromised or damaged to the point that it cannot protect the axle. If the axle cap is chipped, cracked, punctured, or eroded, the component should be removed and replaced by this genuine OEM replacement part so the axle is not subject to any undue damage. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle cap is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, Montgomery Wards, and Huskee.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

This replacement part is a washer. This part is a genuine replacement part made by MTD. Washers are an important part of many different types of appliances. These small pieces work together with nuts and screws to help different parts of the machine stay in place and secure so that everything operates smoothly. A new washer might be needed if the current one is missing or damaged in any way. It is possible that washers can become stripped over time and might not stay in place. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. Be sure to wear work gloves during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This part is a replacement flat washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or lost flat washer in outdoor power equipment.Flat washers are a standard piece of hardware that can be used on many types of equipment. They enable screws or bolts to tightly fix components together by providing a larger bearing surface. Lost or defective washers should be replaced. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular flat washer, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This flat washer can be used with outdoor power equipment manufactured by Craftsman, MTD, Troy-Bilt, and other brands.

This part is a replacement grease fitting. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current grease fitting is defective or broken, this part can be used as a replacement. It is intended for use with a variety of chipper models.The grease fitting feeds lubricants into the equipment's bearings. This part will require replacement with a genuine OEM part if broken, detached, or rendered ineffective in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this grease fitting, the appropriate owner's manual and equipment diagrams should be referred to. This grease fitting is suitable for use on a variety of chipper models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This is a replacement screw that is a genuine part for select outdoor power equipment units. The shoulder screw is a unique screw that is designed to provide a secure fit while still allowing the unit the joint that it needs to operate properly. Depending on the unit and application, this screw is designed to provide rotation for pulleys, gears, and other moving parts. When they are damaged or wear out, or the threads strip, they will need to be replaced. There are several incidents that could cause damage to a shoulder screw. Regardless, a replacement with this genuine OEM part will be necessary. This OEM shoulder screw is manufactured to exact specifications and can be used with models from Cub Cadet, MTD, and Troy-Bilt. This part will require a socket or nut driver to replace. The shoulder screw is a fairly simple replacement. Allow the unit to cool and wear gloves for hand protection. Since this part has multiple applications, owners should consult their parts diagram for the exact placement of this shoulder screw. The screw is sold individually.

Shoulder screws are a type of fastener used in many types of lawn and garden equipment. Also called stripper bolts or shoulder bolts, they have a head, threads, and an unthreaded shoulder. These screws are used in areas where items need to be held together in a specific location. They can be used with bearings, bushings, and machinery support. Shoulder screws are made of durable metal but can still experience breakage or damage. When this occurs, the screws will need to be replaced. A wrench can be used to remove the damaged shoulder screw. First, visually inspect the shoulder screw to look for damage or corrosion. Sometimes, the screw will be entirely broken. If any of these things are present, a wrench can be used to remove the old shoulder screw. The same tool can be used to insert a new shoulder screw before reassembling the equipment.Designed for lawnmowers, lawn tractors, tillers, leaf blowers, chainsaws, log splitters, chipper shredders, and snowblowers, this part is compatible with items from Yard Machines, MTD, Cub Cadet, Craftsman, Toro, Huskee, Montgomery Wards, Yard-Man, MasterCut, and Troy-Bilt. The locknut is sold separately.

This replacement part is a steering shaft intended for use in lawn mowers. This is a genuine replacement part made by MTD. Without the steering shaft the user might not be able to turn the wheels of the lawn mower in the proper direction. A new steering shaft might be needed if the current one is not working properly or is damaged or broken in any way. It is possible that the part will need to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This part is a replacement flange bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective, worn, or broken flange bearing in various models of outdoor power equipment.Bearings reduce friction between moving parts and thus are essential to proper equipment functionality. Bearings may become worn, corroded, or ineffective over time and thus will need to be replaced with a genuine OEM replacement part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this flanged bearing, the appropriate owner's manual and equipment diagrams should be referred to. This flange bearing is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.